AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

398-3159 CONTROL GP-THICKNESS S/N 4801-UP; 4791-UP PART OF 474-7996, 522-0299 STANDARD AR AN ATTACHMENT AP655F


CONTROLS
CONTROL GP-THICKNESS
CROWN GP
ADJUSTER GP
MOTOR GP-POWER ADJUSTER
CROWN GP
SLOPER GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP

ASPHALT PAVER AP655F ASPHALT PAVER 479
 AP655F Asphalt Paver 47900001-UP (MACHINE) POWERED BY C7.1 Engine M0065148 AP655F 479   (2015)

CONTROLS

CONTROL GP-THICKNESS
ADJUSTER GP-HEIGHT
390-4826 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
390-4826 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
428-4927 ADJUSTER GP-HEIGHT
CONTROL GP-THICKNESS
390-4949 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
398-3159 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
437-0052 CONTROL GP-THICKNESS
 

#M00651480110
 

398-3159: CONTROL GP-THICKNESS

398-3159 CONTROL GP-THICKNESS
S/N 4801-UP; 4791-UP
PART OF 474-7996, 522-0299 STANDARD AR
AN ATTACHMENT
i06533160 M0065148
3983159 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3P-8680 [4] CUP-BEARING  
3. 279-6482 [4] SPACER (38X21X20-MM THK)  
4. 333-1704 [2] SHAFT  
5. 394-3893 [2] BLOCK-BEARING  
6. 431-1472 [2] PLATE  
7. 431-1963 [2] POINTER  
8. 466-7521 [2] TUBE AS  
9. 448-0602 [4] PAD  
10. 448-0603 [2] PIN  
11. 448-5516 [2] ROD AS  
12. 1J-8136 [2] PIN-SPRING  
13. 3P-8681 [4] CONE-BEARING  
15. 6V-7676 M [2] NUT (M24X3-THD)  
16. 7X-7729 [6] WASHER (11X25X3-MM THK)  
17. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
18. 8T-5460 M [4] BOLT (M20X2.5X40-MM)  
19. 9M-1975 [2] RING-RETAINING  
20. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  M   METRIC PART
 

#M00651480111
 

437-0052: CONTROL GP-THICKNESS

437-0052 CONTROL GP-THICKNESS
S/N 4801-UP; 4791-UP
PART OF 428-4850, 522-1493 SCREED AR
AN ATTACHMENT
i06533046 M0065148
4370052 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7915 [2] ROD END  
2. 425-3516 [4] PIN  
3. 479-2087 [2] LINK GP-PITCH  
    (EACH INCLUDES)
  201-5541 M [1] NUT (M27X2-THD)  
  241-8253 M [1] NUT (M27X2-THD)  
4. 486-7584 [2] FILM-IDENTIFICATION  
5. 490-0125 [2] ROD  
6. 344-5674 M [2] NUT (M8X1.25-THD)  
7. 3P-9554 [2] GROMMET  
8. 5P-8837 [4] LOCK PIN  
9. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#M00651480112
 

390-4798: CROWN GP-POWER

390-4798 CROWN GP-POWER
S/N 4801-UP; 4791-UP
PART OF 474-7996, 522-0299 STANDARD AR
AN ATTACHMENT
i06533161 M0065148
3904798 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 364-7062 [2] PIN  
3. 416-7502 [2] SHAFT GP-DRIVE  
4. 416-7507 [1] PLATE AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
5. 416-7509 [1] SPROCKET GP  
  010-2580 [2] SETSCREW-HEX SOCKET  
6. 416-7510 [1] CHAIN GP-SCREED  
  102-2687 [1] LINK-CONNECTING  
  195-9533 [1] LINK-OFFSET  
7. 416-7545 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
8. 450-5670 [1] PLATE  
9. 450-5711 B [6] SHIM  
10. 450-8211 [2] BALL JOINT AS  
11. 068-6405 [8] WASHER (26X63.5X6-MM THK)  
12. 5J-3941 [2] PIN-SPRING  
13. 5P-8248 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
14. 5P-8837 [2] LOCK PIN  
15. 6D-1733 [4] CONE-BEARING  
16. 6D-1734 [4] CUP-BEARING  
17. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
18. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
20. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
21. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
22. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
23. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
24. 9X-8258 [2] WASHER (33X56X6-MM THK)  
26. 481-5710 [2] STRIP  
27. 481-5711 [2] STRIP  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00651480113
 

437-0050: CROWN GP-POWER

437-0050 CROWN GP-POWER
S/N 4801-UP; 4791-UP
PART OF 428-4857 MACHINE AR
AN ATTACHMENT
i06533026 M0065148
4370050 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 102-2701 [2] BEARING  
4. 102-2739 [1] KEY-SQUARE  
5. 282-0630 [1] BRACKET  
6. 282-0633 [1] PLATE  
7. 282-0637 [1] SHAFT AS-ADJUSTMENT  
8. 282-0642 [1] BRACKET AS  
9. 282-8478 [2] BALL JOINT AS  
10. 334-2654 Y [2] SHAFT GP-DRIVE (NON-ACTUATED)  
11. 351-0194 [1] CHAIN GP  
  102-2687 [1] LINK-CONNECTING  
  195-9533 [1] LINK-OFFSET  
12. 440-9904 [2] PIN AS  
13. 133-3260 [2] SPACER (11X19X10-MM THK)  
14. 277-2004 Y [1] MOTOR GP-POWER ADJUSTER (ACTUATED)  
15. 3P-8680 [4] CUP-BEARING  
16. 3P-8681 [4] CONE-BEARING  
17. 4L-6454 [2] BOLT (3/8-16X1-IN)  
18. 5C-2890 M [4] NUT (M6X1-THD)  
19. 5C-9553 M [4] BOLT (M6X1X16-MM)  
20. 5J-3941 [2] PIN-SPRING  
21. 6V-7676 M [2] NUT (M24X3-THD)  
22. 7X-7729 [2] WASHER (11X25X3-MM THK)  
23. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4133 M [4] NUT (M10X1.5-THD)  
25. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
26. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
27. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
28. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
29. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
31. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4244 M [2] NUT (M12X1.75-THD)  
33. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
34. 6V-8190 [2] NUT (1-8-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00651480114
 

433-1509: JACK GP-HEIGHT ADJUSTER

433-1509 JACK GP-HEIGHT ADJUSTER
S/N 4801-UP; 4791-UP
PART OF 437-0070, 442-1881 GATE GP-END
AN ATTACHMENT
i06533071 M0065148
4331509 JACK GP-HEIGHT ADJUSTER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 433-1508 [4] ACTUATOR AS  
2. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
3. 8C-6894 M [4] BOLT (M20X2.5X300-MM)  
4. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
5. 8T-5439 [4] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
 

#M00651480115
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER
S/N 4801-UP; 4791-UP
24-VOLT
PART OF 437-0050 CROWN GP-POWER
AN ATTACHMENT
i06533034 M0065148
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00651480116
 

334-2654: SHAFT GP-DRIVE

334-2654 SHAFT GP-DRIVE -NON-ACTUATED
S/N 4801-UP; 4791-UP
PART OF 437-0050 CROWN GP-POWER
AN ATTACHMENT
i06540593 M0065148
3342654 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 334-2655 [1] SPINDLE AS  
 

#M00651480117
 

390-4768: SLOPER GP-POWER

390-4768 SLOPER GP-POWER
S/N 4801-UP; 4791-UP
PART OF 474-7996, 522-0299 STANDARD AR
AN ATTACHMENT
i06533168 M0065148
3904768 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9B-0143 [2] LOCKWASHER  
2. 394-5234 [2] JACK GP-HEIGHT ADJUSTER  
3. 398-7433 [1] SUPPORT AS (RH)  
4. 398-7434 [1] SUPPORT AS (LH)  
    (EACH SUPPORT AS INCLUDES)
  355-8941 M [4] NUT-WELD (M16X2-THD)  
5. 399-5120 [1] BOX (RH)  
6. 399-5121 [1] BOX (LH)  
7. 416-7942 [2] CLEVIS  
8. 416-7944 [2] PIN AS-PIVOT  
9. 416-7947 [2] PIVOT  
10. 457-8959 [4] BUSHING  
11. 457-8960 [4] BUSHING  
12. 421-3184 [4] RING-RETAINING  
13. 421-4006 [4] RING-RETAINING  
14. 423-0907 [4] SPACER (21.5X38.1X29-MM THK)  
15. 425-3516 [2] PIN  
16. 425-9252 [2] COUPLING AS  
17. 425-9253 [2] COUPLING AS  
    (EACH COUPLING AS INCLUDES)
  5J-3182 [1] SETSCREW-HEX SOCKET  
18. 425-9254 [2] SPIDER  
19. 444-8037 [2] STOP  
20. 1D-6306 [2] NUT (1-8-THD)  
21. 5P-5813 [4] LOCKNUT-BEARING (2.75X18-THD)  
22. 5P-8837 [2] LOCK PIN  
23. 7X-0510 [4] WASHER-HARD (15.5X29X3-MM THK)  
24. 7X-2555 M [2] BOLT (M16X2X80-MM)  
25. 7X-2581 M [4] BOLT (M30X3.5X100-MM)  
26. 8C-6854 M [4] BOLT (M14X2X50-MM)  
27. 8C-8722 M [4] NUT (M30X3.5-THD)  
28. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
29. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4132 M [2] NUT (M16X2-THD)  
31. 8T-4193 M [8] BOLT (M16X2X50-MM)  
32. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
33. 8T-6430 M [4] BOLT (M20X2.5X50-MM)  
34. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
35. 9X-8258 [4] WASHER (33X56X6-MM THK)  
  M   METRIC PART
 

#M00651480118
 

437-0054: SLOPER GP-POWER

437-0054 SLOPER GP-POWER
S/N 4801-UP; 4791-UP
PART OF 428-4850, 522-1493 SCREED AR
AN ATTACHMENT
i06533047 M0065148
4370054 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3778 [4] LOCKNUT  
2. 065-7893 [2] LOCKWASHER-BEARING  
3. 421-3184 [8] RING-RETAINING  
4. 441-7518 [2] PLATE  
5. 441-7519 [2] PIN AS-PIVOT  
6. 442-4787 [1] BOX (LH)  
7. 457-8959 [8] BUSHING  
8. 462-2991 [1] BOX (RH)  
9. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
10. 7X-0529 [4] WASHER-HARD (28X49X6-MM THK)  
11. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
12. 8T-5878 M [4] BOLT (M24X3X80-MM)  
  M   METRIC PART
 

#M00651480119
 

3E-6328: ALARM GP

3E-6328 ALARM GP
S/N 4801-UP; 4791-UP
PART OF 424-9120 WIRING GP-ELECTRONIC CONTROL
i02528659 M0065148
3E6328 ALARM GP Parts scheme
  For full view, you need register

Parts for your AP655F ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

Information:

Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING EXTENDER HEIGHT ADJUSTMENT SYSTEM ON CERTAIN SE50 V, SE50 VT, AND SE60 V SCREEDS
PRODUCT SUPPORT PROGRAM FOR UPDATING EXTENDER HEIGHT ADJUSTMENT SYSTEM ON CERTAIN SE50 V, SE50 VT, AND SE60 V SCREEDS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Thickness Control
AP655F and AP655F L Asphalt Paver Machine Systems
Thickness Control
AP655F and AP655F L Asphalt Paver Machine Systems
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING EXTENDER HEIGHT ADJUSTMENT SYSTEM ON CERTAIN SE50 V, SE50 VT, AND SE60 V SCREEDS
PRODUCT SUPPORT PROGRAM FOR UPDATING EXTENDER HEIGHT ADJUSTMENT SYSTEM ON CERTAIN SE50 V, SE50 VT, AND SE60 V SCREEDS
Service Letter-Asia
Service Letter-APD

Caterpillar Parts SIS Catalog AP655F :

CONTROL GP-THICKNESS
390-4949 CONTROL GP-THICKNESS
473-3320 ADJUSTER GP-POWER
ADJUSTER GP-POWER
473-3319 ADJUSTER GP-POWER
450-6610 ADJUSTER GP-POWER
ADJUSTER GP-MANUAL
450-6608 ADJUSTER GP-MANUAL
ADJUSTER GP-HEIGHT
428-4927 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
390-4826 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
390-4826 ADJUSTER GP-HEIGHT
CONTROL GP-THICKNESS
437-0052 CONTROL GP-THICKNESS
CROWN GP-POWER
390-4798 CROWN GP-POWER
CROWN GP-POWER
437-0050 CROWN GP-POWER
JACK GP-HEIGHT ADJUSTER
433-1509 JACK GP-HEIGHT ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
334-2654 SHAFT GP-DRIVE
SLOPER GP-POWER
390-4768 SLOPER GP-POWER
SLOPER GP-POWER
437-0054 SLOPER GP-POWER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.