WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)FORK GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#M00879851770
447-0352: EDGE-END
447-0352 EDGE-END -RH
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851771
500-1943: EDGE-END
500-1943 EDGE-END
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-8091 | [1] | EDGE-END |
#M00879851772
505-6000: EDGE-END
505-6000 EDGE-END
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851773
523-9783: EDGE-END
523-9783 EDGE-END
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851774
523-9795: EDGE-END
523-9795 EDGE-END
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851775
523-9803: EDGE-END
523-9803 EDGE-END
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851776
447-0350: EDGE-SEGMENT
447-0350 EDGE-SEGMENT -CENTER
S/N KSA1-UP
S/N KSA1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00879851777
384-3214: FORK GP-LOG
384-3214 FORK GP-LOG -PIN-ON
S/N KSA1-UP
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
S/N KSA1-UP
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-1195 | [4] | SPACER-SPECIAL | |
| 2. | 8G-6122 | [2] | SPACER (23X40X19-MM THK) | |
| 3. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 4. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 5. | 159-8036 | [1] | FILM-WARNING (READ OMM) | |
| 6. | 253-3431 | [2] | FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM) | |
| 7. | 363-2876 C | [2] | PIN AS | |
| 8. | 384-4133 Y | [1] | FRAME GP-FORK (PIN-ON) | |
| 9. | 384-4134 | [1] | CLAMP AS | |
| 9A. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 9B. | 7K-9209 | [4] | SEAL-LIP TYPE | |
| 9C. | 361-4648 | [2] | BUSHING | |
| 10. | 385-3395 C | [2] | PIN AS | |
| 11. | 385-4585 Y | [2] | CYLINDER GP-FORK | |
| 12. | 385-5357 C | [2] | PIN AS | |
| 13. | 387-1735 CI | [2] | HOSE AS | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 387-2020 CI | [1] | HOSE AS | |
| 16. | 387-2021 CI | [1] | HOSE AS | |
| 17. | 387-2022 CI | [1] | HOSE AS | |
| 18. | 387-2023 CI | [1] | HOSE AS | |
| 19. | 312-5694 C | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 20. | 3D-2824 | [4] | SEAL-O-RING | |
| 21. | 5P-7466 | [2] | CLIP (SLOT) | |
| 22. | 5P-7467 | [2] | CLIP (TAB) | |
| 23. | 5P-8112 | [2] | GROMMET | |
| 24. | 6V-9007 | [4] | ELBOW | |
| 25. | 6V-9160 | [2] | TEE-FACE SEAL | |
| 26. | 6V-9746 | [10] | SEAL-O-RING | |
| 30. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 31. | 8T-4139 CM | [4] | BOLT (M12X1.75X30-MM) | |
| 32. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 33. | 2P-1293 C | [2] | LOCKNUT (1-3/16-12-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879851778
388-1946: FORK GP-PALLET
388-1946 FORK GP-PALLET
S/N KSA1-UP
2438-MM (96-IN) WIDE, 1219-MM (48-IN) TINES
FOR USE WITH 950K, 962K, 966K, 972K WHEEL LOADERS, 963D TRACK LOADERS
S/N KSA1-UP
2438-MM (96-IN) WIDE, 1219-MM (48-IN) TINES
FOR USE WITH 950K, 962K, 966K, 972K WHEEL LOADERS, 963D TRACK LOADERS
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS#M00879851779
527-2929: FORK GP-PALLET
527-2929 FORK GP-PALLET
S/N KSA1-UP
2440-MM (96-IN) WIDE, 2134-MM (84-IN) TINES
FOR USE WITH HPL COUPLER, 3RD VALVE HYDRAULIC ARRANGEMENT
S/N KSA1-UP
2440-MM (96-IN) WIDE, 2134-MM (84-IN) TINES
FOR USE WITH HPL COUPLER, 3RD VALVE HYDRAULIC ARRANGEMENT
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8625 | [2] | ELBOW | |
| 2. | 6V-8724 | [1] | ELBOW | |
| 3. | 8T-1905 | [1] | ELBOW | |
| 4. | 137-4234 | [1] | PLATE-IDENTIFICATION (WORK TOOL) | |
| 5. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 6. | 159-8036 | [2] | FILM-WARNING (READ OMM) | |
| 7. | 165-5763 | [2] | PLATE | |
| 8. | [2] | TINE | ||
| 9. | 253-3431 | [2] | FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM) | |
| 10. | 284-7718 Y | [2] | CYLINDER GP-FORK | |
| 11. | 284-7722 | [1] | VALVE-RELIEF | |
| 12. | 284-7723 | [1] | VALVE-FLOW DIVIDER | |
| 13. | 338-5744 I | [2] | HOSE AS | |
| 14. | 350-7111 I | [1] | HOSE AS | |
| 15. | 350-7112 I | [1] | HOSE AS | |
| 16. | 350-7113 I | [1] | HOSE AS | |
| 17. | 350-7114 I | [1] | HOSE AS | |
| 18. | 350-7115 I | [1] | HOSE AS | |
| 19. | 389-6401 | [2] | YOKE AS | |
| 20. | 527-3391 Y | [1] | FRAME GP-FORK | |
| 21. | 165-5760 | [1] | SHAFT | |
| 22. | 1A-0458 | [4] | BOLT (3/4-10X1.75-IN) | |
| 23. | 1D-4539 | [4] | BOLT (5/16-18X2.5-IN) | |
| 24. | 1H-0182 | [4] | PIN | |
| 25. | 211-5237 | [2] | CONNECTOR | |
| 26. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 27. | 3B-4505 | [4] | LOCKWASHER | |
| 28. | 3B-4631 | [4] | PIN-COTTER | |
| 29. | 3J-1907 | [3] | SEAL-O-RING | |
| 30. | 3K-0360 | [4] | SEAL-O-RING | |
| 31. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 32. | 5P-8250 | [4] | WASHER (28X49X5-MM THK) | |
| 33. | 5S-0003 | [4] | NUT (5/16-18-THD) | |
| 34. | 6V-8397 | [11] | SEAL-O-RING | |
| 35. | 6V-8398 | [4] | SEAL-O-RING | |
| 36. | 6V-8634 | [1] | CONNECTOR | |
| 37. | 6V-8636 | [1] | CONNECTOR | |
| 38. | 6V-9836 | [1] | TEE-SWIVEL | |
| 39. | 7V-5626 | [4] | CLAMP | |
| 40. | 7V-5628 | [2] | PLATE (TOP) | |
| 41. | 8T-1683 | [1] | ELBOW | |
| 42. | 8C-6869 | [4] | CONNECTOR | |
| 43. | 9F-7022 | [4] | BOLT (1/4-20X1.5-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
