366-0834 LINES GP-BOOM -STICK LOAD CONTROL VALVE S/N FEH1-UP PART OF 349-2338 VALVE AR-CHECK &amp; RELIEF 390F

366-0834 LINES GP-BOOM -STICK LOAD CONTROL VALVE
S/N FEH1-UP
PART OF 349-2338 VALVE AR-CHECK & RELIEF

i05919551 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	093-1293	[1]	CLAMP
2.	093-1294	[2]	CLAMP
3.	138-0524	[1]	PLATE
4.	179-4584	[1]	PLATE
5.	179-4595	[2]	PLATE
6.	230-0496	[1]	PLATE
7.	306-1558 I	[2]	HOSE AS
8.	331-2020	[1]	PLATE
9.	344-4496	[2]	CLIP AS
10.	370-0320	[1]	TUBE AS
11.	370-0321	[1]	TUBE AS
12.	370-0322	[1]	TUBE AS
13.	370-0324	[2]	TUBE AS
14.	370-0325 I	[1]	HOSE AS
15.	439-9069	[1]	TUBE AS
16.	136-0207	[3]	STRAP-CABLE (BLACK)
17.	153-8867	[2]	CLIP
18.	5K-9090	[3]	SEAL-O-RING
19.	6V-8397	[1]	SEAL-O-RING
20.	6V-8398	[3]	SEAL-O-RING
21.	7J-9108	[2]	SEAL-O-RING
22.	453-2839 M	[4]	BOLT (M16X2X100-MM)
23.	453-2840 M	[2]	BOLT (M16X2X140-MM)
24.	7Y-3732	[2]	CLIP
25.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
29.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4244 M	[1]	NUT (M12X1.75-THD)
31.	8T-4648 M	[1]	BOLT (M12X1.75X70-MM)
32.	8T-4910 M	[2]	BOLT (M12X1.75X60-MM)
33.	451-2175	[6]	WASHER-HARD (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240691

374-0032: LINES GP-BOOM

374-0032 LINES GP-BOOM
S/N FEH1-UP
PART OF 357-4743, 357-4755 BOOM AR

i06832846 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9F-2167	[5]	SCREW-PURGE (3/8-24X1.164-IN)
2.	138-5709	[23]	GROMMET
3.	317-4890	[3]	TUBE AS
4.	317-4891	[2]	TUBE AS
5.	333-4590	[1]	TUBE AS
6.	333-4591	[1]	TUBE AS
7.	333-4592	[1]	TUBE AS
8.	333-4593	[1]	TUBE AS
9.	333-4594	[1]	PLATE
10.	354-3803 I	[2]	HOSE AS
11.	354-3837 I	[1]	HOSE AS
12.	447-1707 CM	[42]	BOLT (M16X2X60-MM)
13.	451-2175 C	[116]	WASHER-HARD (17.5X30X3.5-MM THK)
14.	451-2183 M	[10]	NUT (M16X2-THD)
15.	453-2837 CM	[16]	BOLT (M16X2X55-MM)
16.	453-2838 M	[38]	BOLT (M16X2X70-MM)
17.	453-4135 M	[10]	BOLT (M16X2X90-MM)
18.	138-5708	[46]	CLIP-HALF
19.	1P-3705 C	[6]	SEAL-RECTANGULAR
20.	1P-3706	[4]	SEAL-RECTANGULAR
21.	5P-8077 C	[22]	FLANGE-HALF
22.	6H-3615	[5]	PLUG-PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240692

374-0033: LINES GP-BOOM

374-0033 LINES GP-BOOM -MASS
S/N FEH1-UP
PART OF 357-4756, 504-6348 BOOM AR-MASS

i05826605 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9F-2167	[5]	SCREW-PURGE (3/8-24X1.164-IN)
2.	138-5709	[18]	GROMMET
3.	317-4860	[3]	TUBE AS
4.	333-4594	[1]	PLATE
5.	333-4604	[2]	TUBE AS
6.	333-4605	[1]	TUBE AS
7.	333-4606	[1]	TUBE AS
8.	363-2291 I	[2]	HOSE AS
9.	363-2292 I	[1]	HOSE AS
10.	447-1707 M	[42]	BOLT (M16X2X60-MM)
11.	451-2175	[98]	WASHER-HARD (17.5X30X3.5-MM THK)
12.	451-2183 M	[10]	NUT (M16X2-THD)
13.	453-2837 M	[8]	BOLT (M16X2X55-MM)
14.	453-2838 M	[28]	BOLT (M16X2X70-MM)
15.	453-4135 M	[10]	BOLT (M16X2X90-MM)
16.	138-5708	[36]	CLIP-HALF
17.	1P-3705	[6]	SEAL-RECTANGULAR
18.	1P-3706	[2]	SEAL-RECTANGULAR
19.	5P-8077	[22]	FLANGE-HALF
20.	6H-3615	[5]	PLUG-PROTECTION
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240693

382-7063: LINES GP-BOOM

382-7063 LINES GP-BOOM -REACH
S/N FEH1-UP
PART OF 382-7315, 527-1951 BOOM AR-REACH

i05820029 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6H-3615	[5]	PLUG-PROTECTION
2.	9F-2167	[5]	SCREW-PURGE (3/8-24X1.164-IN)
3.	138-5708	[50]	CLIP-HALF
4.	138-5709	[25]	GROMMET
5.	317-4855	[3]	TUBE AS
6.	333-4594	[1]	PLATE
7.	354-3803 I	[2]	HOSE AS
8.	354-3837 I	[1]	HOSE AS
9.	353-0792	[1]	TUBE GP-HYDRAULIC
	1P-3706	[1]	SEAL-RECTANGULAR
	8T-4193 M	[4]	BOLT (M16X2X50-MM)
	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
10.	353-0793	[1]	TUBE GP-HYDRAULIC
	1P-3706	[1]	SEAL-RECTANGULAR
	8T-4193 M	[4]	BOLT (M16X2X50-MM)
	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
11.	353-0794	[3]	TUBE AS
12.	353-0795	[2]	TUBE GP-HYDRAULIC
			(EACH INCLUDES)
	1P-3706	[1]	SEAL-RECTANGULAR
	8T-4193 M	[4]	BOLT (M16X2X50-MM)
	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
13.	353-0796	[1]	TUBE AS
14.	353-0797	[1]	TUBE AS
15.	453-4135 M	[10]	BOLT (M16X2X90-MM)
16.	1P-3705	[6]	SEAL-RECTANGULAR
17.	1P-3706	[7]	SEAL-RECTANGULAR
19.	5P-8077	[22]	FLANGE-HALF
20.	453-2838 M	[42]	BOLT (M16X2X70-MM)
21.	451-2183 M	[10]	NUT (M16X2-THD)
22.	447-1707 M	[42]	BOLT (M16X2X60-MM)
23.	453-2837 M	[28]	BOLT (M16X2X55-MM)
24.	451-2175	[132]	WASHER-HARD (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240694

382-7075: LINES GP-BOOM

382-7075 LINES GP-BOOM -MASS BOOM, STICK LOAD CONTROL
S/N FEH1-UP
PART OF 349-2348 VALVE AR-CHECK & RELIEF

i05918722 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	093-1293	[1]	CLAMP
2.	138-0524	[1]	PLATE
3.	179-4584	[1]	PLATE
4.	179-4595	[2]	PLATE
5.	392-6654 I	[2]	HOSE AS
6.	392-6656 I	[1]	HOSE AS
7.	392-6662	[1]	TUBE AS
8.	419-6557	[1]	PLATE AS
9.	439-9067	[1]	TUBE AS
10.	439-9068	[1]	TUBE AS
11.	136-0207	[3]	STRAP-CABLE (BLACK)
12.	153-8867	[4]	CLIP
13.	5K-9090	[2]	SEAL-O-RING
14.	6V-8397	[1]	SEAL-O-RING
15.	6V-8398	[3]	SEAL-O-RING
16.	453-2839 M	[2]	BOLT (M16X2X100-MM)
17.	453-2841 M	[2]	BOLT (M16X2X150-MM)
18.	7Y-3732	[1]	CLIP
19.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
20.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
21.	8T-4244 M	[1]	NUT (M12X1.75-THD)
22.	8T-4648 M	[1]	BOLT (M12X1.75X70-MM)
23.	8T-4910 M	[2]	BOLT (M12X1.75X60-MM)
24.	451-2175	[4]	WASHER-HARD (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240695

353-9651: LINES GP-BOOM CYLINDER

353-9651 LINES GP-BOOM CYLINDER -LH
S/N FEH1-UP
PART OF 384-1157, 475-2026 CYLINDER & LINES GP-BOOM

i05819638 M0072724

3539651 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	173-4793	[2]	BLOCK
2.	363-2441	[1]	SUPPORT AS
3.	361-8887	[1]	SUPPORT AS
4.	356-9235	[1]	TUBE AS
5.	356-9236	[1]	TUBE AS
6.	1P-3705	[4]	SEAL-RECTANGULAR
7.	453-3454	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	457-5821 M	[4]	BOLT (M10X1.5X35-MM)
9.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
11.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
12.	8T-6868 M	[8]	BOLT (M12X1.75X80-MM)
	M		METRIC PART

#M00727240696

353-9652: LINES GP-BOOM CYLINDER

353-9652 LINES GP-BOOM CYLINDER -RH
S/N FEH1-UP
PART OF 384-1136, 475-2027 CYLINDER & LINES GP-BOOM

i05819630 M0072724

3539652 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	173-4793	[2]	BLOCK
2.	363-2441	[1]	SUPPORT AS
3.	361-8887	[1]	SUPPORT AS
4.	356-9237	[1]	TUBE AS
5.	356-9238	[1]	TUBE AS
6.	1P-3705	[4]	SEAL-RECTANGULAR
7.	453-3454	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	457-5821 M	[4]	BOLT (M10X1.5X35-MM)
9.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
11.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
12.	8T-6868 M	[8]	BOLT (M12X1.75X80-MM)
	M		METRIC PART

#M00727240697

382-7047: LINES GP-BOOM CYLINDER

382-7047 LINES GP-BOOM CYLINDER
S/N FEH1-UP
PART OF 477-0635 HYDRAULIC AR

i05813802 M0072724

3827047 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6H-3615	[2]	PLUG-PROTECTION
2.	1P-3704	[8]	SEAL-RECTANGULAR
3.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
4.	369-5371 I	[4]	HOSE AS
5.	369-5378	[1]	SUPPORT
6.	369-5379	[1]	SUPPORT
7.	369-5380	[1]	SUPPORT AS
8.	369-5383	[1]	SUPPORT AS
9.	385-3005	[1]	TUBE AS
10.	385-3008	[1]	TUBE AS
11.	397-5594 I	[2]	HOSE AS
12.	369-6859	[1]	PLUG AS
	2S-4078	[1]	SEAL-O-RING
	360-3698	[1]	PLUG
13.	162-9523	[2]	GROMMET
14.	1P-3705	[4]	SEAL-RECTANGULAR
15.	1P-5767	[16]	FLANGE-HALF
16.	5P-8077	[8]	FLANGE-HALF
17.	6V-1572	[2]	CLIP (SLOT)
18.	6V-1573	[2]	CLIP (TAB)
19.	453-1259 M	[6]	BOLT (M16X2X40-MM)
20.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
22.	447-1707 M	[16]	BOLT (M16X2X60-MM)
23.	8T-4183 M	[6]	BOLT (M12X1.75X40-MM)
24.	8T-4194 M	[32]	BOLT (M12X1.75X50-MM)
25.	8T-4223	[50]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-4956 M	[12]	BOLT (M12X1.75X35-MM)
27.	451-2175	[22]	WASHER-HARD (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#M00727240698

382-7064: LINES GP-BOOM CYLINDER

382-7064 LINES GP-BOOM CYLINDER -BOOM LOAD CONTROL, LH
S/N FEH1-UP
PART OF 384-1158 CYLINDER & LINES AR-BOOM, 475-2028 CYLINDER & LINES GP-BOOM

i05918700 M0072724

3827064 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	109-3656	[1]	ELBOW
2.	173-4793	[1]	BLOCK
3.	260-8285	[1]	BLOCK
4.	356-9236	[1]	TUBE AS
5.	358-7374	[1]	TUBE AS
6.	361-8887	[2]	SUPPORT AS
7.	363-2354	[1]	SUPPORT AS
8.	363-2441	[1]	SUPPORT AS
9.	399-8414 Y	[1]	VALVE GP-CHECK & RELIEF (BOOM LOWERING CONTROL VALVE)
10.	108-3819 M	[4]	BOLT-SOCKET HEAD (M12X1.75X70-MM)
11.	148-8327	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
12.	148-8336	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
13.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
14.	1P-3705	[5]	SEAL-RECTANGULAR
15.	3K-0360	[1]	SEAL-O-RING
16.	6V-8397	[1]	SEAL-O-RING
17.	453-3454	[8]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
19.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
20.	457-5821 M	[8]	BOLT (M10X1.5X35-MM)
21.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
23.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
24.	8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00727240699

382-7065: LINES GP-BOOM CYLINDER

382-7065 LINES GP-BOOM CYLINDER -BOOM LOAD CONTROL, RH
S/N FEH1-UP
PART OF 384-1159 CYLINDER & LINES AR-BOOM, 475-2029 CYLINDER & LINES GP-BOOM

i05918701 M0072724

3827065 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR: