AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-7935 DOOR GP-ACCESS -RH S/N MB51-257; JML1-353; NDY1-267 PART OF 387-7931 ENCLOSURE GP-ENGINE AN ATTACHMENT D6T


FRAME AND BODY
DOOR GP
DRAWBAR GP
ENCLOSURE GP

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR JML
 D6T XL, XW, LGP Track-Type Tractor JML00001-UP (MACHINE) POWERED BY C9.3 Engine M0074211 D6T JML   (2017)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
381-6411 DOOR GP-ACCESS
DOOR GP-ACCESS
381-6413 DOOR GP-ACCESS
DOOR GP-ACCESS
387-7935 DOOR GP-ACCESS
DOOR GP-ACCESS
387-7938 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3288 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3289 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3294 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3295 DOOR GP-ACCESS
 

#M00742110510
 

387-7935: DOOR GP-ACCESS

387-7935 DOOR GP-ACCESS -RH
S/N MB51-257; JML1-353; NDY1-267
PART OF 387-7931 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i05758395 M0074211
3877935 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 356-1008 [1] PLATE-SPACER  
3. 378-9488 [1] GUIDE  
4. 387-7936 [1] DOOR AS-ACCESS (RH)  
5. 451-9110 [1] PLATE-SPACER  
6. 3W-9208 [1] PAWL  
7. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
10. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
13. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
14. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
15. 274-3403 [1] PIN  
16. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
  M   METRIC PART
 

#M00742110511
 

387-7938: DOOR GP-ACCESS

387-7938 DOOR GP-ACCESS -LH
S/N MB51-257; JML1-353; NDY1-267
PART OF 387-7931 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i05758396 M0074211
3877938 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 356-1008 [1] PLATE-SPACER  
3. 378-9488 [1] GUIDE  
4. 387-7939 [1] DOOR AS-ACCESS (LH)  
5. 451-9110 [1] PLATE-SPACER  
6. 3W-9208 [1] PAWL  
7. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
10. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
13. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
14. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
15. 274-3403 [1] PIN  
16. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
  M   METRIC PART
 

#M00742110512
 

516-3288: DOOR GP-ACCESS

516-3288 DOOR GP-ACCESS -LH
S/N MB5258-UP; JML354-UP; NDY268-UP
PART OF 381-6440 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i07150984 M0074211
5163288 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
3. 274-3403 [1] PIN  
4. 356-1008 [1] PLATE-SPACER  
5. 378-9488 [1] GUIDE  
6. 451-9110 [1] PLATE-SPACER  
7. 516-3283 [1] PAWL  
8. 516-3286 [1] DOOR AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
9. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
12. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
17. 5P-7483 D SEAL (1-M)  
17A. 5P-7483 D SEAL (0.9-M)  
18. 3E-8082 E SEAL (86-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00742110513
 

516-3289: DOOR GP-ACCESS

516-3289 DOOR GP-ACCESS -RH
S/N MB5258-UP; JML354-UP; NDY268-UP
PART OF 381-6440 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i07150993 M0074211
5163289 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
3. 274-3403 [1] PIN  
4. 356-1008 [1] PLATE-SPACER  
5. 378-9488 [1] GUIDE  
6. 451-9110 [1] PLATE-SPACER  
7. 516-3283 [1] PAWL  
8. 516-3287 [1] DOOR AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
9. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
12. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
17. 5P-7483 D SEAL (1-M)  
17A. 5P-7483 D SEAL (0.9-M)  
18. 3E-8082 E SEAL (86-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00742110514
 

516-3294: DOOR GP-ACCESS

516-3294 DOOR GP-ACCESS -LH
S/N MB5258-UP; JML354-UP; NDY268-UP
PART OF 387-7931 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i07150931 M0074211
5163294 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
3. 274-3403 [1] PIN  
4. 356-1008 [1] PLATE-SPACER  
5. 378-9488 [1] GUIDE  
6. 451-9110 [1] PLATE-SPACER  
7. 516-3283 [1] PAWL  
8. 516-3292 [1] DOOR AS-ACCESS (LH)  
9. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
12. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
17. 5P-7483 D SEAL (1-M)  
17A. 5P-7483 D SEAL (0.9-M)  
18. 3E-8082 E SEAL (86-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00742110515
 

516-3295: DOOR GP-ACCESS

516-3295 DOOR GP-ACCESS -RH
S/N MB5258-UP; JML354-UP; NDY268-UP
PART OF 387-7931 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i07150923 M0074211
5163295 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4000 [1] LATCH AS (T-BAR, COMPARTMENT)  
2. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
3. 274-3403 [1] PIN  
4. 356-1008 [1] PLATE-SPACER  
5. 378-9488 [1] GUIDE  
6. 451-9110 [1] PLATE-SPACER  
7. 516-3283 [1] PAWL  
8. 516-3293 [1] DOOR AS-ACCESS  
9. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
12. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 8T-9496 [2] LOCKNUT (9/16-18-THD)  
17. 5P-7483 D SEAL (1-M)  
17A. 5P-7483 D SEAL (0.9-M)  
18. 3E-8082 E SEAL (86-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00742110516
 

3W-6866: DRAWBAR GP

3W-6866 DRAWBAR GP
S/N MB51-UP; JML1-UP; NDY1-UP
FOR USE WITH @@@@@ 1Q-4324@@@@@
CANNOT BE USED WITH RIPPER AR, WINCH AR, STRIKER GP-REAR
AN ATTACHMENT
i00366403 M0074211
3W6866 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6867 [1] DRAWBAR AS  
2. 7B-0863 [1] LATCH-PIN  
3. 7F-9547 [1] PIN AS-DRAWBAR  
  7F-9543 [1] COLLAR  
4. 7X-7644 [1] FILM-IDENTIFICATION (TIE-DOWN)  
5. 356-2197 [1] FILM-INFORMATION (DRAWBAR, READ OMM)  
6. 9M-5854 [10] STUD-TAPERLOCK (1-8-THD)  
7. 299-3423 [10] NUT (1-8-THD)  
8. 8T-4140 M [1] BOLT (M16X2X60-MM)  
9. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
10. 299-3426 [10] WASHER-HARD (28X49X6-MM THK)  
11. 7X-1456 [16] PLUG  
  M   METRIC PART
 

#M00742110517
 

7G-8975: DRAWBAR GP

7G-8975 DRAWBAR GP
S/N MB51-UP; NDY1-UP
CANNOT BE USED WITH RIPPER AR, WINCH AR, STRIKER GP-REAR
AN ATTACHMENT
i00401871 M0074211
7G8975 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-2182 [1] DRAWBAR AS  
  1P-1547 [1] PLATE-LOCK  
2. 7B-0863 [1] LATCH-PIN  
3. 7F-9547 [1] PIN AS-DRAWBAR  
  7F-9543 [1] COLLAR  
4. 7X-7644 [1] FILM-IDENTIFICATION (TIE-DOWN)  
5. 356-2197 [1] FILM-INFORMATION (DRAWBAR, READ OMM)  
6. 9M-5854 [10] STUD-TAPERLOCK (1-8-THD)  
7. 299-3423 [10] NUT (1-8-THD)  
8. 8T-4140 M [1] BOLT (M16X2X60-MM)  
9. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
10. 299-3426 [10] WASHER-HARD (28X49X6-MM THK)  
11. 7X-1456 [16] PLUG  
  M   METRIC PART
 

#M00742110518
 

388-2147: ENCLOSURE GP

388-2147 ENCLOSURE GP
S/N MB51-UP; JML1-UP; NDY1-UP
PART OF 457-7580 CHASSIS AR
AN ATTACHMENT
i05732879 M0074211
3882147 ENCLOSURE GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 333-4794 [1] PLATE  
2. 333-4795 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
3. 392-5552 [1] BRACKET AS  
4. 452-1522 [1] COVER AS  
5. 7X-7729 [8] WASHER (11X25X3-MM THK)  
6. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
8. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
  M   METRIC PART
 

#M00742110519
 

381-6440: ENCLOSURE GP-ENGINE

381-6440 ENCLOSURE GP-ENGINE
S/N MB51-257; JML1-353; NDY1-267
PART OF 474-5752 FORESTRY AR, 497-7892 OPTION AR-REGIONAL
AN ATTACHMENT
i07017876 M0074211
3816440 ENCLOSURE GP-ENGINE Parts scheme 3816440 ENCLOSURE GP-ENGINE Parts scheme 3816440 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-3819 [2] PLATE  
2. 6T-9927 [2] SLIDE  
3. 8E-4832 [2] STRIKER  
4. 9P-3066 [2] MOUNTING  
5. 329-1839 [2] HANDHOLD  
6. 329-1871 [4] BOSS  
7. 356-1032 [2] HINGE AS (RH)  
8. 356-1033 [2] HINGE AS (LH)  
9. 376-7610 [2] LOCKPIN  
10. 378-9156 [1] ADAPTER AS  
11. 378-9160 [1] BAFFLE AS (RH)  
12. 378-9161 [1] BAFFLE AS (LH)  
13. 378-9500 [2] ROD AS  
14. 381-6411 Y [1] DOOR GP-ACCESS (LH)  
15. 381-6413 Y [1] DOOR GP-ACCESS (RH)  
16. 381-6433 [1] COVER  
17. 381-6434 [1] PLATE AS  
18. 381-6435 [1] PLATE AS  
19. 394-2717 [1] BRACKET AS (RH)  
20. 394-2718 [1] BRACKET AS (LH)  
21. 451-9105 Y [1] HOOD & GUARD GP  
22. 451-9109 [1] COVER  
23. 499-2990 CY [1] ENCLOSURE GP-ENGINE  
24. 512-7382 C [1] PANEL GP-SOUND SUPPRESSION (LH)  
  7X-0586 [3] WASHER-HARD (7.2X32X2-MM THK)  
  8T-4171 M [3] BOLT (M6X1X12-MM)  
  381-6427 [1] PANEL AS (LH)  
  386-5244 [1] LINER  
25. 512-7383 C [1] PANEL GP-SOUND SUPPRESSION (RH)  
  7X-0586 [3] WASHER-HARD (7.2X32X2-MM THK)  
  8T-4171 M [3] BOLT (M6X1X12-MM)  
  381-6430 [1] PANEL AS (RH)  
  386-5245 [1] LINER  
26. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
27. 109-5637 B [4] TUBE  
28. 4M-7470 [2] GROMMET  
29. 5P-4116 [10] WASHER-HARD (8.8X20.5X2-MM THK)  
30. 6P-8269 [1] WASHER (20.5X88X6-MM THK)  
31. 7X-7729 [42] WASHER (11X25X3-MM THK)  
32. 8D-6542 [4] GROMMET  
33. 8G-4014 [2] RETAINER  
34. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 CM [6] BOLT (M10X1.5X25-MM)  
36. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
37. 8T-4175 M [1] BOLT (M16X2X90-MM)  
38. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
39. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
40. 8T-4195 CM [38] BOLT (M10X1.5X30-MM)  
41. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
43. 5P-7483 D SEAL (0.9-M EACH)  
43A. 5P-7483 D SEAL (1.0-M EACH)  
44. 3E-8082 E SEAL (86-CM EACH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6T :

DOOR GP-ACCESS
381-6413 DOOR GP-ACCESS
DOOR GP-ACCESS
381-6411 DOOR GP-ACCESS
COUNTERWEIGHT GP
238-1177 COUNTERWEIGHT GP
COUNTERWEIGHT GP
1Q-4324 COUNTERWEIGHT GP
COUNTERWEIGHT GP
117-9058 COUNTERWEIGHT GP
CASE & FRAME GP
532-7046 CASE & FRAME GP
CASE & FRAME GP
463-9432 CASE & FRAME GP
CASE & FRAME AS
431-6566 CASE & FRAME AS
DOOR GP-ACCESS
387-7938 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3288 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3289 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3294 DOOR GP-ACCESS
DOOR GP-ACCESS
516-3295 DOOR GP-ACCESS
DRAWBAR GP
3W-6866 DRAWBAR GP
DRAWBAR GP
7G-8975 DRAWBAR GP
ENCLOSURE GP
388-2147 ENCLOSURE GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.