HYDRAULIC SYSTEM
TANK GPVALVE & LINKAGE GP
HYDRAULIC SYSTEM
TANK GP
#M00951730610
519-6940: TANK GP-HYDRAULIC
519-6940 TANK GP-HYDRAULIC
S/N N941-UP
FILTER
PART OF 515-2579 TANK & MTG GP-HYDRAULIC
S/N N941-UP
FILTER
PART OF 515-2579 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 2. | 1L-5072 | [1] | DOWEL | |
| 3. | 1R-0774 | [1] | FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY) | |
| 4. | 2D-4202 | [1] | PLATE | |
| 5. | 2J-7761 | [1] | RING-RETAINING | |
| 6. | 3F-1547 | [1] | SEAL-O-RING | |
| 7. | 3G-0361 | [1] | GASKET | |
| 8. | 4M-6921 | [1] | WASHER-SPRING | |
| 9. | 5D-1911 | [1] | COVER-HYDRAULIC CAP | |
| 10. | 7D-1195 | [1] | SEAL-O-RING | |
| 11. | 7H-1447 | [1] | CAP-FILLER (HYDRAULIC TANK FILL) | |
| 12. | 8T-0389 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 13. | 8T-2275 | [1] | BALL | |
| 14. | 9H-6454 | [1] | GASKET (HYDRAULIC TANK) | |
| 15. | 9J-1979 | [1] | RETAINER AS | |
| 16. | 9J-3047 | [1] | STRAINER | |
| 17. | 9M-7394 | [1] | LEVER (FILL CAP) | |
| 18. | 086-0507 | [1] | PIN | |
| 19. | 141-9661 | [1] | SPACER (20X128X6-MM THK) | |
| 20. | 217-2661 | [1] | GAUGE-SIGHT | |
| 114-4231 | [2] | BOLT-MOUNTING | ||
| 21. | 226-2870 | [1] | CAP AS (HYDRAULIC TANK) | |
| 22. | 3B-4611 | [1] | PIN-COTTER | |
| 23. | 4B-2913 | [1] | PIN-CLEVIS | |
| 24. | 519-6939 | [1] | TANK AS-HYDRAULIC | |
| 6B-6684 | [2] | NUT-FULL (1/2-20-THD) | ||
| 9R-2821 M | [3] | BOSS (M10X1.5X15-MM) | ||
| 25. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#M00951730611
342-2154: VALVE & LINKAGE GP
342-2154 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N N941-UP
PART OF 524-8998 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8998 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-3032 CY | [1] | VALVE GP-BANK 4 (RH) | |
| 2. | 6E-3038 CY | [1] | VALVE GP-BANK 4 (LH) | |
| 3. | 490-1143 | [2] | RETAINER | |
| 4. | 490-1103 C | [1] | LEVER (ARTICULATION) | |
| 5. | 490-1104 C | [1] | LEVER (BLADE LIFT, LH) | |
| 5A. | 490-1104 C | [1] | LEVER (CENTERSHIFT) | |
| 6. | 490-1110 CY | [8] | ROD AS-ADJUSTING | |
| 7. | 490-1105 C | [1] | LEVER (SIDESHIFT) | |
| 7A. | 490-1105 C | [1] | LEVER (WHEEL LEAN) | |
| 8. | 490-1107 C | [1] | LEVER (BLADE TIP) | |
| 9. | 512-5977 C | [2] | SPACER | |
| 10. | 8D-5640 | [10] | BEARING | |
| 11. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 12. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 13. | 6L-1962 | [8] | NUT-JAM (3/8-24-THD) | |
| 14. | 8T-9043 | [16] | BOLT (5/16-18X0.875-IN) | |
| 15. | 3F-9556 | [16] | LOCKWASHER | |
| 16. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| 17. | 8D-5641 | [8] | BEARING | |
| 18. | 2G-6757 | [1] | KNOB-BLADE LIFT (LH) | |
| 19. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 20. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 21. | 2G-6747 | [1] | KNOB-BLADE TIP | |
| 22. | 490-1106 C | [1] | LEVER (CIRCLE DRIVE) | |
| 22A. | 490-1106 C | [1] | LEVER (BLADE LIFT, RH) | |
| 23. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 24. | 2G-6748 | [1] | KNOB-BLADE LIFT (RH) | |
| 25. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 26. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 27. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 28. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 9M-1853 | [6] | MOUNTING | |
| 30. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 31. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 32. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 33. | 104-7429 | [2] | PLATE | |
| 34. | 137-4516 | [1] | SHAFT | |
| 35. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 36. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 37. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 38. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730612
434-6587: VALVE & LINKAGE GP
434-6587 VALVE & LINKAGE GP -RIPPER
S/N N941-UP
PART OF 524-8989 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8989 CONTROL AR-HYDRAULIC
For full view, you need register
#M00951730613
434-6596: VALVE & LINKAGE GP
For full view, you need register
#M00951730614
490-1163: VALVE & LINKAGE GP
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6747 | [1] | KNOB-BLADE TIP | |
| 3. | 2G-6748 | [1] | KNOB-BLADE LIFT | |
| 4. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 5. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 6. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 7. | 2G-6754 | [1] | KNOB (BULLDOZER LIFT, PLOW) | |
| 8. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 9. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 10. | 2G-6757 | [1] | KNOB-BLADE LIFT | |
| 11. | 2G-7107 | [1] | KNOB-WING LIFT | |
| 12. | 2G-7108 | [1] | KNOB-WING TILT | |
| 13. | 8D-5636 B | [2] | SHIM (0.254-MM THK) | |
| 14. | 8D-5637 B | [2] | SHIM (0.762-MM THK) | |
| 15. | 8D-5640 | [15] | BEARING | |
| 16. | 8W-0456 | [4] | SHAFT | |
| 17. | 112-9164 | [5] | BOOT | |
| 18. | 117-0472 | [1] | KNOB (DOZER ANGLE, SNOW PLOW) | |
| 19. | 490-1103 | [2] | LEVER | |
| 20. | 490-1104 | [2] | LEVER | |
| 21. | 490-1105 | [2] | LEVER | |
| 22. | 490-1106 | [2] | LEVER | |
| 23. | 490-1107 | [3] | LEVER | |
| 24. | 490-1108 | [2] | RETAINER | |
| 25. | 490-1110 Y | [13] | ROD AS-ADJUSTING | |
| 26. | 490-1151 | [2] | LEVER | |
| 27. | 512-5977 | [2] | SPACER | |
| 28. | 137-4516 | [1] | SHAFT | |
| 29. | 3F-9556 | [26] | LOCKWASHER | |
| 30. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 31. | 6L-1962 | [13] | NUT-JAM (3/8-24-THD) | |
| 32. | 7X-0291 | [2] | BOLT (3/8-16X3.75-IN) | |
| 33. | 8D-5641 | [13] | BEARING | |
| 34. | 8T-9043 | [26] | BOLT (5/16-18X0.875-IN) | |
| 35. | 9X-2027 | [1] | WASHER (11X18X2-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730615
524-4402: VALVE & LINKAGE GP
524-4402 VALVE & LINKAGE GP -FRONT LIFT, RIPPER, WING MAST, WING TILT
S/N N941-UP
PART OF 524-8994 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8994 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6747 | [1] | KNOB-BLADE TIP | |
| 3. | 2G-6748 | [1] | KNOB-BLADE LIFT (RH) | |
| 4. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 5. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 6. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 7. | 2G-6754 | [1] | KNOB (BULLDOZER LIFT, PLOW) | |
| 8. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 9. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 10. | 2G-6757 | [1] | KNOB-BLADE LIFT (LH) | |
| 11. | 2G-7107 | [1] | KNOB-WING LIFT | |
| 12. | 2G-7108 | [1] | KNOB-WING TILT | |
| 13. | 6L-1962 | [12] | NUT-JAM (3/8-24-THD) | |
| 14. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 15. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 16. | 8D-5640 | [14] | BEARING | |
| 17. | 8W-0456 | [3] | SHAFT | |
| 18. | 9M-1853 | [6] | MOUNTING | |
| 19. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 20. | 104-7429 | [2] | PLATE | |
| 21. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 22. | 104-8671 Y | [1] | VALVE GP-BANK 5 (RH) | |
| 23. | 112-9164 | [4] | BOOT | |
| 24. | 490-1103 | [1] | LEVER (RIPPER) | |
| 24A. | 490-1103 | [1] | LEVER (ARTICULATION) | |
| 25. | 490-1104 | [1] | LEVER (BLADE LIFT) | |
| 25A. | 490-1104 | [1] | LEVER (CENTERSHIFT) | |
| 26. | 490-1105 | [1] | LEVER (SIDESHIFT) | |
| 26A. | 490-1105 | [1] | LEVER (WHEEL LEAN) | |
| 27. | 490-1106 | [1] | LEVER (CIRCLE DRIVE) | |
| 27A. | 490-1106 | [1] | LEVER (BLADE LIFT) | |
| 28. | 490-1107 | [1] | LEVER (WING LIFT) | |
| 28A. | 490-1107 | [1] | LEVER (BLADE TIP) | |
| 28B. | 490-1107 | [1] | LEVER (BULLDOZER, PLOW) | |
| 29. | 490-1108 | [2] | RETAINER | |
| 30. | 490-1110 Y | [12] | ROD AS-ADJUSTING | |
| 31. | 490-1151 | [1] | LEVER (WING TILT) | |
| 32. | 511-0964 Y | [1] | VALVE GP-BANK 7 (LH) | |
| 33. | 512-5977 | [2] | SPACER | |
| 34. | 137-4516 | [1] | SHAFT | |
| 35. | 3F-9556 | [24] | LOCKWASHER | |
| 36. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 37. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 38. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 39. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 40. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 41. | 7X-0291 | [2] | BOLT (3/8-16X3.75-IN) | |
| 42. | 8D-5641 | [12] | BEARING | |
| 43. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 44. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 45. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 47. | 8T-9043 | [24] | BOLT (5/16-18X0.875-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730616
524-4404: VALVE & LINKAGE GP
524-4404 VALVE & LINKAGE GP -FRONT LIFT, RIPPER, WING MAST, WING TILT
S/N N941-UP
PART OF 524-8995 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8995 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 3. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 4. | 2G-6754 | [1] | KNOB (BULLDOZER LIFT, PLOW) | |
| 5. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 6. | 2G-7107 | [1] | KNOB-WING LIFT | |
| 7. | 2G-7108 | [1] | KNOB-WING TILT | |
| 8. | 6L-1962 | [12] | NUT-JAM (3/8-24-THD) | |
| 9. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 10. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 11. | 8D-5640 | [14] | BEARING | |
| 12. | 8W-0456 | [3] | SHAFT | |
| 13. | 9M-1853 | [6] | MOUNTING | |
| 14. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 15. | 104-7429 | [2] | PLATE | |
| 16. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 17. | 112-9164 | [4] | BOOT | |
| 18. | 250-0548 Y | [1] | VALVE GP-BANK 5 (RH) | |
| 19. | 250-0571 Y | [1] | VALVE GP-BANK 7 (LH) | |
| 20. | 490-1103 | [1] | LEVER (RIPPER) | |
| 20A. | 490-1103 | [1] | LEVER (ARTICULATION) | |
| 21. | 490-1104 | [1] | LEVER (BLADE LIFT) | |
| 21A. | 490-1104 | [1] | LEVER (CENTERSHIFT) | |
| 22. | 490-1105 | [1] | LEVER (SIDESHIFT) | |
| 22A. | 490-1105 | [1] | LEVER (WHEEL LEAN) | |
| 23. | 490-1106 | [1] | LEVER (CIRCLE DRIVE) | |
| 23A. | 490-1106 | [1] | LEVER (BLADE LIFT) | |
| 24. | 490-1107 | [1] | LEVER (WING LIFT) | |
| 24A. | 490-1107 | [1] | LEVER (BLADE TIP) | |
| 24B. | 490-1107 | [1] | LEVER (BULLDOZER, PLOW) | |
| 25. | 490-1108 | [2] | RETAINER | |
| 26. | 490-1110 Y | [12] | ROD AS-ADJUSTING | |
| 27. | 490-1151 | [1] | LEVER (WING TILT) | |
| 28. | 512-5977 | [2] | SPACER | |
| 29. | 137-4516 | [1] | SHAFT | |
| 30. | 3F-9556 | [24] | LOCKWASHER | |
| 31. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 32. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 33. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 34. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 35. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 36. | 7X-0291 | [2] | BOLT (3/8-16X3.75-IN) | |
| 37. | 8D-5641 | [12] | BEARING | |
| 38. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 39. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 41. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-9043 | [24] | BOLT (5/16-18X0.875-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730617
526-7454: VALVE & LINKAGE GP
526-7454 VALVE & LINKAGE GP -RIPPER
S/N N941-UP
PART OF 524-8990 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8990 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 3. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 4. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 5. | 6L-1962 | [9] | NUT-JAM (3/8-24-THD) | |
| 6. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 7. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 8. | 8D-5640 | [11] | BEARING | |
| 9. | 9M-1853 | [6] | MOUNTING | |
| 10. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 11. | 104-7429 | [2] | PLATE | |
| 12. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 13. | 112-9164 | [1] | BOOT | |
| 14. | 250-0544 Y | [1] | VALVE GP-BANK 4 (RH) | |
| 15. | 250-0550 Y | [1] | VALVE GP-BANK 5 (LH) | |
| 16. | 490-1103 | [1] | LEVER (ARTICULATION) | |
| 16A. | 490-1103 | [1] | LEVER (RIPPER) | |
| 17. | 490-1104 | [1] | LEVER (BLADE LIFT, LH) | |
| 17A. | 490-1104 | [1] | LEVER (CENTERSHIFT) | |
| 18. | 490-1105 | [1] | LEVER (WHEEL LEAN) | |
| 18A. | 490-1105 | [1] | LEVER (SIDESHIFT) | |
| 19. | 490-1106 | [1] | LEVER (BLADE LIFT, RH) | |
| 19A. | 490-1106 | [1] | LEVER (CIRCLE DRIVE) | |
| 20. | 490-1107 | [1] | LEVER (BLADE TIP) | |
| 21. | 490-1108 | [2] | RETAINER | |
| 22. | 490-1110 Y | [9] | ROD AS-ADJUSTING | |
| 23. | 512-5977 | [2] | SPACER | |
| 24. | 137-4516 | [1] | SHAFT | |
| 25. | 3F-9556 | [18] | LOCKWASHER | |
| 26. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 27. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 28. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 29. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 30. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 31. | 8D-5641 | [9] | BEARING | |
| 32. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 33. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 35. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 36. | 8T-9043 | [18] | BOLT (5/16-18X0.875-IN) | |
| 37. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730618
527-6081: VALVE & LINKAGE GP
527-6081 VALVE & LINKAGE GP -FRONT LIFT, RIPPER
S/N N941-UP
PART OF 524-8991 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8991 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6747 | [1] | KNOB-BLADE TIP | |
| 3. | 2G-6748 | [1] | KNOB-BLADE LIFT | |
| 4. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 5. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 6. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 7. | 2G-6754 | [1] | KNOB (BULLDOZER LIFT, PLOW) | |
| 8. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 9. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 10. | 2G-6757 | [1] | KNOB-BLADE LIFT | |
| 11. | 6L-1962 | [10] | NUT-JAM (3/8-24-THD) | |
| 12. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 13. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 14. | 8D-5640 | [12] | BEARING | |
| 15. | 8W-0456 | [1] | SHAFT | |
| 16. | 9M-1853 | [6] | MOUNTING | |
| 17. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 18. | 104-7429 | [2] | PLATE | |
| 19. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 20. | 104-8645 Y | [1] | VALVE GP-BANK 5 (LH) | |
| 21. | 104-8671 Y | [1] | VALVE GP-BANK 5 (RH) | |
| 22. | 112-9164 | [2] | BOOT | |
| 23. | 490-1103 | [1] | LEVER (ARTICULATION) | |
| 23A. | 490-1103 | [1] | LEVER (RIPPER) | |
| 24. | 490-1104 | [1] | LEVER (CENTERSHIFT) | |
| 24A. | 490-1104 | [1] | LEVER (BLADE LIFT, LH) | |
| 25. | 490-1105 | [1] | LEVER (WHEEL LEAN) | |
| 25A. | 490-1105 | [1] | LEVER (SIDESHIFT) | |
| 26. | 490-1106 | [1] | LEVER (BLADE LIFT, RH) | |
| 26A. | 490-1106 | [1] | LEVER (CIRCLE DRIVE) | |
| 27. | 490-1107 | [1] | LEVER (BULLDOZER, PLOW) | |
| 27A. | 490-1107 | [1] | LEVER (BLADE TIP) | |
| 28. | 490-1108 | [2] | RETAINER | |
| 29. | 490-1110 Y | [10] | ROD AS-ADJUSTING | |
| 30. | 512-5977 | [2] | SPACER | |
| 31. | 137-4516 | [1] | SHAFT | |
| 32. | 3F-9556 | [20] | LOCKWASHER | |
| 33. | 4L-6459 | [1] | BOLT (3/8-16X2.5-IN) | |
| 34. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 35. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 36. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 37. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 38. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 39. | 8D-5641 | [10] | BEARING | |
| 40. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 41. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 42. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 44. | 8T-9043 | [20] | BOLT (5/16-18X0.875-IN) | |
| 45. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730619
527-6082: VALVE & LINKAGE GP
527-6082 VALVE & LINKAGE GP -FRONT LIFT, RIPPER, SCARIFIER
S/N N941-UP
PART OF 524-8992 CONTROL AR-HYDRAULIC
S/N N941-UP
PART OF 524-8992 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6740 | [1] | KNOB-RIPPER | |
| 2. | 2G-6747 | [1] | KNOB-BLADE TIP | |
| 3. | 2G-6748 | [1] | KNOB-BLADE LIFT | |
| 4. | 2G-6749 | [1] | KNOB-SIDESHIFT | |
| 5. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 6. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 7. | 2G-6753 | [1] | KNOB-SCARIFIER | |
| 8. | 2G-6754 | [1] | KNOB (BULLDOZER LIFT, PLOW) | |
| 9. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 10. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 11. | 2G-6757 | [1] | KNOB-BLADE LIFT | |
| 12. | 4Z-6192 Y | [1] | VALVE GP-BANK 6 (RH) | |
| 13. | 6L-1962 | [11] | NUT-JAM (3/8-24-THD) | |
| 14. | 8D-5636 B | [10] | SHIM (0.254-MM THK) | |
| 15. | 8D-5637 B | [10] | SHIM (0.762-MM THK) | |
| 16. | 8D-5640 | [13] | BEARING | |
| 17. | 8W-0456 | [2] | SHAFT | |
| 18. | 9M-1853 | [6] | MOUNTING | |
| 19. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 20. | 104-7429 | [2] | PLATE | |
| 21. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 22. | 104-8645 Y | [1] | VALVE GP-BANK 5 (LH) | |
| 23. | 112-9164 | [3] | BOOT | |
| 24. | 490-1103 | [1] | LEVER (ARTICULATION) | |
| 24A. | 490-1103 | [1] | LEVER (RIPPER) | |
| 25. | 490-1104 | [1] | LEVER (CENTERSHIFT) | |
| 25A. | 490-1104 | [1] | LEVER (BLADE LIFT, LH) | |
| 26. | 490-1105 | [1] | LEVER (WHEEL LEAN) | |
| 26A. | 490-1105 | [1] | LEVER (SIDESHIFT) | |
| 27. | 490-1106 | [1] | LEVER (BLADE LIFT, RH) | |
| 27A. | 490-1106 | [1] | LEVER (CIRCLE DRIVE) | |
| 28. | 490-1107 | [1] | LEVER (SCARIFIER) | |
| 28A. | 490-1107 | [1] | LEVER (BLADE TIP) | |
| 29. | 490-1108 | [2] | RETAINER | |
| 30. | 490-1110 Y | [11] | ROD AS-ADJUSTING | |
| 31. | 490-1151 | [1] | LEVER (BULLDOZER, PLOW) | |
| 32. | 512-5977 | [2] | SPACER | |
| 33. | 137-4516 | [1] | SHAFT | |
| 34. | 3F-9556 | [22] | LOCKWASHER | |
| 35. | 4L-6459 | [2] | BOLT (3/8-16X2.5-IN) | |
| 36. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 37. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 38. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 39. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 40. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 41. | 8D-5641 | [11] | BEARING | |
| 42. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 43. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 45. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 46. | 8T-9043 | [22] | BOLT (5/16-18X0.875-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
