POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GPDRAIN GP
DRIVE GP
FILLER GP-POWER TRAIN OIL
FILTER GP
GAUGE GP-OIL LEVEL (DIPSTICK)
POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP#M00903370430
493-2483: DIFFERENTIAL & BEVEL GEAR GP
493-2483 DIFFERENTIAL & BEVEL GEAR GP
S/N 3T51-UP
PART OF 493-2486 AXLE GP-REAR
AN ATTACHMENT
S/N 3T51-UP
PART OF 493-2486 AXLE GP-REAR
AN ATTACHMENT
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [2] | CAP-DUST | |
| 2. | 9U-3045 | [1] | NUT-BEARING | |
| 3. | 030-0060 | [1] | CUP-BEARING | |
| 4. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(DIFFERENTIAL OIL) | |
| 5. | 486-5000 | [1] | NUT | |
| 6. | 297-3211 | [1] | LOCK-BEARING | |
| 7. | 304-3750 | [1] | NUT-ADJUSTING | |
| 8. | 314-3412 | [1] | LOCK-BEARING | |
| 9. | 385-1770 | [1] | HOUSING | |
| 10. | 417-0608 | [1] | SHROUD | |
| 11. | 417-0613 | [1] | SHROUD | |
| 12. | 435-7986 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 13. | 388-4917 | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 14. | 155-3624 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 15. | 485-9743 | [1] | WASHER-LOCK | |
| 16. | 486-4949 | [1] | GEAR SET-BEVEL | |
| 17. | 392-1740 Y | [1] | DIFFERENTIAL GP | |
| 18. | 502-5467 | [1] | RETAINER-SEAL | |
| 19. | 030-0061 | [1] | CONE-BEARING | |
| 20. | 110-6349 | [2] | FITTING AS (QUICK DISCONNECT) | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 21. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 22. | 164-4180 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| 23. | 165-4929 | [1] | PLUG AS-MAGNETIC (DIFFERENTIAL) | |
| 5P-4484 | [1] | PLUG-MAGNETIC | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 24. | 117-1801 | [4] | DOWEL | |
| 25. | 1J-2860 | [1] | CUP-BEARING | |
| 26. | 1J-4757 | [1] | CONE-BEARING | |
| 27. | 287-8326 | [30] | BOLT (1/2-20X1.625-IN) | |
| 28. | 2M-0849 | [30] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 29. | 3K-0360 | [1] | SEAL-O-RING | |
| 30. | 4K-6804 | [1] | SEAL-O-RING | |
| 31. | 5L-2031 | [1] | CUP-BEARING | |
| 32. | 5P-8247 | [10] | WASHER-HARD (17X32X3.5-MM THK) | |
| 33. | 6V-3950 | [1] | CONE-BEARING | |
| 34. | 178-3707 M | [10] | BOLT (M16X2X50-MM) | |
| 35. | 6V-8210 M | [2] | BOLT (M8X1.25X16-MM) | |
| 36. | 6V-8337 M | [3] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 37. | 6Y-2539 | [1] | CONE-BEARING | |
| 38. | 6Y-2540 | [1] | CUP-BEARING | |
| 39. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 40. | 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | |
| 41. | 8T-5091 M | [3] | BOLT (M8X1.25X20-MM) | |
| 42. | 9C-6041 | [1] | DOWEL | |
| 43. | 5L-4753 | [1] | RING-RETAINING | |
| 44. | 485-9742 | [1] | WASHER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00903370431
392-1740: DIFFERENTIAL GP
392-1740 DIFFERENTIAL GP
S/N 3T51-UP
PART OF 493-2481, 493-2482, 493-2483 DIFFERENTIAL & BEVEL GEAR GP
ALSO AN ATTACHMENT
S/N 3T51-UP
PART OF 493-2481, 493-2482, 493-2483 DIFFERENTIAL & BEVEL GEAR GP
ALSO AN ATTACHMENT
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-1274 | [1] | SPIDER | |
| 2. | 8R-1703 | [4] | PINION-DIFFERENTIAL BEVEL (10-TEETH) | |
| 3. | 8R-1704 | [1] | GEAR-DIFFERENTIAL BEVEL (16-TEETH) | |
| 4. | 135-2946 | [4] | BUSHING | |
| 5. | 148-7841 | [3] | SPRING | |
| 6. | 209-0229 | [1] | SEAL | |
| 7. | 209-0230 | [1] | SEAL | |
| 8. | 217-3680 | [4] | WASHER-THRUST | |
| 9. | 240-3668 | [9] | PLATE-SEPARATOR | |
| 10. | 240-3672 | [1] | PLATE-THRUST | |
| 11. | 279-4346 | [1] | BEARING AS-NEEDLE | |
| 453-2978 | [2] | RACE-THRUST BEARING | ||
| 453-2979 | [1] | BEARING-THRUST | ||
| 12. | 352-2346 | [2] | WASHER-THRUST | |
| 13. | 355-9789 | [1] | PISTON | |
| 14. | 385-1794 | [1] | CASE AS-DIFFERENTIAL | |
| 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-0162 M | [12] | BOLT (M12X1.75X160-MM) | ||
| 15. | 389-9731 | [1] | RING-THRUST | |
| 16. | 392-1744 | [9] | DISC-FRICTION | |
| 17. | 392-5536 | [1] | GEAR-DIFFERENTIAL (CLUTCH) | |
| 18. | 1S-9989 | [3] | DOWEL-REACTION | |
| 19. | 8K-1207 | [3] | DOWEL | |
| M | METRIC PART | |||
#M00903370432
430-3318: DRAIN GP-ECOLOGY
#M00903370433
299-2467: DRIVE GP-PUMP
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-2939 | [2] | SEAL-O-RING | |
| 2. | 7S-3036 | [2] | RING-SEAL | |
| 3. | 9W-1454 | [1] | COVER | |
| 4. | 102-4232 | [1] | BEARING AS-ROLLER | |
| 5. | 138-3114 | [2] | ADAPTER-PUMP | |
| 6. | 140-7544 B | [2] | SHIM PACK (INCLUDES 12-SHIMS) | |
| 7. | 299-2499 | [2] | GEAR-PUMP DRIVE (51-TEETH) | |
| 8. | 299-2498 | [1] | GEAR-IDLER (89/56-TEETH) | |
| 9. | 342-6341 | [1] | SHAFT-IDLER | |
| 10. | 6V-3551 | [1] | SEAL-O-RING | |
| 11. | 6V-7675 M | [1] | BOLT (M16X2X140-MM) | |
| 12. | 7K-5448 | [4] | CUP-BEARING | |
| 13. | 7K-5449 | [4] | CONE-BEARING | |
| 14. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 16. | 8T-4196 M | [16] | BOLT (M10X1.5X35-MM) | |
| 17. | 9X-8268 | [1] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00903370434
499-6218: FILLER GP-POWER TRAIN OIL
499-6218 FILLER GP-POWER TRAIN OIL
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 445-5342 | [1] | CAP-OIL FILLER (TRANSMISSION) | |
| 2. | 499-6219 | [1] | TUBE AS | |
| 3. | 148-8333 | [1] | CONNECTOR AS | |
| 6V-8400 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8T-7927 | [1] | CONNECTOR | ||
| 4. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 6. | 8S-0023 | [1] | CLIP (SLOT) | |
| 7. | 8S-0024 | [1] | CLIP (TAB) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 10. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00903370435
422-3863: FILTER GP-OIL
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-9780 | [1] | SEAL-O-RING | |
| 2. | 373-9231 | [1] | RING | |
| 3. | 212-5075 | [1] | SWITCH AS-PRESSURE (DIFFERENTIAL OIL) | |
| 3A. | 3J-1907 | [1] | SEAL-O-RING | |
| 3B. | 5F-9144 | [1] | SEAL-O-RING | |
| 9X-1813 E | SLEEVE (14-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 5. | 130-3212 | [1] | FILTER-OIL (ADVANCED EFFICIENCY) | |
| 6. | 187-8627 | [1] | BASE AS-HYDRAULIC | |
| E | ORDER BY THE CENTIMETER | |||
#M00903370436
505-5824: FILTER GP-OIL
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 428-8649 | [1] | HOUSING AS-FILTER | |
| 6V-5048 | [1] | SEAL-O-RING | ||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 095-1671 | [1] | SEAL-O-RING | ||
| 389-1088 | [1] | FILTER ELEMENT AS-OIL (HYDRAULIC, TRANSMISSION)(HYDRAULIC) | ||
| 2. | 440-0257 Y | [1] | SWITCH GP-PRESSURE (DIFFERENTIAL) | |
| 3. | 491-6682 | [1] | BASE AS-FILTER | |
| 6V-5048 | [1] | SEAL-O-RING | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00903370437
508-4533: FILTER GP-OIL
508-4533 FILTER GP-OIL -WITHOUT HOUSINGS
S/N 3T51-UP
PART OF 501-4368 LINES GP-TRANSMISSION OIL
S/N 3T51-UP
PART OF 501-4368 LINES GP-TRANSMISSION OIL
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 6V-0852 | [1] | CAP-DUST | |
| 3. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 4. | 164-5590 | [1] | VALVE AS-FLUID SAMPLING | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 5. | 315-9835 | [1] | ELBOW AS | |
| 6V-0484 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 6. | 505-5824 Y | [1] | FILTER GP-OIL (RH) | |
| 7. | 507-3617 | [1] | BRACKET AS | |
| 8. | 507-5881 I | [1] | HOSE AS | |
| 9. | 507-5882 I | [1] | HOSE AS | |
| 10. | 148-8391 | [1] | ELBOW AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 8T-8987 | [1] | ELBOW | ||
| 11. | 162-6802 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 151-5145 | [1] | ELBOW | ||
| 12. | 164-5662 | [1] | ELBOW AS | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 143-4281 | [1] | ELBOW | ||
| 13. | 4P-8134 | [1] | CLIP (LADDER) | |
| 14. | 8C-3447 | [1] | CAP-DUST | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00903370438
507-8402: GAUGE GP-OIL LEVEL (DIPSTICK)
507-8402 GAUGE GP-OIL LEVEL (DIPSTICK) -TRANSMISSION
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
Type 1
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
Type 1
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6U-0456 | [1] | STRAP | |
| 2. | 290-5562 | [1] | MOUNT (DUAL SWIVEL) | |
| 3. | 436-2023 | [1] | TUBE AS | |
| 4. | 436-2031 | [1] | RETAINER | |
| 5. | 447-2931 | [1] | GAUGE AS (OIL LEVEL) | |
| 6. | 508-2501 | [1] | BRACKET AS | |
| 7. | 533-0533 | [1] | BRACKET AS | |
| 8. | 539-2134 | [1] | BRACKET AS | |
| 9. | 539-2137 | [1] | BRACKET AS | |
| 10. | 238-5085 | [1] | SEAL-O-RING | |
| 11. | 3U-2752 | [1] | CLIP (LOOP) | |
| 12. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 13. | 6U-0455 | [1] | STRAP | |
| 14. | 8J-1256 | [4] | CLIP (LOOP) | |
| 15. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 22. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00903370439
507-8402: GAUGE GP-OIL LEVEL (DIPSTICK)
507-8402 GAUGE GP-OIL LEVEL (DIPSTICK) -TRANSMISSION
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
Type 2
S/N 3T51-UP
PART OF 486-4319 POWER TRAIN AR
Type 2
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6U-0456 | [1] | STRAP | |
| 2. | 290-5562 | [1] | MOUNT (DUAL SWIVEL) | |
| 3. | 436-2023 | [1] | TUBE AS | |
| 4. | 436-2031 | [1] | RETAINER | |
| 5. | 447-2931 | [1] | GAUGE AS (OIL LEVEL) | |
| 9M-1096 | [1] | RIVET | ||
| 6. | 508-2501 | [1] | BRACKET AS | |
| 7. | 533-0533 | [1] | BRACKET AS | |
| 8. | 563-4950 C | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 9. | 563-1098 C | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 10. | 238-5085 | [1] | SEAL-O-RING | |
| 11. | 3U-2752 | [1] | CLIP (LOOP) | |
| 12. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 13. | 6U-0455 | [1] | STRAP | |
| 14. | 8J-1256 | [4] | CLIP (LOOP) | |
| 15. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 22. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
Information:
POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP
Operation and Maintenance Manual
Specifications
Systems Operation
Reuse And Salvage Guidelines
Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}
Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}
Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Differential and Bevel Gear (Front and Rear) - Remove and Install
730 & 735 Articulated Truck Power Train
730 & 735 Articulated Truck Power Train