AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

560-4494 KIT-RIDE CONTROL S/N M5T1-UP 950 GC WHEEL LOADER


HYDRAULIC SYSTEM
CONTROL GP-RIDE
CYLINDER GP
LINES GP-FRONT
LINES GP-HYDRAULIC
LINES GP-PILOT

WHEEL LOADER 950 GC WHEEL LOADER M5T
 950GC Wheel Loader M5T00001-UP (MACHINE) POWERED BY C7.1 Engine M0066082 950 GC M5T   (2016)

HYDRAULIC SYSTEM

CONTROL GP-RIDE
KIT-RIDE CONTROL
560-4494 KIT-RIDE CONTROL
 

#M00660820430
 

560-4494: KIT-RIDE CONTROL

560-4494 KIT-RIDE CONTROL
S/N M5T1-UP
i07553169 M0066082
5604494 KIT-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 518-8387 M [4] BOLT (M8X1.25X20-MM)  
2. 524-6917 [2] BOLT  
3. 518-4415 [2] WASHER (6.4X12X1.6-MM THK)  
4. 518-9736 [4] WASHER (8.8X20.5X2-MM THK)  
5. 224-0672 [1] FILM-WARNING (HIGH PRESSURE, READ OMM, INTL)  
6. 499-1149 [2] COUPLING AS  
7. 124-2114 [3] COUPLING  
8. 124-2130 [1] COUPLING  
9. 124-2144 [2] COUPLING AS-PERMANENT  
10. 236-4612 [1] SWITCH AS-ROCKER (24-VOLT)(RIDE CONTROL)  
11. 360-8161 [2] CLAMP (ACCUMULATOR)  
12. 385-0693 Y [1] VALVE & MTG GP-SOLENOID (RIDE CONTROL)  
13. 3J-1907 [4] SEAL-O-RING  
14. 435-1332 Y [1] ACCUMULATOR GP-RIDE CONTROL (UNCHARGED)  
15. 438-5437 [1] FILM-WARNING (HOT FLUID UNDER PRESSURE)  
16. 451-5885 Y [1] VALVE GP-MAIN CONTROL (RIDE CONTROL)  
17. 5K-9090 [2] SEAL-O-RING  
18. 6V-8397 [8] SEAL-O-RING  
19. 6V-8636 [1] CONNECTOR  
20. 6V-8724 [3] ELBOW  
21. 6V-9008 [2] ELBOW  
22. 6V-9836 [2] TEE-SWIVEL  
23. 7M-8485 [2] SEAL-O-RING  
24. 456-8470 E HOSE (97-CM)  
25. 456-8410 E HOSE (24-CM)  
25A. 456-8410 E HOSE (42-CM)  
25B. 456-8410 E HOSE (36-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00660820431
 

323-9292: LINES GP-COUPLER

323-9292 LINES GP-COUPLER
S/N M5T1-UP
FOR USE WITH 950H, 962H, 966H & 972H WHEEL LOADERS
i07553131 M0066082
3239292 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-2888 [2] FITTING AS (QUICK DISCONNECT, MALE)  
2. 6W-2890 [2] CAP AS-DUST  
3. 150-5430 [2] ADAPTER AS  
    (EACH INCLUDES)
  6V-9746 [1] SEAL-O-RING  
  163-3343 [1] SEAL  
4. 151-2184 [2] PLATE-BRACKET  
5. 323-9293 I [2] HOSE AS  
6. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
7. 4J-0522 [2] SEAL-O-RING  
8. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
9. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4244 M [4] NUT (M12X1.75-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00660820432
 

468-0816: LINES GP-COUPLER

468-0816 LINES GP-COUPLER
S/N M5T1-UP
PART OF 550-7693, 560-3914, 560-3915 DISTRIBUTION AR
i06833669 M0066082
4680816 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 468-0818 Y [1] LINES GP-COUPLER  
2. 474-6211 Y [1] SWITCH GP-QUICK COUPLER  
3. 474-6214 Y [1] WIRING GP-QUICK COUPLER  
  Y   SEPARATE ILLUSTRATION
 

#M00660820433
 

468-0818: LINES GP-COUPLER

468-0818 LINES GP-COUPLER
S/N M5T1-UP
PART OF 468-0816 LINES GP-COUPLER
i06833689 M0066082
4680818 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
2. 154-5020 I [1] HOSE AS  
3. 222-6869 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  9X-2614 [1] CONNECTOR  
4. 230-7058 [1] BRACKET  
5. 390-7970 [1] MANIFOLD GP-CONTROL  
  390-7508 [1] VALVE GP-SOLENOID (COUPLER MANIFOLD)  
  254-0072 [1] COIL AS (24-VOLT)  
  390-7972 [1] MANIFOLD  
6. 397-9718 [1] BRACKET AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
7. 397-9724 [1] BRACKET AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
8. 397-9865 [1] BRACKET  
9. 446-6959 [1] SPACER (11X30X20-MM THK)  
10. 489-1697 I [2] HOSE AS  
11. 489-1698 I [1] HOSE AS  
12. 112-1817 [2] VALVE-BALL  
13. 121-4405 M [8] BOLT (M4X0.7X12-MM)  
14. 148-8336 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
15. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
16. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
17. 4B-4674 [10] WASHER (6.4X14.5X1.6-MM THK)  
18. 6D-4246 [4] CLIP (LOOP)  
19. 6V-9829 [2] CAP (ORFS)  
20. 8C-8451 M [2] BOLT (M6X1X40-MM)  
21. 8M-2773 [12] CLIP (LOOP)  
22. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
24. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
25. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00660820434
 

530-2463: LINES GP-COUPLER

530-2463 LINES GP-COUPLER
S/N M5T1-UP
FOR USE WITH @@@@@310-9391@@@@@
i07378292 M0066082
5302463 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2534 M [2] BOLT (M6X1X50-MM)  
2. 5C-2890 M [2] NUT (M6X1-THD)  
3. 6V-9829 [2] CAP (ORFS)  
4. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [16] BOLT (M10X1.5X20-MM)  
6. 9R-2821 M [4] BOSS (M10X1.5X15-MM)  
7. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
8. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
9. 112-1817 [2] VALVE-BALL  
10. 121-4405 M [8] BOLT (M4X0.7X12-MM)  
11. 148-8321 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8C-0564 [1] CONNECTOR  
12. 148-8336 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
13. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
14. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
15. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
16. 154-5020 I [1] HOSE AS  
17. I [1] HOSE AS  
18. 163-9662 M [1] BOSS-THREADED (M12X1.75-THD)  
19. 324-3471 [1] BRACKET  
20. 390-7970 [1] MANIFOLD GP-CONTROL (COUPLER)  
  390-7508 [1] VALVE GP-SOLENOID (COUPLER MANIFOLD)  
  254-0072 [1] COIL AS (24-VOLT)  
  390-7972 [1] MANIFOLD  
21. 9C-4935 [2] PLATE  
22. 533-0870 [1] BRACKET  
23. 533-3187 [1] BRACKET AS  
24. 533-3324 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
25. 533-4378 I [2] HOSE AS  
26. 536-6864 Y [1] WIRING GP-QUICK COUPLER  
27. 6D-4246 [16] CLIP (LOOP)  
   
  474-6211 FY [1] SWITCH GP-QUICK COUPLER  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00660820435
 

552-3776: LINES GP-COUPLER

552-3776 LINES GP-COUPLER
S/N M5T1-UP
PART OF 552-4912 OPTION AR-COUPLER
i07558713 M0066082
5523776 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2281 [3] STRAP-CABLE  
2. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
3. 7K-1181 [1] STRAP-CABLE  
4. 222-6869 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  9X-2614 [1] CONNECTOR  
5. 230-7058 [1] BRACKET  
6. 390-7970 [1] MANIFOLD GP-CONTROL  
  390-7508 [1] VALVE GP-SOLENOID (COUPLER MANIFOLD)  
  254-0072 [1] COIL AS (24-VOLT)  
  390-7972 [1] MANIFOLD  
7. 397-9724 [1] BRACKET AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
8. 397-9865 [1] BRACKET  
9. 446-6959 [1] SPACER (11X30X20-MM THK)  
10. 489-1698 I [1] HOSE AS  
11. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
12. 112-1817 [2] VALVE-BALL  
13. 148-8336 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
14. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
15. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
16. 154-5020 I [1] HOSE AS  
17. 2W-9499 M [2] BOLT (M6X1X40-MM)  
18. 397-9718 [1] BRACKET AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
19. 4B-4674 [2] WASHER (6.4X14.5X1.6-MM THK)  
20. 552-4907 I [2] HOSE AS  
21. 6D-4246 [4] CLIP (LOOP)  
22. 6V-9829 [2] CAP (ORFS)  
23. 8M-2773 [12] CLIP (LOOP)  
24. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
25. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
27. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
28. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
29. 160-2250 G SLEEVE-ABRASION (4-IN)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00660820436
 

390-5914: LINES GP-FRONT

390-5914 LINES GP-FRONT
S/N M5T1-UP
PART OF 397-9894, 397-9895 HYDRAULIC AR-3 VALVE
CANNOT BE USED WITH 390-5913 VALVE GP-MAIN CONTROL
i07005228 M0066082
3905914 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 445-6169 Y [1] VALVE GP-CONTROL  
2. 390-5915 I [1] HOSE AS  
3. 390-5917 I [1] HOSE AS  
5. 390-5921 [1] BRACKET AS  
6. 390-5925 [1] HOSE AS  
7. 390-5931 [2] PLATE  
8. 390-5932 I [2] HOSE AS  
9. 390-5935 I [1] HOSE AS  
10. 489-1706 C [1] TUBE AS  
11. 489-1700 C [1] TUBE AS  
12. 397-9874 [4] CLIP-HALF  
13. 397-9875 [4] CLIP-HALF  
14. 148-8335 [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
15. 150-4047 [1] ADAPTER AS  
  3J-7354 [1] SEAL-O-RING  
  8T-2353 [1] ADAPTER  
16. 148-8352 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
17. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
18. 148-8360 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9182 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
19. 148-8391 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-8987 [1] ELBOW  
20. 148-8455 [2] UNION AS  
    (EACH INCLUDES)
  6V-8997 [1] UNION  
  6V-9746 [2] SEAL-O-RING  
21. 1P-4577 [4] FLANGE-HALF  
22. 1P-4578 [4] FLANGE-HALF  
23. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
24. 4J-0520 [2] SEAL-O-RING  
25. 4J-0522 [2] SEAL-O-RING  
26. 4S-4455 [2] CLIP  
27. 5H-4020 [2] COVER  
28. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
31. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
32. 8T-4195 M [20] BOLT (M10X1.5X30-MM)  
33. 448-2958 I [1] HOSE AS  
34. 6E-4701 CY [1] VALVE GP-CHECK  
35. 204-2281 C [3] STRAP-CABLE  
36. 200-6345 C [2] SADDLE-MOUNTING (DUAL SWIVEL)  
37. 148-8378 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
38. 148-8367 C [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00660820437
 

551-6886: LINES GP-FRONT

551-6886 LINES GP-FRONT -PIN GRABBER
S/N M5T1-UP
QUICK COUPLER
PART OF 553-1396 CONTROL & MTG GP-MACHINE
i07556090 M0066082
5516886 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 3J-1907 [1] SEAL-O-RING  
4. 4I-9521 [4] BAND-MARKER (RED, L1)  
5. 4I-9522 [4] BAND-MARKER (YELLOW, L2)  
6. 7K-1181 [2] STRAP-CABLE  
7. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
9. 164-5546 [1] TEE AS  
  3E-7410 [1] TEE  
  3J-1907 [1] SEAL-O-RING  
10. 203-3470 [1] CONNECTOR  
11. 123-4750 [1] VALVE AS-CHECK  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
12. 148-8378 [5] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
13. 266-1392 I [1] HOSE AS  
14. 275-1818 I [1] HOSE AS  
15. 338-6971 Y [1] SENSOR GP-PRESSURE (HYDRAULIC OIL)  
16. 358-7523 I [1] HOSE AS  
17. 518-3834 [1] HOSE AS  
18. 561-6328 I [1] HOSE AS  
19. 275-1681 I [1] HOSE AS  
20. 524-0912 Y [1] VALVE & MTG GP-SOLENOID (CONTROL VALVE)  
21. 525-2970 [1] SUPPORT AS  
22. 548-8139 [1] PLATE AS  
23. 549-7972 [1] VALVE GP-SOLENOID & PRESS REDC  
24. 7Y-7955 I [1] HOSE AS  
25. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00660820438
 

489-1642: LINES GP-IMPLEMENT

489-1642 LINES GP-IMPLEMENT
S/N M5T1-UP
PART OF 452-7010 HYDRAULIC AR
i06807127 M0066082
4891642 LINES GP-IMPLEMENT Parts scheme 4891642 LINES GP-IMPLEMENT Parts scheme 4891642 LINES GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 390-5896 [1] HOSE-SUCTION  
2. 164-6858 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8778 [1] TEE-FACE SEAL  
  7M-8485 [1] SEAL-O-RING  
3. 6V-0852 [2] CAP-DUST  
4. 7K-1181 [13] STRAP-CABLE  
5. 148-8424 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8T-8902 [1] ADAPTER-TEE  
6. 200-6345 [2] SADDLE-MOUNTING (DUAL SWIVEL)  
7. 204-2281 [4] STRAP-CABLE  
8. 220-2609 [4] CLIP  
9. 355-0319 [1] BLOCK  
10. 367-8969 [1] VALVE GP-PRESSURE REDUCING  
11. 390-5831 [1] TUBE AS  
12. 390-5835 [1] TUBE AS  
13. 390-5837 [1] TUBE AS  
14. 390-5839 I [1] HOSE AS  
15. 390-5841 I [1] HOSE AS  
16. 390-5843 I [2] HOSE AS  
17. 390-5845 I [2] HOSE AS  
18. 390-5847 [1] TUBE AS  
19. 390-5852 [1] TUBE AS  
20. 390-5854 [1] TUBE AS  
21. 390-5856 [1] TUBE AS  
22. 390-5861 [1] TUBE AS  
23. 390-5864 [1] TUBE AS  
24. 390-5867 I [1] HOSE AS  
27. 390-5874 [1] BRACKET  
31. 390-5885 I [1] HOSE AS  
32. 489-1709 I [1] HOSE AS  
33. 390-5898 [1] FITTING AS  
34. 390-5939 [1] FLANGE  
35. 390-5956 [1] BRACKET  
36. 390-5957 [1] PLATE  
37. 390-5958 [6] SLEEVE  
38. 397-9782 [1] BRACKET  
39. 397-9783 [3] CLIP  
40. 397-9784 [3] PLATE  
41. 397-9877 [1] U-BOLT  
42. 448-2957 [2] BRACKET  
43. 448-2962 I [1] HOSE AS  
45. 448-2966 I [1] HOSE AS  
46. 448-2968 [1] PLATE  
47. 448-2969 [1] BLOCK  
48. 448-2976 [1] PLATE AS  
49. 448-2977 [1] BRACKET  
50. 448-2978 [2] CLAMP  
51. 475-8240 [1] TUBE AS  
52. 475-8243 [1] TUBE AS  
53. 475-8247 [1] PLATE AS  
  8T-4133 M [4] NUT (M10X1.5-THD)  
54. 475-8255 I [1] HOSE AS  
55. 489-1638 [2] SPACER (11X30X8-MM THK)  
56. 489-1644 [1] BRACKET  
57. 489-1645 [1] BRACKET  
58. 489-1646 I [1] HOSE AS  
59. 489-1647 I [1] HOSE AS  
60. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
61. 112-1817 [1] VALVE-BALL  
62. 144-7090 [2] CLIP (SLOT)  
63. 144-7091 [2] CLIP (TAB)  
64. 148-8335 [4] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
65. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
66. 148-8361 [1] ELBOW AS (90-DEG)  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9200 [1] ELBOW  
67. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
68. 148-8377 [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
69. 148-8378 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
70. 150-3073 [1] PLUG AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9512 [1] PLUG (1-7/16-12-THD)  
71. 164-5567 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
    (EACH INCLUDES)
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
72. 166-2383 [1] CLAMP  
73. 1P-3703 [1] SEAL-RECTANGULAR  
74. 1P-3704 [1] SEAL-RECTANGULAR  
75. 1P-4577 [12] FLANGE-HALF  
76. 1P-4578 [8] FLANGE-HALF  
77. 1S-0994 [5] CLIP (LOOP)  
78. 5C-2890 M [2] NUT (M6X1-THD)  
79. 266-5360 [2] WASHER (13X37X3-MM THK)  
80. 2R-1939 [1] CLIP  
81. 4B-4674 [4] WASHER (6.4X14.5X1.6-MM THK)  
82. 4J-0520 [11] SEAL-O-RING  
83. 4J-0522 [7] SEAL-O-RING  
84. 5H-8848 [1] SEAL-O-RING  
85. 5P-2369 [1] CLIP (LOOP)  
86. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
87. 5P-6863 [1] CLIP (TAB)  
88. 5P-6864 [1] CLIP (SLOT)  
89. 5P-7468 [1] CLIP (SLOT)  
90. 5P-7469 [1] CLIP (TAB)  
91. 5P-7970 M [1] NUT (M8X1.25-THD)  
92. 5P-8245 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
93. 5P-8444 [1] GROMMET (37-MM ID)  
94. 6V-0400 [2] FLANGE-HALF  
95. 6V-2315 M [2] BOLT (M6X1X35-MM)  
96. 6V-3822 M [31] BOLT (M10X1.5X35-MM)  
97. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
98. 5C-7261 M [2] NUT (M8X1.25-THD)  
99. 6V-9168 [1] NUT (11/16-16-THD)  
100. 6V-9746 [8] SEAL-O-RING  
101. 7X-7729 [9] WASHER (11X25X3-MM THK)  
102. 8T-0271 M [20] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
103. 8T-0273 M [4] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
104. 121-4405 M [4] BOLT (M4X0.7X12-MM)  
105. 8T-4121 [94] WASHER-HARD (11X21X2.5-MM THK)  
106. 8T-4133 M [10] NUT (M10X1.5-THD)  
107. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
108. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
109. 8T-4139 M [9] BOLT (M12X1.75X30-MM)  
110. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
111. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
112. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
113. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
114. 8T-4195 M [15] BOLT (M10X1.5X30-MM)  
115. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
116. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
117. 9M-7959 [4] CLAMP-HOSE  
118. 9X-2480 M [2] BOLT (M6X1X45-MM)  
120. 160-2250 G SLEEVE-ABRASION (4-IN EACH)  
121. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
122. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
123. 517-3185 I [1] HOSE AS  
124. 517-3186 I [1] HOSE AS  
125. 517-3191 I [1] HOSE AS  
126. 517-3192 I [1] HOSE AS  
127. 517-3193 I [1] HOSE AS  
128. 517-3196 I [1] HOSE AS  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00660820439
 

397-9764: LINES GP-PILOT

397-9764 LINES GP-PILOT -3-LEVER
S/N M5T1-UP
PART OF 470-7432 CONTROL & MTG GP-ELHYD
i05465978 M0066082
3979764 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 950 GC WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-8729 Y [1] VALVE GP-PILOT  
2. 397-9766 I [1] HOSE AS  
3. 397-9768 I [1] HOSE AS  
4. 397-9770 I [1] HOSE AS  
5. 397-9772 I [1] HOSE AS  
6. 397-9774 I [1] HOSE AS  
7. 397-9776 I [1] HOSE AS  
8. 397-9778 I [1] HOSE AS  
9. 397-9780 I [1] HOSE AS  
10. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
11. 7K-1181 [2] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950 GC :

KIT-PUMP
262-0347 KIT-PUMP
KICKOUT & POSITIONER GP
489-7760 KICKOUT & POSITIONER GP
397-9895 HYDRAULIC AR-3 VALVE
397-9894 HYDRAULIC AR-3 VALVE
521-7456 HYDRAULIC AR-2 VALVE
554-3399 HYDRAULIC AR
554-3398 HYDRAULIC AR
525-0144 HYDRAULIC AR
LINES GP-COUPLER
323-9292 LINES GP-COUPLER
LINES GP-COUPLER
468-0816 LINES GP-COUPLER
LINES GP-COUPLER
468-0818 LINES GP-COUPLER
LINES GP-COUPLER
530-2463 LINES GP-COUPLER
LINES GP-COUPLER
552-3776 LINES GP-COUPLER
LINES GP-FRONT
390-5914 LINES GP-FRONT
LINES GP-FRONT
551-6886 LINES GP-FRONT
LINES GP-IMPLEMENT
489-1642 LINES GP-IMPLEMENT

Truck sale:

Caterpillar 950 GC
 
Caterpillar 950 GC
- Wheel Loaders
HOLT OF CALIFORNIA
 
 
Caterpillar 950GC
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950GC
 
Caterpillar 950GC
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 950GC
 
Caterpillar 950GC
- Wheel Loaders
ALTORFER INC.
Caterpillar 950GC
 
Caterpillar 950GC
- Wheel Loaders
CARTER MACHINERY COMPANY, INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.