494-6858 HYDRAULIC AR S/N YBJ1-UP PART OF 494-6848 GENERAL AR 320D2 GC EXCAVATOR

Part No	Qty	Parts name
455-5634 Y	[1]	LINES GP-CONTROL
392-4022 Y	[1]	LINES GP-CYLINDER (BOOM)
239-1714 Y	[1]	LINES GP-FRONT
376-6321 Y	[1]	LINES GP-HYDRAULIC OIL COOLER
248-9825 Y	[1]	LINES GP-PILOT (JOYSTICK, PEDALS)
376-6309 Y	[1]	LINES GP-PILOT (MAIN CONTROL VALVE)
455-5635 Y	[1]	LINES GP-PILOT (CONTROL VALVE)
455-5636 Y	[1]	LINES GP-PILOT (FILTER, PILOT PUMP)
455-5637 Y	[1]	LINES GP-PUMP
239-1716 Y	[1]	LINES GP-TRAVEL MOTOR
260-7868 Y	[1]	MOUNTING GP-MAIN CONTROL VALVE
455-5638 Y	[1]	PUMP & MTG GP-MAIN HYDRAULIC
Y	[1]	TANK & MTG GP-HYDRAULIC
259-7464 Y	[1]	VALVE GP-MAIN CONTROL
Y		SEPARATE ILLUSTRATION

#M00688160221

234-6613: LEVER GP-CONTROL

LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N YBJ1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR

i04912170 M0068816

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	4I-3038	[2]	WASHER (3.3X8X0.5-MM THK)
3.	111-4799	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5998 D		TUBE (0.3-M)
4.	185-8286 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
5.	234-6615	[1]	KNOB
6.	087-4683	[2]	LOCKWASHER
7.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
	D		ORDER BY THE METER
	M		METRIC PART

#M00688160222

260-8010: LINES GP-BOOM

LINES GP-BOOM

260-8010 LINES GP-BOOM
S/N YBJ1-UP
PART OF 494-6845 BOOM AR-1 PIECE LONG

i04924829 M0068816

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[6]	CLIP
2.	4I-1676	[6]	CLIP
3.	7Y-4868	[8]	CLIP
4.	307-5034	[1]	TUBE AS
5.	202-3855	[1]	TUBE AS
6.	202-3856	[1]	TUBE AS
7.	202-3857	[1]	TUBE AS
8.	202-3858	[1]	TUBE AS
9.	202-6996 I	[1]	HOSE AS
10.	260-8315	[1]	TUBE AS
11.	260-8316 I	[1]	HOSE AS
12.	1P-3703	[2]	SEAL-RECTANGULAR
13.	6V-0400	[4]	FLANGE-HALF
14.	6V-9746	[9]	SEAL-O-RING
15.	8T-4139 M	[20]	BOLT (M12X1.75X30-MM)
16.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
17.	8T-4223	[28]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00688160223

373-1110: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

373-1110 LINES GP-BOOM CYLINDER -LH
S/N YBJ1-UP
PART OF 373-1106 CYLINDER & LINES GP-BOOM

i05262455 M0068816

3731110 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4648 CM	[5]	BOLT (M12X1.75X70-MM)
2.	394-6125	[1]	TUBE AS
3.	394-6126	[1]	TUBE AS
4.	394-9371	[1]	SUPPORT
5.	394-9372	[1]	SUPPORT AS
6.	399-1961 C	[1]	CLAMP
7.	1P-3703	[1]	SEAL-RECTANGULAR
8.	1P-3704	[1]	SEAL-RECTANGULAR
9.	457-5821 M	[2]	BOLT (M10X1.5X35-MM)
10.	451-2182 C	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#M00688160224

373-1115: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

373-1115 LINES GP-BOOM CYLINDER -RH
S/N YBJ1-UP
PART OF 373-1107 CYLINDER & LINES GP-BOOM

i05262459 M0068816

3731115 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4648 CM	[5]	BOLT (M12X1.75X70-MM)
2.	394-6145	[1]	TUBE AS
3.	394-6147	[1]	TUBE AS
4.	394-9371	[1]	SUPPORT
5.	394-9372	[1]	SUPPORT AS
6.	399-1961 C	[1]	CLAMP
7.	1P-3703	[1]	SEAL-RECTANGULAR
8.	1P-3704	[1]	SEAL-RECTANGULAR
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	457-5821 M	[2]	BOLT (M10X1.5X35-MM)
11.	451-2182 C	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
12.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#M00688160225

431-0455: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

431-0455 LINES GP-BUCKET CYLINDER
S/N YBJ1-UP
PART OF 494-6846 STICK AR-HOE
FOR USE WITH 2.9-M (9.5-FT) STICK

i06784008 M0068816

4310455 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8785 I	[1]	HOSE AS
2.	5I-4216 I	[1]	HOSE AS
3.	289-5690	[1]	FLANGE-SPECIAL
4.	1P-3702	[1]	SEAL-RECTANGULAR
5.	1P-3703	[2]	SEAL-RECTANGULAR
6.	6V-0400	[2]	FLANGE-HALF
7.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
8.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
10.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	8T-9403	[2]	FLANGE-HALF
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00688160226

501-8429: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

501-8429 LINES GP-BUCKET CYLINDER
S/N YBJ1-UP
PART OF 373-1109 CYLINDER & LINES GP-BUCKET

i06867941 M0068816

5018429 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	399-1962	[1]	CLAMP
2.	453-3450 M	[1]	BOLT (M12X1.75X60-MM)
3.	453-3456	[1]	WASHER-HARD (13.5X25.5X5-MM THK)
4.	457-5821 M	[2]	BOLT (M10X1.5X35-MM)
5.	501-8430	[1]	TUBE AS
6.	501-8431	[1]	SUPPORT AS
7.	501-8432	[1]	SUPPORT
8.	1P-3703	[1]	SEAL-RECTANGULAR
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
	M		METRIC PART

#M00688160227

455-5634: LINES GP-CONTROL

LINES GP-CONTROL

455-5634 LINES GP-CONTROL -REAR
S/N YBJ1-UP
PART OF 494-6858 HYDRAULIC AR

i06761650 M0068816

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-4816	[1]	SUPPORT AS
2.	196-0807	[1]	PLATE
3.	199-7394	[1]	PIPE AS
4.	199-7403 I	[1]	HOSE AS
5.	227-0581	[1]	HOSE
6.	369-8420	[1]	VALVE GP-CHECK
	2S-4078	[1]	SEAL-O-RING
	9S-6130	[1]	PLUG
	095-1547	[2]	SEAL-O-RING
	190-7826	[2]	PLUG
7.	455-5640	[1]	PIPE AS
8.	455-5641 I	[1]	HOSE AS
9.	I	[1]	HOSE AS
10.	455-5643	[1]	PIPE AS
11.	490-8940 C	[1]	SUPPORT AS
12.	096-4883 M	[2]	LOCKNUT (M10X1.5-THD)
13.	101-7402 M	[4]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
14.	144-0367	[2]	CLAMP-HOSE
15.	148-8354	[1]	ELBOW AS
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-9002	[1]	ELBOW
16.	148-8357	[1]	ELBOW AS
	5K-9090	[1]	SEAL-O-RING
	6V-9008	[1]	ELBOW
	7M-8485	[1]	SEAL-O-RING
17.	1P-3703	[4]	SEAL-RECTANGULAR
18.	4J-0524	[3]	SEAL-O-RING
19.	4J-0527	[1]	SEAL-O-RING
20.	5P-7468 C	[3]	CLIP (SLOT)
21.	5P-7469 C	[3]	CLIP (TAB)
22.	5P-8444	[1]	GROMMET (37-MM ID)
23.	6V-0400	[4]	FLANGE-HALF
24.	7X-2544 M	[4]	BOLT (M10X1.5X140-MM)
25.	7Y-5247 M	[1]	U-BOLT (M10X1.5-THD)
26.	8T-2525 C	[2]	GROMMET
27.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
29.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
30.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
31.	8T-4223 C	[15]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4956 CM	[9]	BOLT (M12X1.75X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00688160228

392-4022: LINES GP-CYLINDER

LINES GP-CYLINDER

392-4022 LINES GP-CYLINDER -BOOM
S/N YBJ1-UP
PART OF 494-6858 HYDRAULIC AR

i04917361 M0068816

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)
2.	101-7398 M	[4]	BOLT-SOCKET HEAD (M10X1.5X40-MM)
3.	108-7354 I	[1]	HOSE AS
4.	124-1047 I	[4]	HOSE AS
5.	124-1062	[1]	SUPPORT AS
6.	133-5828	[1]	SUPPORT AS
7.	142-7768	[1]	TUBE AS
8.	142-7769	[1]	TUBE AS
9.	158-9085 Y	[1]	VALVE GP-SWING CUSHION (CROSSOVER RELIEF)
10.	164-5552	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	4I-7745	[1]	CONNECTOR
	6V-8398	[1]	SEAL-O-RING
11.	234-4492	[1]	SUPPORT
12.	307-4918	[1]	CONNECTOR AS
	5K-9090	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	307-4919	[1]	CONNECTOR
13.	101-7404 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
14.	108-7550	[1]	CLIP
15.	148-8336	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
16.	148-8353	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
17.	148-8364	[1]	ELBOW AS
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
18.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
19.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
20.	1P-3703	[2]	SEAL-RECTANGULAR
21.	4I-1674	[2]	CLIP
22.	5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
23.	6V-9746	[4]	SEAL-O-RING
24.	453-3454	[8]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
26.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
27.	8T-4182 M	[8]	BOLT (M10X1.5X45-MM)
28.	461-2758 M	[2]	BOLT (M12X1.75X25-MM)
29.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
31.	8T-4910 M	[2]	BOLT (M12X1.75X60-MM)
32.	8T-9403	[4]	FLANGE-HALF
33.	6H-3615	[1]	PLUG-PROTECTION
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00688160229

239-1714: LINES GP-FRONT

LINES GP-FRONT

239-1714 LINES GP-FRONT
S/N YBJ1-UP
PART OF 494-6858 HYDRAULIC AR

i04915494 M0068816

For full view, you need register

Parts for your 320D2 GC EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-3730	[2]	FLANGE-SPECIAL
2.	101-7403 M	[2]	BOLT-SOCKET HEAD (M10X1.5X80-MM)
3.	105-3477 M	[8]	BOLT-SOCKET HEAD (M10X1.5X45-MM)
4.	105-3483 M	[2]	BOLT-SOCKET HEAD (M10X1.5X70-MM)
5.	113-6479	[2]	FLANGE-SPECIAL
6.	165-3185 I	[1]	HOSE AS
7.	165-3190 I	[1]	HOSE AS
8.	337-1182 I	[1]	HOSE AS
9.	194-0174 Y	[1]	HOSE GP-HYDRAULIC
10.	194-0180 Y	[1]	HOSE GP-HYDRAULIC
11.	214-4511 Y	[1]	FITTING GP-HYDRAULIC (4-BOLT FLANGE)
12.	236-3212 Y	[1]	HOSE GP-HYDRAULIC
13.	236-3213 Y	[1]	HOSE GP-HYDRAULIC
14.	289-5672 I	[1]	HOSE AS
15.	255-5680 Y	[1]	VALVE GP-LOAD CONTROL (STICK DRIFT RED, LINE RELIEF)
16.	255-5683 Y	[1]	VALVE GP-LOAD CONTROL (BOOM DRIFT RED, LINE RELIEF)
17.	260-7910 Y	[1]	HOSE GP-HYDRAULIC
18.	260-7988 I	[1]	HOSE AS
19.	260-7992 I	[1]	HOSE AS
20.	260-7996 I	[1]	HOSE AS
21.	260-8000 I	[1]	HOSE AS
22.	101-7397 M	[4]	BOLT-SOCKET HEAD (M12X1.75X50-MM)
23.	101-7404 M	[42]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
24.	199-1286 M	[6]	BOLT-SOCKET HEAD (M10X1.5X150-MM)
25.	1P-3702	[4]	SEAL-RECTANGULAR
26.	1P-3703	[9]	SEAL-RECTANGULAR
27.	4J-5267	[10]	SEAL-O-RING
28.	4J-5268	[1]	SEAL-O-RING
29.	5K-9090	[5]	SEAL-O-RING
30.	6V-0400	[4]	FLANGE-HALF
31.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4194 M	[4]	BOLT (M12X1.75X50-MM)
33.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	8T-9403	[4]	FLANGE-HALF
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION