IMPLEMENTS
BULLDOZER GPLINES GP-GREASE
BULLDOZER GP
IMPLEMENTS
BULLDOZER GP
#M00742110860
481-4918: INSTALLATION AR-BULLDOZER
481-4918 INSTALLATION AR-BULLDOZER -HEAVY-DUTY
S/N NDY1-UP
ANGLING
AN ATTACHMENT
S/N NDY1-UP
ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2. | 6Y-6751 | [1] | PIN | |
| 3. | 8T-7371 | [1] | PLATE-SERIAL NUMBER | |
| 4. | 109-1352 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 251-9814 Y | [1] | BRACE GP-BULLDOZER (HYDRAULIC TILT) | |
| 6. | 251-9827 | [4] | TRUNNION | |
| 7. | 251-9829 | [1] | RETAINER | |
| 8. | 442-8006 Y | [1] | C-FRAME GP | |
| 9. | 442-8011 Y | [1] | LINES GP-TILT CYLINDER | |
| 10. | 509-7673 CY | [1] | WIRING GP-GRADE CONTROL | |
| 11. | 7X-2553 M | [1] | BOLT (M16X2X40-MM) | |
| 12. | 7X-2563 M | [16] | BOLT (M20X2.5X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110861
481-4919: INSTALLATION AR-BULLDOZER
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2. | 4Z-9412 Y | [1] | TRUNNION GP-BULLDOZER | |
| 3. | 6Y-6751 | [1] | PIN | |
| 4. | 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 5. | 251-9827 | [4] | TRUNNION | |
| 6. | 251-9829 | [1] | RETAINER | |
| 7. | 358-0111 Y | [1] | BRACE GP-BULLDOZER | |
| 8. | 442-8008 Y | [1] | C-FRAME GP | |
| 9. | 442-8014 Y | [1] | LINES GP-TILT CYLINDER | |
| 10. | 509-7673 CY | [1] | WIRING GP-GRADE CONTROL | |
| 11. | 7X-2553 M | [1] | BOLT (M16X2X40-MM) | |
| 12. | 7X-2563 M | [16] | BOLT (M20X2.5X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110862
481-4920: INSTALLATION AR-BULLDOZER
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 2. | 6Y-6751 | [1] | PIN | |
| 3. | 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 4. | 109-1353 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 251-9827 | [4] | TRUNNION | |
| 6. | 251-9829 | [1] | RETAINER | |
| 7. | 334-1783 Y | [1] | C-FRAME GP | |
| 8. | 348-6701 Y | [1] | BRACE GP-BULLDOZER | |
| 9. | 387-8374 Y | [1] | LINES GP-TILT CYLINDER | |
| 10. | 509-7674 CY | [1] | WIRING GP-GRADE CONTROL | |
| 11. | 7X-2553 M | [1] | BOLT (M16X2X40-MM) | |
| 12. | 7X-2563 M | [16] | BOLT (M20X2.5X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110863
382-4149: LINES GP-GREASE
382-4149 LINES GP-GREASE
S/N MB51-UP; JML1-UP; NDY1-UP
PART OF 382-4250 LINES GP-GREASE
AN ATTACHMENT
S/N MB51-UP; JML1-UP; NDY1-UP
PART OF 382-4250 LINES GP-GREASE
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 8C-6915 | [1] | ADAPTER-BULKHEAD | |
| 3. | 382-4154 | [1] | PLATE | |
| 4. | 488-9160 CI | [1] | HOSE AS | |
| 5. | 124-0174 C | [2] | CLIP (LOOP) | |
| 6. | 148-8316 | [1] | CONNECTOR AS | |
| 6V-8647 | [1] | CONNECTOR | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 7. | 310-7300 | [1] | CLIP | |
| 9. | 6V-8397 | [1] | SEAL-O-RING | |
| 10. | 6V-9168 | [1] | NUT (11/16-16-THD) | |
| 11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 16. | 8X-5379 | [1] | SPACER (12.52X17.14X40-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#M00742110864
382-4250: LINES GP-GREASE
382-4250 LINES GP-GREASE
S/N MB51-UP; JML1-UP; NDY1-UP
PART OF 492-0880, 492-0881 DISTRIBUTION AR, 492-0879 MERCHANDISE AR
CANNOT BE USED WITH OIL CHANGE GP-HIGH SPEED
AN ATTACHMENT
S/N MB51-UP; JML1-UP; NDY1-UP
PART OF 492-0880, 492-0881 DISTRIBUTION AR, 492-0879 MERCHANDISE AR
CANNOT BE USED WITH OIL CHANGE GP-HIGH SPEED
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00742110865
387-8316: PUSH ARM GP
387-8316 PUSH ARM GP -SEMI-UNIVERSAL
S/N NDY1-211
PART OF 481-4907, 481-4908 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N NDY1-211
PART OF 481-4907, 481-4908 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1481 | [1] | LINK AS | |
| 2. | 4T-1520 | [1] | CAGE AS | |
| 3. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 8E-5703 B | [78] | SHIM (0.8-MM THK) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| (EACH INCLUDES) | ||||
| 8E-5703 B | [14] | SHIM (0.8-MM THK) | ||
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| (EACH INCLUDES) | ||||
| 4T-4866 | [14] | SHIM (0.8-MM THK) | ||
| 8. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 9. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 10. | 282-9090 | [2] | RETAINER | |
| 11. | 290-8226 | [2] | PIN | |
| 12. | 334-1751 | [1] | PUSH ARM AS (LH) | |
| 12A. | 179-6152 | [1] | BEARING | |
| 12B. | 4T-0780 | [1] | TRUNNION | |
| 12C. | 8P-9770 | [1] | PLATE | |
| 12D. | 124-9666 | [1] | BRACKET | |
| 12E. | 179-6153 | [1] | BEARING | |
| 13. | 334-1752 | [1] | PUSH ARM AS (RH) | |
| 13A. | 179-6152 | BEARING | ||
| 13B. | 4T-0732 | BRACKET | ||
| 13C. | 8P-9770 | [1] | PLATE | |
| 13D. | 9W-2579 | [1] | PLATE | |
| 13E. | 179-6153 | BEARING | ||
| 14. | 367-9478 Y | [1] | CYLINDER GP-TILT | |
| 15. | 387-8337 | [2] | PLATE | |
| 16. | 3B-4632 | [2] | PIN-COTTER | |
| 17. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 18. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 19. | 8H-8898 | [2] | PIN | |
| 20. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 21. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 22. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 23. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 24. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 25. | 8T-6381 M | [6] | BOLT (M20X2.5X120-MM) | |
| 26. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110866
387-8316: PUSH ARM GP
387-8316 PUSH ARM GP -SEMI-UNIVERSAL
S/N NDY212-UP
PART OF 481-4907, 481-4908 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N NDY212-UP
PART OF 481-4907, 481-4908 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1481 | [1] | LINK AS | |
| 2. | 476-3494 C | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 8E-5703 B | [78] | SHIM (0.8-MM THK) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 9. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 10. | 282-9090 | [2] | RETAINER | |
| 11. | 290-8226 | [2] | PIN | |
| 12. | 334-1751 | [1] | PUSH ARM AS (LH) | |
| 12A. | 179-6152 | [1] | BEARING | |
| 12B. | 4T-0780 | [1] | TRUNNION | |
| 12C. | 8P-9770 | [1] | PLATE | |
| 12D. | 124-9666 | [1] | BRACKET | |
| 12E. | 179-6153 | [1] | BEARING | |
| 12F. | 7T-5140 | [1] | STEP | |
| 13. | 509-2732 C | [1] | PUSH ARM AS (RH) | |
| 13A. | 7T-5140 | [1] | STEP | |
| 13B. | 8P-9770 | [1] | PLATE | |
| 13C. | 9W-2579 | [1] | PLATE | |
| 13D. | 179-6152 | [1] | BEARING | |
| 13E. | 179-6153 | [1] | BEARING | |
| 13F. | 458-2088 | [1] | BRACKET | |
| 14. | 367-9478 Y | [1] | CYLINDER GP-TILT | |
| 15. | 460-2430 C | [2] | PLATE | |
| 16. | 3B-4632 | [2] | PIN-COTTER | |
| 17. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 18. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 19. | 8H-8898 | [2] | PIN | |
| 21. | 8T-4131 CM | [4] | NUT (M20X2.5-THD) | |
| 22. | 8T-4167 C | [10] | WASHER-HARD (26X44X4-MM THK) | |
| 23. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 24. | 8T-1482 C | [6] | WASHER-HARD (26X50X8-MM THK) | |
| 25. | 8T-6380 CM | [6] | BOLT (M24X3X130-MM) | |
| 26. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 27. | 8T-4001 CM | [6] | NUT (M24X3-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110867
387-8365: PUSH ARM GP
387-8365 PUSH ARM GP
S/N JML1-283
PART OF 481-4911, 481-4912 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N JML1-283
PART OF 481-4911, 481-4912 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1481 | [1] | LINK AS | |
| 2. | 4T-1520 | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 | [52] | SHIM (0.8-MM THK) | |
| 4. | 8E-5703 | [78] | SHIM (0.8-MM THK) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 9. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 10. | 282-9090 | [2] | RETAINER | |
| 11. | 290-8226 | [2] | PIN | |
| 12. | 334-1775 | [1] | PUSH ARM AS (LH) | |
| 12A. | 4T-0780 | [1] | TRUNNION | |
| 12B. | 7T-5140 | [1] | STEP | |
| 12C. | 179-6152 | [1] | BEARING | |
| 12D. | 179-6153 | [1] | BEARING | |
| 13. | 334-1776 | [1] | PUSH ARM AS (RH) | |
| 13A. | 7T-5140 | [1] | STEP | |
| 13B. | 179-6152 | [1] | BEARING | |
| 13C. | 179-6153 | [1] | BEARING | |
| 14. | 367-9478 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 15. | 387-8337 | [2] | PLATE | |
| 16. | 3B-4633 | [2] | PIN-COTTER | |
| 17. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 18. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 19. | 8H-8898 | [2] | PIN | |
| 20. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 21. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 22. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 23. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 24. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 25. | 8T-6381 M | [6] | BOLT (M20X2.5X120-MM) | |
| 26. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110868
387-8365: PUSH ARM GP
387-8365 PUSH ARM GP
S/N JML284-UP
PART OF 481-4911, 481-4912 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N JML284-UP
PART OF 481-4911, 481-4912 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1481 | [1] | LINK AS | |
| 2. | 476-3494 C | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 8E-5703 B | [78] | SHIM (0.8-MM THK) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 9. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 10. | 282-9090 | [2] | RETAINER | |
| 11. | 290-8226 | [2] | PIN | |
| 12. | 334-1775 | [1] | PUSH ARM AS (LH) | |
| 12A. | 4T-0780 | [1] | TRUNNION | |
| 12B. | 7T-5140 | [1] | STEP | |
| 12C. | 179-6152 | [1] | BEARING | |
| 12D. | 179-6153 | [1] | BEARING | |
| 13. | 509-2734 C | [1] | PUSH ARM AS | |
| 13A. | 7T-5140 | [1] | STEP | |
| 13B. | 179-6152 | [1] | BEARING | |
| 13C. | 179-6153 | [1] | BEARING | |
| 13D. | 458-2088 | [1] | BRACKET | |
| 14. | 367-9478 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 15. | 460-2430 C | [2] | PLATE | |
| 16. | 3B-4630 | [2] | PIN-COTTER | |
| 17. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 18. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 19. | 8H-8898 | [2] | PIN | |
| 20. | 8T-4001 CM | [6] | NUT (M24X3-THD) | |
| 21. | 8T-4131 CM | [4] | NUT (M20X2.5-THD) | |
| 22. | 8T-4167 C | [10] | WASHER-HARD (26X44X4-MM THK) | |
| 23. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 24. | 8T-1482 C | [6] | WASHER-HARD (26X50X8-MM THK) | |
| 25. | 8T-6380 CM | [6] | BOLT (M24X3X130-MM) | |
| 26. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00742110869
433-0327: PUSH ARM GP
433-0327 PUSH ARM GP
S/N MB51-228
PART OF 481-4909, 481-4910 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N MB51-228
PART OF 481-4909, 481-4910 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1481 | [1] | LINK AS | |
| 2. | 4T-1520 | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 | [52] | SHIM (0.8-MM THK) | |
| 4. | 8E-5703 | [78] | SHIM (0.8-MM THK) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 9. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 10. | 282-9090 | [2] | RETAINER | |
| 11. | 290-8226 | [2] | PIN | |
| 12. | 334-1759 | [1] | PUSH ARM AS (LH) | |
| 12A. | 4T-0780 | [1] | TRUNNION | |
| 12B. | 179-6152 | [1] | BEARING | |
| 12C. | 179-6153 | [1] | BEARING | |
| 13. | 334-1760 | [1] | PUSH ARM AS (RH) | |
| 13A. | 7T-5140 | [1] | STEP | |
| 13B. | 179-6152 | [1] | BEARING | |
| 13C. | 179-6153 | [1] | BEARING | |
| 14. | 367-9478 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 15. | 387-8337 | [2] | PLATE | |
| 16. | 3B-4633 | [2] | PIN-COTTER | |
| 17. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 18. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 19. | 8H-8898 | [2] | PIN | |
| 20. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 21. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 22. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 23. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 24. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 25. | 8T-6381 M | [6] | BOLT (M20X2.5X120-MM) | |
| 26. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
