AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

421-7193 ALTERNATOR GP-CHARGING S/N JA31-UP PART OF 518-4178 ALTERNATOR GP-CHARGING MD6310 ROTARY DRILL


BASIC ENGINE
PULLEY GP
ELECTRICAL AND STARTING SYSTEM
BOX GP
ELECTRONICS GP
CONTROL GP-ELECTRONIC

ROTARY DRILL MD6310 ROTARY DRILL DLZ
 MD6310 Rotary Blasthole Drill DLZ00001-UP (MACHINE) POWERED BY C32 Engine M0089129 MD6310 DLZ   (2018)

BASIC ENGINE

PULLEY GP
PULLEY GP
510-8987 PULLEY GP
ROCKER ARM GP
437-3877 ROCKER ARM GP
ROCKER ARM GP
437-3878 ROCKER ARM GP
ROCKER ARM GP
437-4420 ROCKER ARM GP
ROCKER ARM GP
437-4420 ROCKER ARM GP
ROCKER ARM GP
524-3708 ROCKER ARM GP
ALTERNATOR GP-CHARGING
421-7193 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
518-4178 ALTERNATOR GP-CHARGING
 

#M00891290130
 

421-7193: ALTERNATOR GP-CHARGING

421-7193 ALTERNATOR GP-CHARGING
S/N JA31-UP
PART OF 518-4178 ALTERNATOR GP-CHARGING
i06238007 M0089129
4217193 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 425-7653 [1] KIT-REGULATOR  
    (INCLUDES REGULATOR, TERMINAL BOOT, CONNECTOR CAP & SCREWS)
2. 461-9977 [1] KIT-COVER  
    (INCLUDES PLATE COVER, HEAT SINK COVER, WASHERS, SCREWS & SPACERS)
3. 461-9978 [1] KIT-FAN  
    (INCLUDES FAN, WOODRUFF KEY, NUT, WASHER & RING)
4. 524-1843 [1] CAP-PROTECTIVE  
 

#M00891290131
 

518-4178: ALTERNATOR GP-CHARGING

518-4178 ALTERNATOR GP-CHARGING
S/N JA31-UP
PART OF 525-1537 ENGINE AR-COMPLETE
i07200945 M0089129
5184178 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 524-7820 [1] PULLEY  
2. 372-5850 [1] BELT-SERPENTINE  
3. 421-7193 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 225-AMPERE)  
4. 528-7142 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
5. 132-7551 [2] SPACER (11X19X6-MM THK)  
6. 7X-0293 [2] BOLT (3/8-16X4.75-IN)  
7. 7X-0294 [2] BOLT (3/8-16X5-IN)  
8. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00891290132
 

520-1593: BOX GP-CONTROL

520-1593 BOX GP-CONTROL
S/N DLZ1-UP
PART OF 539-1891 LINES GP-AIR COMPRESSOR
i07246237 M0089129
5201593 BOX GP-CONTROL Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 524-7030 Y [1] BOX GP-CONTROL  
2. 524-7031 [1] BRACKET GP-MOUNTING  
  520-1589 [1] BRACKET  
  520-1590 [1] BRACKET  
3. 7X-7877 E STRIP-EDGE (43.5-CM EACH)  
3A. 7X-7877 E STRIP-EDGE (118.5-CM)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#M00891290133
 

524-7030: BOX GP-CONTROL

524-7030 BOX GP-CONTROL
S/N DLZ1-UP
PART OF 520-1596 BOX & MOUNTING GP, 520-1593 BOX GP-CONTROL
i07246533 M0089129
5247030 BOX GP-CONTROL Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 275-0571 [1] CAM-LATCH  
2. 465-6593 J [1] LATCH AS  
3. [1] COVER  
4. 520-1592 [1] BOX AS  
  J   REQUIRES CORPORATE KEY
 

#M00891290134
 

503-7773: BOX GP-ELECTRONIC

503-7773 BOX GP-ELECTRONIC
S/N DLZ1-UP
PART OF 494-1196 ENCLOSURE AR
i07203086 M0089129
5037773 BOX GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 275-0571 [1] CAM-LATCH  
2. 465-6593 J [1] LATCH AS  
3. 513-1411 [1] BOX AS  
3A. 1V-8732 [1] HANDLE  
3B. 3R-9322 [4] HINGE  
4. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
5. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#M00891290135
 

529-7694: BOX GP-TERMINAL

529-7694 BOX GP-TERMINAL
S/N DLZ1-UP
PART OF 529-1737, 530-1698 WIRING GP-COLD WEATHER
i07245985 M0089129
5297694 BOX GP-TERMINAL Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] GROMMET AS  
2. 526-0705 [1] BOX AS  
3. 526-0708 [1] PLATE  
4. 5C-9553 M [4] BOLT (M6X1X16-MM)  
5. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
7. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#M00891290136
 

525-3032: CABINET GP-INVERTER

525-3032 CABINET GP-INVERTER
S/N DLZ1-UP
240-VOLT, 100-AMPERE. GENSET
PART OF 529-1737, 530-1698 WIRING GP-COLD WEATHER
i07213267 M0089129
5253032 CABINET GP-INVERTER Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 540-4266 [1] HINGE AS  
2. 540-4267 [1] HANDLE AS  
3. 540-4268 [1] SWITCH-POWER (INPUT)  
4. 540-4269 [2] VENT-AIR  
5. 540-4270 [1] HEATER (120-VOLT, 150-WATT)  
6. 540-4272 [1] BATTERY CHARGER (50-HZ)  
7. 540-4273 [1] SWITCH-HEATER (POWER DISTRIBUTION)  
8. 540-4274 [1] METER-VOLT  
9. 540-4275 [1] LIGHT (LED)  
10. 540-4276 [1] LOCKOUT-SWITCH (DOOR)  
11. 540-4277 [4] MOUNT-VIBRATION  
12. 540-4278 [1] CIRCUIT BREAKER (100-AMPERE)  
13. 540-4279 [6] CIRCUIT BREAKER (120-VOLT, 15-AMPERE)  
14. 540-4280 [6] CIRCUIT BREAKER (240-VOLT, 15-AMPERE)  
 

#M00891290137
 

528-4940: CONTROL & MOUNTING GP

528-4940 CONTROL & MOUNTING GP
S/N DLZ1-UP
PART OF 493-0690 AIR COMPRESSOR AR
i07248879 M0089129
5284940 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
2. 061-7284 [1] ROD  
3. 119-5093 [1] ROD  
4. 169-7393 [1] CONNECTOR AS  
  3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
5. 326-2617 [1] BLOCK  
6. 341-1083 Y [1] VALVE GP-GAS CONTROL  
7. 378-1020 [1] ACTUATOR GP  
8. 385-1173 Y [1] SENSOR GP-PRESSURE (AIR COMPRESSOR)  
9. 499-3732 [1] LINK  
10. 528-3733 I [1] HOSE AS  
11. 528-8605 [1] BRACKET  
12. 558-6529 [1] BRACKET AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
13. 565-0103 [1] LINK  
14. 533-2226 Y [1] VALVE GP-ACTUATOR (CONTROL)  
15. 534-2157 I [1] HOSE AS  
16. 004-3099 [1] CONNECTOR  
17. 031-4155 [4] LOCKNUT (5/16-18-THD)  
18. 2P-8511 [1] ELBOW-FLARED  
19. 3J-7354 [1] SEAL-O-RING  
20. 4L-6454 [2] BOLT (3/8-16X1-IN)  
21. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
22. 4R-8686 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  171-6469 [1] ELBOW  
23. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
24. 5P-5005 [2] REDUCER-FLARED  
25. 6V-3964 [2] WASHER-HARD (8.8X25.5X5-MM THK)  
26. 6V-8801 [2] NUT (3/8-16-THD)  
27. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
28. 6V-9163 [1] ROD END (BEARING)  
29. 7H-3641 [1] END-ROD (5/16-24-THD)  
30. 299-3436 [4] BOLT (7/8-9X3.5-IN)  
31. 7X-2534 M [3] BOLT (M6X1X50-MM)  
32. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
33. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
34. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
35. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
36. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 9S-4182 [1] PLUG (7/16-20-THD)  
39. 9X-2027 [1] WASHER (11X18X2-MM THK)  
40. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00891290138
 

547-7386: CONTROL & MOUNTING GP

547-7386 CONTROL & MOUNTING GP
S/N DLZ1-UP
PART OF 493-0680 AIR COMPRESSOR AR
i07249027 M0089129
5477386 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0370 [2] BOLT (3/4-10X3.5-IN)  
2. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
3. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 061-7284 [1] ROD  
5. 119-5093 [1] ROD  
6. 169-7393 [1] CONNECTOR AS  
  3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
7. 326-2617 [1] BLOCK  
8. 341-1083 Y [1] VALVE GP-GAS CONTROL  
9. 378-1020 [1] ACTUATOR GP (GOVERNOR CONTROL)  
10. 385-1173 Y [1] SENSOR GP-PRESSURE (AIR COMPRESSOR)  
11. 499-3732 [1] LINK  
12. 533-2226 Y [1] VALVE GP-ACTUATOR (CONTROL)  
13. 562-6538 [1] BRACKET AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
14. 541-6722 I [1] HOSE AS  
15. 541-6723 I [1] HOSE AS  
16. 562-6027 [1] LINK  
17. 031-4155 [4] LOCKNUT (5/16-18-THD)  
18. 052-0741 [1] ELBOW  
19. 3J-7354 [1] SEAL-O-RING  
20. 4L-6454 [2] BOLT (3/8-16X1-IN)  
21. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
22. 4R-8686 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  171-6469 [1] ELBOW  
23. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
24. 5P-5007 [1] REDUCER  
25. 6K-1972 [1] ELBOW-FLARED  
26. 6V-3964 [2] WASHER-HARD (8.8X25.5X5-MM THK)  
27. 6V-8801 [2] NUT (3/8-16-THD)  
28. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
29. 6V-9163 [1] ROD END (BEARING)  
30. 7H-3641 [1] END-ROD (5/16-24-THD)  
31. 7X-2534 M [3] BOLT (M6X1X50-MM)  
32. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
33. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
34. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
35. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
36. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 9S-4182 [1] PLUG (7/16-20-THD)  
38. 9X-2027 [1] WASHER (11X18X2-MM THK)  
39. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00891290139
 

547-7387: CONTROL & MOUNTING GP

547-7387 CONTROL & MOUNTING GP
S/N DLZ1-UP
PART OF 493-0670 AIR COMPRESSOR AR
i07248871 M0089129
5477387 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your MD6310 ROTARY DRILL:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0370 [2] BOLT (3/4-10X3.5-IN)  
2. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
3. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 061-7284 [1] ROD  
5. 119-5093 [1] ROD  
6. 169-7393 [1] CONNECTOR AS  
  3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
7. 326-2617 [1] BLOCK  
8. 341-1083 Y [1] VALVE GP-GAS CONTROL  
9. 378-1020 [1] ACTUATOR GP  
10. 385-1173 Y [1] SENSOR GP-PRESSURE (AIR COMPRESSOR)  
11. 499-3732 [1] LINK  
12. 533-2226 Y [1] VALVE GP-ACTUATOR (CONTROL)  
13. 562-6538 [1] BRACKET AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
14. 541-6725 I [1] HOSE AS  
15. 541-6723 I [1] HOSE AS  
16. 562-6027 [1] LINK  
17. 548-3079 [1] BRACKET AS  
18. 031-4155 [4] LOCKNUT (5/16-18-THD)  
19. 052-0741 [1] ELBOW  
20. 3J-7354 [1] SEAL-O-RING  
21. 4L-6454 [2] BOLT (3/8-16X1-IN)  
22. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
23. 4R-8686 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  171-6469 [1] ELBOW  
24. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 5P-5007 [1] REDUCER  
26. 5P-5008 [1] REDUCER  
27. 6V-3964 [2] WASHER-HARD (8.8X25.5X5-MM THK)  
28. 6V-8801 [2] NUT (3/8-16-THD)  
29. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
30. 6V-9163 [1] ROD END (BEARING)  
31. 7D-8793 [1] ELBOW-FLARED  
32. 7H-3641 [1] END-ROD (5/16-24-THD)  
33. 7X-2534 M [3] BOLT (M6X1X50-MM)  
34. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
35. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
36. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
37. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
39. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
40. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 9S-4182 [1] PLUG (7/16-20-THD)  
42. 9X-2027 [1] WASHER (11X18X2-MM THK)  
43. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog MD6310 :

ALARM GP
132-1829 ALARM GP
PUMP GP-WATER
355-7389 PUMP GP-WATER
PUMP GP-WATER
348-4037 PUMP GP-WATER
PLUG GP-WATER LINES
524-5318 PLUG GP-WATER LINES
PLUG GP-WATER LINES
361-4686 PLUG GP-WATER LINES
PLUG GP-WATER LINES
353-7271 PLUG GP-WATER LINES
PLUG GP-WATER LINES
350-3430 PLUG GP-WATER LINES
PLUG GP-WATER LINES
346-0676 PLUG GP-WATER LINES
ALTERNATOR GP-CHARGING
518-4178 ALTERNATOR GP-CHARGING
BOX GP-CONTROL
520-1593 BOX GP-CONTROL
BOX GP-CONTROL
524-7030 BOX GP-CONTROL
BOX GP-ELECTRONIC
503-7773 BOX GP-ELECTRONIC
BOX GP-TERMINAL
529-7694 BOX GP-TERMINAL
CABINET GP-INVERTER
525-3032 CABINET GP-INVERTER
CONTROL & MOUNTING GP
528-4940 CONTROL & MOUNTING GP
CONTROL & MOUNTING GP
547-7386 CONTROL & MOUNTING GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.