HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
FILTER GP
FITTING GP
HYDRAULIC SYSTEM
CYLINDER GP#M00739260400
224-9320: CYLINDER GP-STABILIZER
224-9320 CYLINDER GP-STABILIZER
S/N FB61-UP
110MM (4.3 IN) BORE X 492MM (19.4 IN) STROKE
PART OF 453-7566, 471-7741 STABILIZER AR
AN ATTACHMENT
S/N FB61-UP
110MM (4.3 IN) BORE X 492MM (19.4 IN) STROKE
PART OF 453-7566, 471-7741 STABILIZER AR
AN ATTACHMENT
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 226-3298 | [1] | CYLINDER AS | |
2. | 200-0917 | [1] | ROD | |
3. | 125-9693 | [1] | PISTON | |
4. | 125-9694 | [1] | COLLAR | |
5. | 221-3539 | [1] | PISTON | |
6. | 118-3116 | [2] | RETAINER | |
7. | 118-3117 | [2] | CONE | |
8. | 5W-1274 | [2] | PLUG | |
9. | 225-8698 J | [1] | SEAL | |
10. | 118-2716 J | [1] | RING | |
11. | 118-2717 J | [2] | RING | |
12. | 112-6920 J | [1] | SEAL-O-RING | |
13. | 125-9695 J | [1] | RING-BACKUP | |
14. | 125-9701 J | [1] | SEAL-O-RING | |
15. | 125-9696 J | [1] | RING | |
16. | 125-9697 J | [1] | SEAL-O-RING | |
17. | 125-9698 J | [1] | RING-BACKUP | |
18. | 125-9699 J | [1] | RING | |
19. | 5W-6388 J | [1] | SEAL-O-RING | |
20. | 118-2727 J | [1] | RING-BACKUP | |
21. | 4J-5351 J | [3] | SEAL-O-RING | |
22. | 118-3130 J | [2] | RING-BACKUP | |
23. | 118-3131 J | [2] | SEAL-O-RING | |
24. | 221-3541 J | [2] | RING-BACKUP | |
25. | 118-3132 | [2] | SPRING | |
26. | 118-2730 M | [1] | NUT (M52X1.5-THD, LH) | |
27. | 118-2731 | [1] | PIN | |
28. | 8G-4189 | [2] | BEARING-SELF-ALIGNING | |
29. | 8T-0707 | [4] | RING-RETAINING (INTERNAL) | |
30. | 118-2732 | [1] | FITTING-GREASE | |
AVAILABLE REPAIR KIT(S): | ||||
226-3299 J | [1] | KIT-SEAL (STABILIZER CYLINDER) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#M00739260401
375-1285: CYLINDER GP-STEERING
375-1285 CYLINDER GP-STEERING
S/N FB61-UP
PART OF 331-1380 AXLE GP-STEERING
AN ATTACHMENT
S/N FB61-UP
PART OF 331-1380 AXLE GP-STEERING
AN ATTACHMENT
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 243-0920 | [1] | ROD AS | |
2. | 375-1289 | [1] | GUIDE | |
3. | 387-2949 | [1] | RING-RETAINING | |
4. | 243-0923 | [1] | RING-SNAP | |
5. | 243-0925 | [1] | RING-RETAINING | |
6. | 243-0926 | [1] | FLANGE | |
PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
AVAILABLE REPAIR KIT(S): | ||||
375-1287 | [1] | KIT-SEAL & RING (STEERING CYLINDER) | ||
(INCLUDES PISTON RING, RING SEALS, O-RING SELAS, WIPER RING, ROD SEAL & PARTS MARKED J IN THE GRAPHIC) |
#M00739260402
368-3252: CYLINDER GP-STICK
368-3252 CYLINDER GP-STICK
S/N FB61-UP
120-MM (4.7-IN) BORE X 1147-MM (45.2-IN) STROKE
PART OF 368-3228 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
S/N FB61-UP
120-MM (4.7-IN) BORE X 1147-MM (45.2-IN) STROKE
PART OF 368-3228 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 165-9285 J | [1] | SEAL-LIP TYPE | |
2. | 374-5141 | [1] | HEAD | |
3. | 374-5142 | [1] | PISTON | |
4. | 340-8345 | [1] | STOP | |
5. | 5I-3046 | [1] | STOP | |
6. | 368-3276 | [1] | CYLINDER AS-STICK | |
6A. | 7Y-5131 | [1] | BUSHING | |
7. | 368-6825 | [1] | ROD & BEARING AS-CYLINDER | |
7A. | 7Y-5131 | [1] | BUSHING | |
8. | 7Y-5216 M | [8] | BOLT-SOCKET HEAD (M20X2.5X80-MM) | |
9. | 096-8139 | [1] | RING-RETAINING | |
10. | 103-8441 | [1] | RING-RETAINING | |
11. | 103-8442 | [1] | RING | |
12. | 114-0755 | [1] | BUSHING | |
13. | 123-7724 J | [1] | SEAL-O-RING | |
14. | 158-9063 J | [2] | RING | |
15. | 170-9843 J | [1] | SEAL-BUFFER | |
16. | 179-9674 J | [1] | RING | |
17. | 326-4417 M | [1] | LOCKNUT (M60X2-THD) | |
18. | 170-9859 J | [1] | SEAL-U-CUP | |
19. | 185-9050 J | [1] | RING-SEAL | |
20. | 367-4978 | [1] | RING-BACKUP | |
21. | 096-1054 J | [1] | RING-BACKUP | |
22. | 8T-4241 | [2] | RING-RETAINING | |
23. | 9X-3592 J | [1] | SEAL AS | |
AVAILABLE REPAIR KIT(S): | ||||
260-5316 J | [1] | KIT-SEAL (STICK CYLINDER) | ||
(ALSO INCLUDES BACKUP RING) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#M00739260403
430-9488: DRIVE & MTG GP-PUMP
430-9488 DRIVE & MTG GP-PUMP
S/N FB61-UP
PART OF 423-2542, 505-5268 PUMP GP-PISTON
S/N FB61-UP
PART OF 423-2542, 505-5268 PUMP GP-PISTON
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SIS#M00739260404
438-5833: DRIVE & MTG GP-SWING
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SIS#M00739260405
152-7375: DRIVE GP-SWING
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 155-0821 | [1] | SHAFT | |
2. | 155-0822 | [3] | GEAR-PLANETARY | |
3. | 155-0823 | [1] | CARRIER | |
4. | 155-0824 | [3] | PIN | |
5. | 082-3084 | [6] | WASHER | |
6. | 082-3085 | [6] | WASHER | |
7. | 132-4292 | [63] | BEARING AS-NEEDLE | |
8. | 095-0919 | [3] | RING-RETAINING | |
9. | 155-0827 | [1] | HOUSING AS-SWING | |
10. | 155-0828 | [1] | SEAL-LIP TYPE | |
11. | 155-0829 | [1] | SEAL | |
12. | 155-0830 | [1] | PINION | |
13. | 155-0831 | [1] | WASHER-SPECIAL | |
14. | 155-0832 | [1] | BEARING AS-ROLLER | |
15. | 155-0833 | [1] | BEARING AS-ROLLER | |
16. | 155-0835 | [2] | NUT-SLOTTED | |
17. | 155-0834 | [1] | RING | |
19. | 155-0836 | [1] | CARRIER-PLANETARY | |
20. | 155-0837 | [4] | GEAR-PLANETARY | |
21. | 155-0838 | [4] | BEARING AS-ROLLER | |
22. | 1H-8647 | [4] | RING-SNAP | |
23. | 098-2981 | [3] | SHIM (2-MM THK) | |
24. | 110-4737 | [1] | RING-RETAINING | |
25. | 121-8088 | [2] | BALL BEARING | |
26. | 155-0839 | [1] | GEAR-SUN | |
27. | 179-3153 | [2] | SHIM (2.5-MM THK) | |
28. | 6V-5201 | [2] | RING-RETAINING | |
29. | 155-0848 | [1] | HOUSING-BRAKE | |
30. | 155-0849 | [1] | ORIFICE | |
31. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
32. | 201-7396 | [1] | SEAL-O-RING | |
33. | 155-0850 | [1] | PISTON | |
34. | 155-0851 | [1] | SEAL-LIP TYPE | |
35. | 155-0852 | [1] | SEAL-LIP TYPE | |
36. | 179-3151 | [1] | SPRING | |
37. | 179-3154 | [1] | SHIM (3.5-MM THK) | |
38. | 132-4268 | [4] | DISC-CLUTCH (1.7-MM THK) | |
39. | 132-4262 B | [5] | DISC-CLUTCH (1.4-MM THK) | |
40. | 132-4263 B | [1] | DISC-CLUTCH (1.2-MM THK) | |
41. | 132-4265 B | [1] | DISC-CLUTCH (1.6-MM THK) | |
42. | 132-4266 B | [1] | DISC-CLUTCH (1.8-MM THK) | |
43. | 9X-6574 | [1] | RING-RETAINING | |
44. | 155-0855 | [1] | SLEEVE | |
45. | 8T-0707 | [1] | RING-RETAINING (INTERNAL) | |
46. | 179-3560 | [1] | SEAL-O-RING | |
B | USE AS REQUIRED | |||
M | METRIC PART |
#M00739260406
432-5884: FILTER & MTG GP-OIL
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 431-5653 | [1] | BRACKET | |
2. | 432-6054 | [1] | FILTER GP-OIL | |
442-0109 | [1] | ELEMENT AS | ||
442-0110 | [1] | HOUSING GP-FILTER | ||
442-0111 | [1] | BASE-OIL FILTER | ||
3. | 148-8354 | [1] | ELBOW AS | |
3K-0360 | [1] | SEAL-O-RING | ||
6V-8398 | [1] | SEAL-O-RING | ||
6V-9002 | [1] | ELBOW | ||
4. | 155-3504 | [1] | ELBOW AS | |
2M-9780 | [1] | SEAL-O-RING | ||
6V-9003 | [1] | ELBOW | ||
7J-9108 | [1] | SEAL-O-RING | ||
5. | 8T-4189 M | [5] | BOLT (M8X1.25X20-MM) | |
6. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART |
#M00739260407
432-6030: FILTER GP-OIL
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SIS#M00739260408
176-6765: FITTING GP-HYDRAULIC
176-6765 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N FB61-UP
FOR USE WITH DITCH CLEANING BUCKET MEDIUM PRESSURE FUNCTION
AN ATTACHMENT
S/N FB61-UP
FOR USE WITH DITCH CLEANING BUCKET MEDIUM PRESSURE FUNCTION
AN ATTACHMENT
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SIS#M00739260409
392-2932: FITTING GP-HYDRAULIC
392-2932 FITTING GP-HYDRAULIC -GRAPPLE ROTATE
S/N FB61-UP
PART OF 503-2175, 503-2176, 503-2177 STICK AR-HOE
AN ATTACHMENT
S/N FB61-UP
PART OF 503-2175, 503-2176, 503-2177 STICK AR-HOE
AN ATTACHMENT
Parts for your M316F WHEELED EXCAVATOR:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Stabilizer Cylinder Group may Fail on Certain Mobile Hydraulic Power Units, and Wheeled Excavators {5468}
Stabilizer Cylinder Group may Fail on Certain Mobile Hydraulic Power Units, and Wheeled Excavators {5468}
Stabilizer Cylinder Group may Fail on Certain Mobile Hydraulic Power Units, and Wheeled Excavators {5468}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Testing and Adjusting
Disassembly and Assembly
Boom Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Bucket Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Stick Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Stabilizer Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Steering Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Fore Boom Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Stub Boom Cylinders - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Blade Cylinder - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}