AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

459-1848 LINES GP-TILT CYLINDER S/N MB81-UP PART OF 442-1053 HYDRAULIC AR D8T TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D8T TRACK-TYPE TRACTOR MB8
 D8T TRACK-TYPE TRACTOR MB800001-UP (MACHINE) POWERED BY C15 Engine M0075390 D8T MB8   (2016)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-LIFT CYLINDER
459-1847 LINES GP-LIFT CYLINDER
LINES GP-PIN PULLER CYLINDER
160-3619 LINES GP-PIN PULLER CYLINDER
LINES GP-TILT CYLINDER
459-1848 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
468-0755 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
472-4431 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
472-4432 LINES GP-TILT CYLINDER
 

#M00753900540
 

459-1848: LINES GP-TILT CYLINDER

459-1848 LINES GP-TILT CYLINDER
S/N MB81-UP
PART OF 442-1053 HYDRAULIC AR
i06863560 M0075390
4591848 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-6887 [1] MANIFOLD  
2. 218-7227 [1] BRACKET AS  
3. 440-9537 [1] BRACKET AS  
4. 471-9661 I [1] HOSE AS  
5. 471-9662 I [1] HOSE AS  
6. 473-8670 [1] TUBE AS  
7. 473-8671 [1] TUBE AS  
8. 490-4274 [1] BRACKET AS  
9. 1P-3703 [2] SEAL-RECTANGULAR  
10. 4J-5267 [2] SEAL-O-RING  
11. 6V-9746 [2] SEAL-O-RING  
12. 7G-3832 [3] GROMMET  
13. 7G-3833 [5] CLIP (TAB)  
14. 7G-3834 [5] CLIP (SLOT)  
15. 7X-7729 [6] WASHER (11X25X3-MM THK)  
16. 8C-3174 [2] GROMMET  
17. 8C-3205 [4] FLANGE-HALF  
18. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 8T-4196 M [12] BOLT (M10X1.5X35-MM)  
24. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900541
 

468-0755: LINES GP-TILT CYLINDER

468-0755 LINES GP-TILT CYLINDER -DUAL TILT
S/N MB81-UP
PART OF 468-0754 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06882826 M0075390
4680755 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 468-0756 [2] GUARD  
2. 5S-8712 [6] BLOCK  
3. 7W-3447 [8] SPACER (10.2X19.05X10.2-MM THK)  
4. 108-1225 [2] TUBE AS  
5. 108-1226 [2] TUBE AS  
6. 159-0867 [1] GUARD (LH)  
7. 179-7209 [2] TUBE AS  
8. 179-7210 [1] GUARD (RH)  
9. 183-5408 I [2] HOSE AS  
10. 239-3344 [2] TUBE AS  
11. 239-7071 I [2] HOSE AS  
12. 239-7072 I [2] HOSE AS  
13. 239-7074 I [2] HOSE AS  
14. 239-7078 [1] GUARD  
15. 241-7877 [2] TUBE AS  
16. 252-6517 [3] BLOCK  
17. 297-4986 I [2] HOSE AS  
18. 4J-0520 [2] SEAL-O-RING  
19. 4J-5267 [22] SEAL-O-RING  
20. 5P-1076 [11] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-4108 [3] CLAMP  
22. 7X-2559 M [4] BOLT (M16X2X160-MM)  
23. 8C-3205 [32] FLANGE-HALF  
24. 8C-3206 [4] FLANGE-HALF  
25. 8T-4121 [70] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4139 M [11] BOLT (M12X1.75X30-MM)  
28. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
29. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
30. 8T-4196 M [70] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
33. 8T-4821 [6] WASHER (13.5X40X3-MM THK)  
34. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
35. 8T-6868 M [3] BOLT (M12X1.75X80-MM)  
36. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900542
 

472-4431: LINES GP-TILT CYLINDER

472-4431 LINES GP-TILT CYLINDER -FAN
S/N MB81-UP
PART OF 486-6669, 486-6699 DISTRIBUTION AR
AN ATTACHMENT
i06880387 M0075390
4724431 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-5804 [1] TUBE AS  
2. 212-5805 [1] TUBE AS  
3. 226-7906 [1] MANIFOLD  
4. 514-7369 [1] COVER AS  
5. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
6. 148-8375 [1] ELBOW AS  
  6V-8398 [2] SEAL-O-RING  
  6V-8981 [1] ELBOW  
7. 4J-0519 [4] SEAL-O-RING  
8. 4J-5267 [2] SEAL-O-RING  
9. 5H-4018 [2] COVER  
10. 6V-9169 [1] NUT (13/16-16-THD)  
11. 7X-7729 [2] WASHER (11X25X3-MM THK)  
12. 8C-3205 [4] FLANGE-HALF  
13. 8T-4121 [27] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
15. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
16. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
17. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#M00753900543
 

472-4432: LINES GP-TILT CYLINDER

472-4432 LINES GP-TILT CYLINDER -FAN
S/N MB81-UP
DUAL TILT
AN ATTACHMENT
i06888371 M0075390
4724432 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-9573 [1] TUBE AS  
2. 211-9574 [1] TUBE AS  
3. 217-4326 Y [1] VALVE GP-CONTROL (BULLDOZER, DUAL TILT)  
4. 221-5400 [1] ELBOW  
5. 237-4021 [1] PLATE AS  
6. 360-5332 I [1] HOSE AS  
7. 360-5333 I [1] HOSE AS  
8. 387-5700 I [1] HOSE AS  
9. 387-5702 I [1] HOSE AS  
10. 487-6478 [1] SWITCH AS-ROCKER (AUTOMATIC BLADE)  
11. 514-7368 [1] COVER AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
12. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
13. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
14. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
15. 148-8417 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8941 [1] REDUCER  
16. 149-5452 [2] UNION AS (STRAIGHT)  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
17. 153-6259 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8777 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
18. 169-4273 [1] TEE AS  
  6V-8398 [3] SEAL-O-RING  
  7X-7715 [1] TEE  
19. 180-3998 M [1] STUD (M10X1.5X55-MM)  
20. 1P-3703 [1] SEAL-RECTANGULAR  
21. 299-3427 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
22. 344-5675 M [1] NUT (M10X1.5-THD)  
23. 4J-0519 [3] SEAL-O-RING  
24. 4J-5267 [1] SEAL-O-RING  
25. 6V-9168 [2] NUT (11/16-16-THD)  
26. 6V-9169 [1] NUT (13/16-16-THD)  
27. 8C-3205 [4] FLANGE-HALF  
28. 8T-1887 [4] CLIP (SLOT)  
29. 8T-1888 [4] CLIP (TAB)  
30. 8T-4121 [35] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
32. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
33. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
34. 8T-4182 M [12] BOLT (M10X1.5X45-MM)  
35. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
36. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
37. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
38. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
40. 9X-6580 [1] NUT (1-3/16-12-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00753900544
 

488-0851: LINES GP-TILT CYLINDER

488-0851 LINES GP-TILT CYLINDER
S/N MB81-UP
PART OF 488-0850 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06893997 M0075390
4880851 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-8712 [6] BLOCK  
2. 7W-3447 [8] SPACER (10.2X19.05X10.2-MM THK)  
3. 108-1225 [2] TUBE AS  
4. 108-1226 [2] TUBE AS  
5. 159-0867 [1] GUARD (LH)  
6. 179-7209 [2] TUBE AS  
7. 179-7210 [1] GUARD (RH)  
8. 239-3344 [2] TUBE AS  
9. 239-7071 I [2] HOSE AS  
10. 239-7072 I [2] HOSE AS  
11. 252-6517 [2] BLOCK  
12. 256-4907 [2] TUBE AS  
13. 261-4844 [1] GUARD  
14. 297-4986 I [2] HOSE AS  
15. 385-6011 I [2] HOSE AS  
16. 385-6013 I [2] HOSE AS  
17. 468-0756 [2] GUARD  
18. 4J-0520 [2] SEAL-O-RING  
19. 4J-5267 [22] SEAL-O-RING  
20. 5P-1076 [13] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-4108 [4] CLAMP  
22. 7X-2559 M [4] BOLT (M16X2X160-MM)  
23. 8C-3205 [32] FLANGE-HALF  
24. 8C-3206 [4] FLANGE-HALF  
25. 8T-4121 [70] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4139 M [15] BOLT (M12X1.75X30-MM)  
28. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
29. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
30. 8T-4196 M [70] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
33. 8T-4821 [6] WASHER (13.5X40X3-MM THK)  
34. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
35. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
36. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900545
 

509-5047: LINES GP-TILT CYLINDER

509-5047 LINES GP-TILT CYLINDER -GRADE CONTROL
S/N MB81-UP
SINGLE TILT
PART OF 509-5048 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06885413 M0075390
5095047 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9333 [1] GUARD  
2. 8E-6183 [1] TUBE AS  
3. 239-3344 [2] TUBE AS  
4. 239-3345 I [2] HOSE AS  
5. 295-6897 I [2] HOSE AS  
6. 509-5046 [1] GUARD AS  
  171-2419 M [2] STUD-WELD (M10X1.5X35-MM)  
7. 4J-5267 [9] SEAL-O-RING  
8. 5P-1076 [10] WASHER-HARD (13.5X30X4-MM THK)  
9. 7D-4108 [3] CLAMP  
10. 7X-2559 M [2] BOLT (M16X2X160-MM)  
11. 8C-3205 [12] FLANGE-HALF  
12. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4139 M [13] BOLT (M12X1.75X30-MM)  
15. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
16. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
19. 9X-2027 [4] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900546
 

509-5049: LINES GP-TILT CYLINDER

509-5049 LINES GP-TILT CYLINDER -GRADE CONTROL
S/N MB81-UP
DUAL TILT
PART OF 509-5050 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06887117 M0075390
5095049 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 468-0756 [2] GUARD  
2. 5S-8712 [6] BLOCK  
3. 7W-3447 [8] SPACER (10.2X19.05X10.2-MM THK)  
4. 108-1225 [2] TUBE AS  
5. 108-1226 [2] TUBE AS  
6. 159-0867 [1] GUARD (LH)  
7. 179-7209 [2] TUBE AS  
8. 179-7210 [1] GUARD (RH)  
9. 183-5408 I [2] HOSE AS  
10. 239-3344 [2] TUBE AS  
11. 239-7071 I [2] HOSE AS  
12. 239-7072 I [2] HOSE AS  
13. 239-7074 I [2] HOSE AS  
14. 241-7877 [2] TUBE AS  
15. 252-6517 [3] BLOCK  
16. 297-4986 I [2] HOSE AS  
17. 509-5051 [1] GUARD AS  
18. 4J-0520 [2] SEAL-O-RING  
19. 4J-5267 [22] SEAL-O-RING  
20. 5P-1076 [11] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-4108 [3] CLAMP  
22. 7X-2559 M [4] BOLT (M16X2X160-MM)  
23. 8C-3205 [32] FLANGE-HALF  
24. 8C-3206 [4] FLANGE-HALF  
25. 8T-4121 [70] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4139 M [11] BOLT (M12X1.75X30-MM)  
28. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
29. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
30. 8T-4196 M [70] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
33. 8T-4821 [6] WASHER (13.5X40X3-MM THK)  
34. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
35. 8T-6868 M [3] BOLT (M12X1.75X80-MM)  
36. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900547
 

511-3140: LINES GP-TILT CYLINDER

511-3140 LINES GP-TILT CYLINDER -GRADE CONTROL
S/N MB81-UP
SINGLE TILT
PART OF 511-1730 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06891968 M0075390
5113140 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9333 [1] GUARD  
2. 8E-6183 [1] TUBE AS  
3. 239-3345 I [2] HOSE AS  
4. 256-4907 [2] TUBE AS  
5. 295-6897 I [2] HOSE AS  
6. 511-5868 [1] GUARD AS  
7. 4J-5267 [9] SEAL-O-RING  
8. 5P-1076 [12] WASHER-HARD (13.5X30X4-MM THK)  
9. 7D-4108 [4] CLAMP  
10. 7X-2559 M [2] BOLT (M16X2X160-MM)  
11. 8C-3205 [12] FLANGE-HALF  
12. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
15. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
16. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
19. 9X-2027 [4] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900548
 

511-3272: LINES GP-TILT CYLINDER

511-3272 LINES GP-TILT CYLINDER
S/N MB81-UP
PART OF 511-1736 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i07047064 M0075390
5113272 LINES GP-TILT CYLINDER Parts scheme 5113272 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-8712 [6] BLOCK  
2. 7W-3447 [8] SPACER (10.2X19.05X10.2-MM THK)  
3. 108-1225 [2] TUBE AS  
4. 108-1226 [2] TUBE AS  
5. 159-0867 [1] GUARD (LH)  
6. 179-7209 [2] TUBE AS  
7. 179-7210 [1] GUARD (RH)  
8. 239-3344 [2] TUBE AS  
9. 239-7071 I [2] HOSE AS  
10. 239-7072 I [2] HOSE AS  
11. 252-6517 [2] BLOCK  
12. 256-4907 [2] TUBE AS  
13. 297-4986 I [2] HOSE AS  
14. 385-6011 I [2] HOSE AS  
15. 385-6013 I [2] HOSE AS  
16. 468-0756 [2] GUARD  
17. 511-5871 [1] GUARD AS  
18. 4J-0520 [2] SEAL-O-RING  
19. 4J-5267 [22] SEAL-O-RING  
20. 5P-1076 [13] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-4108 [4] CLAMP  
22. 7X-2559 M [4] BOLT (M16X2X160-MM)  
23. 8C-3205 [32] FLANGE-HALF  
24. 8C-3206 [4] FLANGE-HALF  
25. 8T-4121 [70] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4139 M [15] BOLT (M12X1.75X30-MM)  
28. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
29. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
30. 8T-4196 M [70] BOLT (M10X1.5X35-MM)  
31. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
33. 8T-4821 [6] WASHER (13.5X40X3-MM THK)  
34. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
35. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
36. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00753900549
 

511-7651: LINES GP-TILT CYLINDER

511-7651 LINES GP-TILT CYLINDER -GRADE CONTROL
S/N MB81-UP
LOW GROUND PRESSURE, SINGLE TILT
PART OF 511-5663 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06888422 M0075390
5117651 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9333 [1] GUARD  
2. 8E-6183 [1] TUBE AS  
3. 239-9970 I [2] HOSE AS  
4. 256-4907 [2] TUBE AS  
5. 297-4986 I [2] HOSE AS  
6. 511-5868 [1] GUARD AS  
7. 4J-5267 [9] SEAL-O-RING  
8. 5P-1076 [12] WASHER-HARD (13.5X30X4-MM THK)  
9. 7D-4108 [4] CLAMP  
10. 7X-2559 M [2] BOLT (M16X2X160-MM)  
11. 8C-3205 [12] FLANGE-HALF  
12. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
15. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
16. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
19. 9X-2027 [4] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D8T :

LINES GP-RIPPER
473-9110 LINES GP-RIPPER
LINES GP-RIPPER
473-9110 LINES GP-RIPPER
LINES GP-RIPPER
153-4846 LINES GP-RIPPER
LINES GP-PUMP
459-1850 LINES GP-PUMP
LINES GP-PIN PULLER CYLINDER
160-3619 LINES GP-PIN PULLER CYLINDER
LINES GP-PILOT
473-5432 LINES GP-PILOT
LINES GP-LIFT CYLINDER
459-1847 LINES GP-LIFT CYLINDER
LINES GP-HYDRAULIC FAN
459-1852 LINES GP-HYDRAULIC FAN
LINES GP-TILT CYLINDER
468-0755 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
472-4431 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
472-4432 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
488-0851 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
509-5047 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
509-5049 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
511-3140 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
511-3272 LINES GP-TILT CYLINDER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.