WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#M00649840620
257-8150: EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
S/N 5A81-UP
PART OF 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
S/N 5A81-UP
PART OF 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9378 | [1] | BIT-END (LH) | |
| 2. | 8E-9379 | [1] | BIT-END (RH) | |
| 3. | 278-2168 | [2] | EDGE-CUTTING | |
| 4. | 278-2169 | [1] | EDGE-CUTTING | |
| 5. | 278-2170 | [1] | EDGE-CUTTING | |
| 6. | 2J-3506 | [28] | NUT-FULL (3/4-10-THD) | |
| 7. | 5J-4773 | [28] | BOLT-PLOW (3/4-10X2.5-IN) | |
| 8. | 5P-8248 | [28] | WASHER-HARD (20X36.5X3.5-MM THK) |
#M00649840621
4T-2314: EDGE GP-BIT & CUTTING
4T-2314 EDGE GP-BIT & CUTTING
S/N AA31-UP; 5A71-UP
PART OF 359-3410, 386-7276 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N AA31-UP; 5A71-UP
PART OF 359-3410, 386-7276 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
#M00649840622
8E-9380: EDGE GP-BIT & CUTTING
8E-9380 EDGE GP-BIT & CUTTING
S/N 5A51-UP
PART OF 358-2210 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N 5A51-UP
PART OF 358-2210 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00649840623
500-1940: EDGE-CUTTING
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00649840624
359-3346: MOUNTING GP-RIPPER
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0063 | [2] | PIN | |
| 2. | 3A-8613 | [1] | BRACKET AS (LH) | |
| 3. | 3A-8614 | [1] | BRACKET AS (RH) | |
| 4. | 9N-4450 | [12] | SPACER (68X120X5-MM THK) | |
| 5. | 114-5671 | [1] | PLATE AS (RH) | |
| 6. | 114-5672 | [1] | PLATE AS (LH) | |
| 7. | 193-3074 | [2] | SPACER (52X120X5-MM THK) | |
| 8. | 1U-0159 | [2] | PIN | |
| 9. | 6K-8987 | [2] | DOWEL | |
| 10. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 11. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 12. | 8T-4123 | [26] | WASHER (22X35X3.5-MM THK) | |
| 13. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 14. | 8T-5412 M | [2] | BOLT (M12X1.75X140-MM) | |
| 15. | 8T-6430 M | [26] | BOLT (M20X2.5X50-MM) | |
| M | METRIC PART | |||
#M00649840625
432-5811: RIPPER AR
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 240-1469 | [1] | PLATE & FILM GP | |
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| 2. | 359-3346 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 432-5812 Y | [1] | RIPPER GP | |
| 4. | 446-0722 Y | [1] | LINES GP-RIPPER | |
| 5. | 448-4913 Y | [1] | CYLINDER GP-RIPPER | |
| 6. | 481-7828 Y | [1] | GUARD GP-FUEL TANK | |
| Y | SEPARATE ILLUSTRATION | |||
#M00649840626
432-5812: RIPPER GP
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3A-8612 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 2A. | 7J-9682 | [2] | BUSHING | |
| 3. | 3B-8489 | [11] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 3K-8510 | [1] | PIN | |
| 5. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 6H-3616 | [4] | PLUG-PROTECTION | |
| 7. | 9T-5900 B | [6] | WASHER (51.2X98X4.76-MM THK) | |
| 8. | 322-3353 | [1] | CARRIAGE AS | |
| 8P-9770 | [1] | PLATE | ||
| 9. | 329-3356 M | [8] | NUT (M12X1.75-THD) | |
| 10. | 432-5813 | [1] | LINK AS | |
| 10A. | 9W-0099 | [4] | BUSHING | |
| 11. | 1U-0159 | [2] | PIN | |
| 12. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 15. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 17. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 19. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 20. | 9J-9598 | [2] | PIN | |
| 21. | 3B-5325 | [1] | PIN-COTTER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00649840627
8J-2189: TOOTH GP-RIPPER
For full view, you need register
#M00649840628
9J-8926: TOOTH GP-RIPPER
For full view, you need register
#M00649840629
391-9517: FILM GP
For full view, you need register
Parts for your D5R2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 292-4396 | [1] | FILM-IDENTIFICATION (CAT, REAR) | |
| 2. | 294-4614 | [1] | FILM-STRIPE (CAT, RH) | |
| 3. | 294-4615 | [1] | FILM-STRIPE (CAT, LH) | |
| 4. | 392-7132 | [1] | FILM-IDENTIFICATION (CAT) | |
| 5. | 482-1878 | [1] | FILM-IDENTIFICATION (D5R2 XL, LH) | |
| 6. | 482-1879 | [1] | FILM-IDENTIFICATION (D5R2 XL, RH) |
