AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

386-2124 HYDRAULIC AR S/N 2T21-UP PART OF 376-5210 COMMON AR 824K WHEEL DOZER


HYDRAULIC SYSTEM
HYDRAULIC GP
LINES GP-HYDRAULIC
LINES GP-CYLINDER
MOTOR GP

WHEEL DOZER 824K WHEEL DOZER 2T2
 824K Wheel Dozer 2T200001-UP (MACHINE) POWERED BY C15 Engine M0089583 824K 2T2   (2018)

HYDRAULIC SYSTEM

HYDRAULIC GP
386-2124 HYDRAULIC AR
386-2297 HYDRAULIC AR
386-2298 HYDRAULIC AR
 

#M00895830520
 

386-2124: HYDRAULIC AR

386-2124 HYDRAULIC AR
S/N 2T21-UP
PART OF 376-5210 COMMON AR
i05636006 M0089583
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  386-2131 Y [1] CONTROL GP-SERVICE BRAKE (FRONT)  
  386-2141 Y [1] CONTROL GP-SERVICE BRAKE (REAR)  
  386-2132 Y [1] CYLINDER & MTG GP-STEERING  
  386-2283 Y [1] FILTER & MTG GP-CASE DRAIN  
  386-2143 Y [1] LINES GP-AIR CONDITIONER  
  441-3333 Y [1] LINES GP-DIAGNOSTIC  
  386-2173 Y [1] LINES GP-GREASE (FRONT FRAME)  
  386-2183 Y [1] LINES GP-GREASE (REAR FRAME)  
  386-2193 Y [1] LINES GP-HEATER  
  386-2253 Y [1] LINES GP-HYDRAULIC  
  386-2203 Y [1] LINES GP-HYDRAULIC FAN  
  386-2293 Y [1] LINES GP-POWER TRAIN OIL  
  387-8833 Y [1] LINES GP-SECONDARY STEERING  
  387-8803 Y [1] LINES GP-TILT & TIP CYLINDER  
  386-2313 Y [1] LINES GP-TORQUE CONV COOLER  
  386-2130 Y [1] OIL CHANGE GP-HIGH SPEED  
  386-2134 Y [1] PUMP & MTG GP-HYDRAULIC (FAN)  
  386-2144 Y [1] PUMP & MTG GP-HYDRAULIC (IMPLEMENT)  
  115-7669 Y [1] PUMP & MTG GP-SECONDARY STEER (SECONDARY STEERING)  
  386-2164 Y [1] PUMP & MTG GP-STEERING & XMSN  
  386-2273 Y [1] STOP GP-STEERING  
  386-2135 Y [1] TANK & MTG GP-HYDRAULIC  
  386-2136 Y [1] VALVE & MTG GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#M00895830521
 

386-2297: HYDRAULIC AR

386-2297 HYDRAULIC AR
S/N 2T21-UP
PART OF 464-1117, 488-4052, 541-2964 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@386-2298@@@@@
i05660495 M0089583
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  386-2186 Y [1] VALVE & MTG GP-MAIN CONTROL  
  387-8839 Y [1] VALVE GP-ACCUMULATOR CHARGING  
  Y   SEPARATE ILLUSTRATION
 

#M00895830522
 

386-2298: HYDRAULIC AR

386-2298 HYDRAULIC AR -STANDARD
S/N 2T21-UP
CANNOT BE USED WITH @@@@@386-2297@@@@@
i05651491 M0089583
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  386-2186 Y [1] VALVE & MTG GP-MAIN CONTROL  
  387-8837 Y [1] VALVE GP-ACCUMULATOR CHARGING  
  Y   SEPARATE ILLUSTRATION
 

#M00895830523
 

386-2253: LINES GP-HYDRAULIC

386-2253 LINES GP-HYDRAULIC
S/N 2T21-UP
PART OF 386-2124 HYDRAULIC AR
i05934022 M0089583
3862253 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-0289 [1] ELBOW  
2. 8G-9560 [1] TUBE AS  
3. 9J-3866 [1] ADAPTER  
4. 197-3295 [2] FLANGE-HALF  
5. 453-4736 C [1] VALVE GP-CHECK  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
6. 364-7828 [2] TUBE AS  
7. 386-2129 [1] PLATE  
8. 386-2161 I [1] HOSE AS  
9. 386-2162 [1] TUBE AS  
10. 386-2179 I [1] HOSE AS  
11. 473-9881 [1] HOSE  
12. 386-2211 [1] PLATE AS  
13. 386-2214 [1] HOSE AS  
14. 386-2232 [1] HOSE  
15. 386-2241 [1] HOSE  
16. 386-2242 [1] HOSE  
17. 386-2264 [1] TUBE AS  
18. 386-2282 [1] TUBE AS  
19. 386-2290 I [1] HOSE AS  
20. 386-2291 I [1] HOSE AS  
21. 386-2292 [1] TUBE AS  
22. 387-8890 [1] HOSE AS  
23. 389-4203 [1] VALVE-BALL  
24. 441-3320 I [1] HOSE AS  
25. 032-8487 [1] ELBOW  
26. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
27. 127-4642 [1] FLANGE  
28. 144-0367 [6] CLAMP-HOSE  
29. 148-8381 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-5429 [1] ELBOW  
30. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
31. 150-4029 [1] TEE AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [2] SEAL-O-RING  
  6V-8780 [1] TEE  
32. 150-4049 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-4149 [1] ELBOW  
33. 159-1503 [1] CLAMP-HOSE  
34. 172-4621 [1] ADAPTER AS  
  6V-0301 [1] ADAPTER  
  7M-8485 [1] SEAL-O-RING  
35. 187-2120 [1] ELBOW AS  
  4J-5477 [1] SEAL-O-RING  
  8C-8408 [1] ELBOW  
36. 198-4776 [2] WASHER-HARD (8.8X20X8-MM THK)  
37. 1P-3704 [2] SEAL-RECTANGULAR  
38. 1P-3708 [1] SEAL-RECTANGULAR  
40. 3D-2824 [1] SEAL-O-RING  
41. 4D-7388 [2] CLIP (LOOP)  
42. 4J-0520 [3] SEAL-O-RING  
43. 4J-0522 [1] SEAL-O-RING  
44. 4J-0527 [1] SEAL-O-RING  
45. 4J-8998 [1] SEAL-O-RING  
46. 4S-4455 [1] CLIP  
47. 5P-9297 [3] CLIP (LOOP)  
48. 5P-9299 [1] CLIP (LOOP)  
49. 6J-2680 [3] SEAL-O-RING  
50. 6V-8397 [2] SEAL-O-RING  
51. 6V-8398 [1] SEAL-O-RING  
52. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
53. 7X-7729 [4] WASHER (11X25X3-MM THK)  
54. 8C-3206 [2] FLANGE-HALF  
55. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
56. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
57. 8T-4182 M [5] BOLT (M10X1.5X45-MM)  
58. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
59. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
60. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
61. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
62. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
63. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
64. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
65. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
66. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
67. 8T-4983 [2] CLAMP-HOSE  
68. 8T-4984 [2] CLAMP-HOSE  
69. 8T-5005 M [6] BOLT (M10X1.5X70-MM)  
70. 282-2270 C [1] STRAINER-FUEL  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00895830524
 

386-2203: LINES GP-HYDRAULIC FAN

386-2203 LINES GP-HYDRAULIC FAN
S/N 2T21-UP
PART OF 386-2124 HYDRAULIC AR
i05682989 M0089583
3862203 LINES GP-HYDRAULIC FAN Parts scheme 3862203 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6722 Y [1] VALVE GP-CHECK  
2. 175-9494 [1] ADAPTER AS  
3. 193-9131 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 261-2286 [1] BRACKET AS  
5. 313-5299 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
6. 386-2310 [3] BRACKET  
7. 395-8723 [1] TEE AS  
  6V-9746 [1] SEAL-O-RING  
  426-4098 [1] ADAPTER-TEE  
8. 415-2930 I [1] HOSE AS  
9. 416-5471 I [1] HOSE AS  
10. 418-0529 I [1] HOSE AS  
11. 418-1370 I [1] HOSE AS  
12. 418-1371 I [1] HOSE AS  
13. 418-1376 I [1] HOSE AS  
14. 418-1378 I [1] HOSE AS  
15. 418-1379 I [1] HOSE AS  
16. 419-8945 [1] BRACKET  
17. 422-0073 I [1] HOSE AS  
18. 441-3304 [1] TUBE AS  
19. 441-3305 I [1] HOSE AS  
20. 441-3306 I [1] HOSE AS  
21. 441-3307 I [1] HOSE AS  
22. 441-3352 I [1] HOSE AS  
23. 107-8265 [1] TEE AS-SWIVEL  
  6V-9746 [1] SEAL-O-RING  
  9X-2289 [1] TEE-SWIVEL  
24. 133-6934 [3] SPACER (11X20X25-MM THK)  
25. 148-8307 [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  5P-8874 [1] ADAPTER  
26. 148-8315 [2] CONNECTOR AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  6V-8642 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
27. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
28. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
29. 148-8376 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8983 [1] ELBOW  
  6V-9746 [2] SEAL-O-RING  
30. 148-8392 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
31. 148-8449 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-9746 [2] SEAL-O-RING  
  6V-9839 [1] TEE-SWIVEL  
32. 148-8455 [1] UNION AS  
  6V-8997 [1] UNION  
  6V-9746 [2] SEAL-O-RING  
33. 153-6259 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8777 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
34. 154-5232 [1] ADAPTER AS  
  3K-0360 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  112-9783 [1] ADAPTER  
35. 164-5590 [1] VALVE AS-FLUID SAMPLING  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
36. 164-6862 [2] TEE AS  
    (EACH INCLUDES)
  6V-9160 [1] TEE-FACE SEAL  
  6V-9746 [3] SEAL-O-RING  
37. 180-9286 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  3E-2345 [1] ADAPTER-TEE  
  6V-9746 [1] SEAL-O-RING  
38. 1P-4579 [4] FLANGE-HALF  
39. 1S-0994 [1] CLIP (LOOP)(LOOP)  
40. 2P-1293 [5] LOCKNUT (1-3/16-12-THD)  
41. 4J-0520 [1] SEAL-O-RING  
42. 4J-0524 [2] SEAL-O-RING  
43. 4S-1962 [8] CLIP (LOOP)(LOOP)  
44. 5D-0718 [1] CLIP (LOOP)  
45. 5P-7470 [1] CLIP (SLOT)  
46. 5P-7471 [1] CLIP (TAB)  
47. 5P-7703 [1] GROMMET (52-MM ID)  
48. 6D-4246 [2] CLIP (LOOP)(LOOP)  
49. 6V-0852 [1] CAP-DUST  
50. 6V-1889 [2] CLIP (LOOP)(LOOP)  
51. 6V-8398 [1] SEAL-O-RING  
52. 6V-8554 [1] NUT (13/16-16-THD)  
53. 6V-9746 [2] SEAL-O-RING  
54. 6V-9832 [2] CAP (ORFS)  
55. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
56. 7X-0531 [5] WASHER-HARD (31X52.5X6-MM THK)  
57. 7X-7729 [1] WASHER (11X25X3-MM THK)  
58. 8C-3206 [2] FLANGE-HALF  
59. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
60. 8C-6416 [1] FITTING  
61. 8T-4121 [26] WASHER-HARD (11X21X2.5-MM THK)  
62. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
63. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
64. 8T-4182 M [10] BOLT (M10X1.5X45-MM)  
65. 8T-4183 M [9] BOLT (M12X1.75X40-MM)  
66. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
67. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
68. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
69. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
70. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00895830525
 

386-2223: LINES GP-HYDRAULIC FAN

386-2223 LINES GP-HYDRAULIC FAN
S/N 2T21-UP
PART OF 381-5530 COOLING AR
i05627783 M0089583
3862223 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-8763 [2] BRACKET AS  
2. 192-5017 [1] BRACKET AS  
3. 399-0371 Y [1] MOTOR GP-PISTON (HYDRAULIC FAN)  
4. 417-6174 [1] PLATE  
5. 420-3435 I [1] HOSE AS  
6. 441-3309 I [2] HOSE AS  
7. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
8. 148-8390 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8626 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
9. 1S-0994 [1] CLIP (LOOP)  
10. 4J-0520 [2] SEAL-O-RING  
11. 4J-5267 [1] SEAL-O-RING  
12. 5P-7466 [2] CLIP (SLOT)  
13. 5P-7467 [2] CLIP (TAB)  
14. 5P-8112 [2] GROMMET  
15. 7X-0515 [1] WASHER-HARD (17X35X5-MM THK)  
16. 7X-7729 [2] WASHER (11X25X3-MM THK)  
17. 8C-3205 [2] FLANGE-HALF  
18. 8C-3206 [4] FLANGE-HALF  
19. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4132 M [1] NUT (M16X2-THD)  
21. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
22. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
23. 8T-4196 M [15] BOLT (M10X1.5X35-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00895830526
 

387-8793: LINES GP-LIFT CYLINDER

387-8793 LINES GP-LIFT CYLINDER
S/N 2T21-UP
PART OF 464-1117, 488-4052, 541-2964 DISTRIBUTION AR
i05645556 M0089583
3878793 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 419-8839 I [1] HOSE AS  
2. 419-8840 I [1] HOSE AS  
3. 148-8327 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
4. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
5. 7G-3832 [1] GROMMET  
6. 7G-3833 [1] CLIP (TAB)  
7. 7G-3834 [1] CLIP (SLOT)  
8. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
9. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00895830527
 

386-2284: LINES GP-TILT & TIP CYLINDER

386-2284 LINES GP-TILT & TIP CYLINDER
S/N 2T21-UP
PART OF 397-7884, 397-7900 BULLDOZER AR
i05660135 M0089583
3862284 LINES GP-TILT & TIP CYLINDER Parts scheme 3862284 LINES GP-TILT & TIP CYLINDER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-4056 [4] TUBE AS  
2. 118-0665 [2] GUARD  
3. 386-2305 I [1] HOSE AS  
4. 386-2306 I [1] HOSE AS  
5. 419-9819 I [4] HOSE AS  
6. 420-2889 I [1] HOSE AS  
7. 420-2890 I [1] HOSE AS  
8. 446-7482 [1] GUARD  
9. 446-7483 [1] GUARD  
10. 4J-5267 [16] SEAL-O-RING  
11. 4T-3981 [8] CLIP  
12. 5P-7466 [4] CLIP (SLOT)  
13. 5P-7467 [4] CLIP (TAB)  
14. 5P-8112 [4] GROMMET  
15. 7X-0515 [6] WASHER-HARD (17X35X5-MM THK)  
16. 7X-2553 M [6] BOLT (M16X2X40-MM)  
17. 7X-2559 M [4] BOLT (M16X2X160-MM)  
18. 8C-3205 [32] FLANGE-HALF  
19. 8T-4121 [80] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
21. 8T-4186 M [16] BOLT (M10X1.5X40-MM)  
22. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [48] BOLT (M10X1.5X35-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4244 M [2] NUT (M12X1.75-THD)  
26. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
27. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00895830528
 

387-8803: LINES GP-TILT & TIP CYLINDER

387-8803 LINES GP-TILT & TIP CYLINDER
S/N 2T21-UP
PART OF 386-2124 HYDRAULIC AR
i05683009 M0089583
3878803 LINES GP-TILT & TIP CYLINDER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 441-3324 [2] PLATE  
2. 441-3325 [1] TUBE AS  
3. 441-3326 [1] TUBE AS  
4. 441-3327 [1] TUBE AS  
5. 441-3328 [1] TUBE AS  
6. 091-0081 [4] SPACER (10.5X20X10-MM THK)  
7. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
8. 5P-8939 [4] GROMMET  
9. 8T-1889 [4] CLIP (SLOT)  
10. 8T-1890 [4] CLIP (TAB)  
11. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
13. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
14. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  M   METRIC PART
 

#M00895830529
 

399-0371: MOTOR GP-PISTON

399-0371 MOTOR GP-PISTON -HYDRAULIC FAN
S/N 2T21-UP
PART OF 386-2223 LINES GP-HYDRAULIC FAN
i05627831 M0089583
3990371 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-0248 [1] SEAL-OIL  
2. 9S-8006 [1] PLUG (7/8-14-THD)  
3. 2M-9780 [1] SEAL-O-RING  
4. 148-1240 [1] SWASHPLATE  
5. 313-2545 Y [1] ROTATING GP-PUMP (VIBRATORY)  
6. 127-9485 [1] SEAL-O-RING  
7. 095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
8. 8C-3110 [1] RING-RETAINING  
9. 9X-8979 [1] DOWEL  
10. 101-2862 [2] DOWEL  
11. 185-0263 [1] BEARING  
12. 185-0242 [1] PLATE  
13. 242-3377 [1] SHAFT-DRIVE  
14. 203-8609 [1] CUP-BEARING  
15. 148-1238 [1] SHIM (3-MM THK)  
16. 123-0698 [1] PLUG  
17. 197-2474 [1] VALVE AS  
18. 242-3374 [1] SLEEVE  
19. 105-3035 [1] CONE-BEARING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Systems Operation
Graphic Color Codes
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems

Caterpillar Parts SIS Catalog 824K :

FILTER GP-OIL
376-1286 FILTER GP-OIL
CYLINDER GP-BULLDOZER TILT
372-9999 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER LIFT
397-9390 CYLINDER GP-BULLDOZER LIFT
COOLER GP-HYDRAULIC OIL
381-5527 COOLER GP-HYDRAULIC OIL
ACCUMULATOR GP-PILOT OIL
200-0750 ACCUMULATOR GP-PILOT OIL
VALVE GP-BRAKE CONTROL
173-5898 VALVE GP-BRAKE CONTROL
VALVE GP-ACCUMULATOR CHARGING
451-2130 VALVE GP-ACCUMULATOR CHARGING
VALVE GP-ACCUMULATOR CHARGING
450-6071 VALVE GP-ACCUMULATOR CHARGING
386-2297 HYDRAULIC AR
386-2298 HYDRAULIC AR
LINES GP-HYDRAULIC
386-2253 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC FAN
386-2203 LINES GP-HYDRAULIC FAN
LINES GP-HYDRAULIC FAN
386-2223 LINES GP-HYDRAULIC FAN
LINES GP-LIFT CYLINDER
387-8793 LINES GP-LIFT CYLINDER
LINES GP-TILT & TIP CYLINDER
386-2284 LINES GP-TILT & TIP CYLINDER
LINES GP-TILT & TIP CYLINDER
387-8803 LINES GP-TILT & TIP CYLINDER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.