AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

513-2194 CYLINDER GP-TILT S/N LNC1-UP; HMH1-UP; D5M1-UP 140-MM (5.5-IN) BORE X 209-MM (8.2-IN) STROKE. BULLDOZER PART OF 538-1329 INSTALLATION AR-BULLDOZER AN ATTACHMENT D6


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-CYLINDER
LINES GP-HYDRAULIC FAN
LINES GP-CYLINDER
LINES GP-PILOT
LINES GP-PUMP
LINES GP-RETURN

TRACK-TYPE TRACTOR D6 TRACK-TYPE TRACTOR D5M
 D6T Track-Type Tractor XL VPAT, XE; XW VPAT, XE; LGP VPAT, XE D5M00001-UP (MACHINE) POWERED BY C9.3 Engine M0096317 D6 D5M   (2018)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-ANGLING
555-8737 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
555-8742 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
508-3812 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
476-3369 CYLINDER GP-RIPPER
CYLINDER GP-TILT
513-2194 CYLINDER GP-TILT
MOUNTING GP-CYLINDER
562-1254 MOUNTING GP-CYLINDER
PIN GP-CYLINDER
473-3140 PIN GP-CYLINDER
 

#M00963170600
 

513-2194: CYLINDER GP-TILT

513-2194 CYLINDER GP-TILT
S/N LNC1-UP; HMH1-UP; D5M1-UP
140-MM (5.5-IN) BORE X 209-MM (8.2-IN) STROKE. BULLDOZER
PART OF 538-1329 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i07509704 M0096317
5132194 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-9247 [1] SEAL-O-RING  
2. 2K-2961 [1] RING-BACKUP  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 4J-4606 [1] RING-WEAR  
5. 8F-9516 [1] SEAL-O-RING  
6. 146-0742 [1] RING-WEAR  
7. 167-2204 [1] SEAL AS-BUFFER  
8. 167-2314 [1] SEAL-U-CUP  
9. 227-1148 [1] SEAL-WIPER  
10. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
11. 475-5567 [1] PISTON  
12. 475-5574 [1] HEAD  
13. 495-8209 [1] SEAL AS  
14. 513-2195 [1] CYLINDER AS-TILT  
  160-0305 [1] BEARING  
  8T-7567 [2] RING-RETAINING (INTERNAL)  
  6E-1497 [1] BOSS  
15. 513-2196 [1] ROD AS  
  160-0305 [1] BEARING  
  8T-7567 [2] RING-RETAINING (INTERNAL)  
  M   METRIC PART
 

#M00963170601
 

460-4455: HYDRAULIC AR

460-4455 HYDRAULIC AR
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 464-5507 CONFIGURATION AR
AN ATTACHMENT
i07478270 M0096317
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  229-5421 Y [1] ADAPTER GP-MOTOR  
  460-4375 Y [1] LINES GP-ANGLE & TILT  
  460-4445 Y [1] LINES GP-HYDRAULIC FAN  
  460-4435 Y [1] LINES GP-LIFT CYLINDER  
  460-4450 Y [1] LINES GP-PILOT  
  460-4475 Y [1] LINES GP-PUMP  
  460-4465 Y [1] LINES GP-STEERING  
  460-4355 Y [1] LINES GP-TILT CYLINDER  
  468-3835 Y [1] MOTOR GP-PISTON (STEERING)  
  460-4345 Y [1] PUMP & MOUNTING GP (IMPLEMENT, HYDRAULIC FAN)  
  460-4415 Y [1] PUMP & MOUNTING GP (STEERING)  
  460-4420 Y [1] TANK & MTG GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#M00963170602
 

460-4375: LINES GP-ANGLE & TILT

460-4375 LINES GP-ANGLE & TILT
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 460-4455 HYDRAULIC AR
AN ATTACHMENT
i07478299 M0096317
4604375 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8575 [2] BOLT AS  
2. 164-5577 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [2] SEAL-O-RING  
  6V-8984 [1] ELBOW  
3. 4J-0520 [2] SEAL-O-RING  
4. 533-4159 [8] BOLT AS  
5. 546-1018 I [1] HOSE AS  
6. 546-1019 I [1] HOSE AS  
7. 6V-9172 [2] NUT (1-7/16-12-THD)  
8. 6V-9833 [2] CAP  
9. 7G-3832 [1] GROMMET  
10. 7G-3833 [1] CLIP (TAB)  
11. 7G-3834 [1] CLIP (SLOT)  
12. 8C-3206 [4] FLANGE-HALF  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#M00963170603
 

473-3160: LINES GP-ANGLE & TILT

473-3160 LINES GP-ANGLE & TILT
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 538-1329 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i07509685 M0096317
4733160 LINES GP-ANGLE & TILT Parts scheme 4733160 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9746 [8] SEAL-O-RING  
2. 7G-3832 [6] GROMMET  
3. 7G-3833 [6] CLIP (TAB)  
4. 7G-3834 [6] CLIP (SLOT)  
5. 7X-7729 [26] WASHER (11X25X3-MM THK)  
6. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [16] BOLT (M10X1.5X20-MM)  
8. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
9. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
10. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
11. 8T-4196 M [22] BOLT (M10X1.5X35-MM)  
12. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
14. 9X-2027 [32] WASHER (11X18X2-MM THK)  
15. 135-8573 [8] BOLT AS  
16. 135-8577 [4] BOLT AS  
17. 148-8327 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
18. 344-5675 M [2] NUT (M10X1.5-THD)  
19. 434-0776 M [16] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
20. 473-3199 [2] COVER  
21. 479-2171 [10] BOLT AS  
22. 479-2172 [4] BOLT AS  
23. 488-3971 [18] BOLT AS  
24. 488-3974 [6] BOLT AS  
25. 513-2910 [2] COVER  
26. 525-1051 [1] FILM-IDENTIFICATION (LUBRICATION POINTS)  
27. 533-4159 [32] BOLT AS  
28. 556-0647 [2] TUBE AS  
29. 557-0498 I [1] HOSE AS  
30. 4J-5267 [15] SEAL-O-RING  
31. 538-1339 [1] FILM-IDENTIFICATION (PITCH)  
32. 538-1359 [1] GUARD  
33. 538-1360 [1] GUARD  
34. 549-3378 [1] MANIFOLD  
35. 549-3379 [1] TUBE AS  
36. 556-0648 [1] TUBE AS  
37. 556-0649 [1] TUBE AS  
38. 556-0651 [1] GUARD AS  
39. 556-0653 [1] GUARD AS  
40. 556-0654 [1] BRACKET  
41. 556-0655 [1] BRACKET  
42. 556-0656 I [4] HOSE AS  
43. 556-3019 [1] TUBE AS  
44. 557-0492 [4] GROMMET  
45. 557-0493 [2] CLAMP  
46. 557-0494 [2] PLATE-GUARD  
47. 557-0495 [2] PLATE-GUARD  
48. 557-0497 [1] BRACKET AS  
49. 557-0499 I [1] HOSE AS  
50. 557-0500 I [1] HOSE AS  
51. 557-0501 I [1] HOSE AS  
52. 557-0502 I [1] HOSE AS  
53. 557-0503 I [1] HOSE AS  
54. 557-0504 I [1] HOSE AS  
55. 557-0505 I [1] HOSE AS  
56. 557-0507 [2] PLATE AS  
57. 557-0512 [2] BRACKET  
58. 557-0517 [1] GUARD AS  
59. 557-0519 [1] GUARD AS  
60. 558-0000 [1] COVER  
61. 558-0002 [1] GUARD AS  
62. 558-0004 [1] GUARD AS  
63. 559-4106 [2] BLOCK  
64. 8C-3205 [22] FLANGE-HALF  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00963170604
 

460-4445: LINES GP-HYDRAULIC FAN

460-4445 LINES GP-HYDRAULIC FAN
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 460-4455 HYDRAULIC AR
AN ATTACHMENT
i07478354 M0096317
4604445 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3129 M [1] STUD (M10X1.5-THD)  
2. 148-8327 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
3. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
4. 149-7738 [7] CLIP (LOOP)  
5. 288-4402 M [1] STUD-TAPERLOCK (M10X1.5X60-MM)  
6. 344-5675 M [2] NUT (M10X1.5-THD)  
7. 367-6023 [1] ADAPTER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
  8T-1809 [1] TEE-UNION  
8. 460-4454 I [1] HOSE AS  
9. 479-2172 [10] BOLT AS  
10. 4J-5267 [2] SEAL-O-RING  
11. 501-2119 I [1] HOSE AS  
12. 501-2120 I [1] HOSE AS  
13. 504-4848 [1] BRACKET AS  
14. 533-4159 [4] BOLT AS  
15. 535-7665 I [1] HOSE AS  
16. 554-1816 I [1] HOSE AS  
17. 554-1828 [1] BRACKET AS  
18. 5K-1094 [2] LOCKWASHER  
19. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
20. 5P-7466 [1] CLIP (SLOT)  
21. 5P-7467 [1] CLIP (TAB)  
22. 5P-8112 [1] GROMMET  
23. 6V-8398 [1] SEAL-O-RING  
24. 6V-9169 [1] NUT (13/16-16-THD)  
25. 6V-9746 [2] SEAL-O-RING  
26. 7G-3832 [1] GROMMET  
27. 7G-3833 [1] CLIP (TAB)  
28. 7G-3834 [1] CLIP (SLOT)  
29. 8C-3205 [2] FLANGE-HALF  
30. 8T-1897 [4] CLIP (SLOT)  
31. 8T-1898 [4] CLIP (TAB)  
32. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
34. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00963170605
 

460-4435: LINES GP-LIFT CYLINDER

460-4435 LINES GP-LIFT CYLINDER
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 460-4455 HYDRAULIC AR
AN ATTACHMENT
i07478350 M0096317
4604435 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 272-1882 M [2] STUD-TAPERLOCK (M12X1.75X80-MM)  
2. 301-7791 [2] CLIP (SLOT)  
3. 301-7792 [2] CLIP (TAB)  
4. 329-3356 M [2] NUT (M12X1.75-THD)  
5. 460-4439 [1] TUBE AS  
6. 460-4492 [1] TUBE AS  
7. 479-2171 [2] BOLT AS  
8. 493-7472 I [1] HOSE AS  
9. 493-7473 I [1] HOSE AS  
10. 499-3549 [1] TUBE AS  
11. 499-3550 [1] TUBE AS  
12. 4J-0520 [4] SEAL-O-RING  
13. 501-2116 [1] TUBE AS  
14. 501-2117 [1] TUBE AS  
15. 502-5674 [2] TEE AS  
    (EACH INCLUDES)
  5K-9090 [2] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  502-5673 [1] ADAPTER-TEE  
16. 533-4159 [16] BOLT AS  
17. 554-1826 [1] TUBE AS  
18. 5K-9090 [5] SEAL-O-RING  
19. 6V-9172 [4] NUT (1-7/16-12-THD)  
20. 7G-3832 [1] GROMMET  
21. 7G-3833 [1] CLIP (TAB)  
22. 7G-3834 [1] CLIP (SLOT)  
23. 8C-3206 [8] FLANGE-HALF  
24. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00963170606
 

473-3180: LINES GP-LIFT CYLINDER

473-3180 LINES GP-LIFT CYLINDER
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 538-1329 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i07509689 M0096317
4733180 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
2. 557-9998 I [2] HOSE AS  
3. 557-9999 I [2] HOSE AS  
4. 477-1199 [2] TUBE AS  
5. 558-7256 [1] GUARD AS  
6. 558-7254 [1] GUARD AS  
7. 144-7090 [4] CLIP (SLOT)  
8. 144-7091 [4] CLIP (TAB)  
9. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
10. 148-8362 [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
11. 344-5675 M [2] NUT (M10X1.5-THD)  
12. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 6V-9746 [2] SEAL-O-RING  
14. 3W-2647 [2] SPACER (13.5X30X10-MM THK)  
15. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
16. 8T-4222 [8] WASHER-PLATED (11X32X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00963170607
 

460-4450: LINES GP-PILOT

460-4450 LINES GP-PILOT
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 460-4455 HYDRAULIC AR
AN ATTACHMENT
i07478358 M0096317
4604450 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3129 M [1] STUD (M10X1.5-THD)  
2. 148-8325 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
3. 148-8327 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
4. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
5. 148-8339 [1] CONNECTOR AS  
  6V-8716 [1] CONNECTOR (STRAIGHT)  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
6. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
7. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
8. 158-9956 Y [1] VALVE GP-CHECK  
9. 164-5567 [3] COUPLER AS-QUICK DISCONNECT (MALE)  
    (EACH INCLUDES)
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
10. 200-0750 Y [1] ACCUMULATOR GP-PILOT OIL (CHARGED)  
11. 213-3745 [1] ELBOW  
12. 241-6215 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8076 [1] ELBOW  
13. 245-8842 [1] CLIP (LOOP)  
14. 344-5675 M [1] NUT (M10X1.5-THD)  
15. 3D-2824 [1] SEAL-O-RING  
16. 479-2171 [2] BOLT AS  
17. 541-6636 [3] CLIP (LOOP)  
18. 554-1818 [1] MANIFOLD  
19. 554-1820 I [1] HOSE AS  
20. 554-1821 I [1] HOSE AS  
21. 6V-0852 [3] CAP-DUST  
22. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4178 M [3] BOLT (M10X1.5X90-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00963170608
 

460-4475: LINES GP-PUMP

460-4475 LINES GP-PUMP
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 460-4455 HYDRAULIC AR
AN ATTACHMENT
i07478363 M0096317
4604475 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8575 [2] BOLT AS  
2. 144-0367 [4] CLAMP-HOSE  
3. 148-8324 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  6V-9874 [1] CONNECTOR (STRAIGHT)  
4. 148-8325 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
5. 148-8352 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
6. 148-8445 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9847 [1] TEE-SWIVEL  
7. 153-6230 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-9386 [1] CONNECTOR  
8. 162-0177 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
9. 171-3673 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  108-7005 [1] TEE-O-RING  
10. 193-8308 [2] ADAPTER  
11. 1P-4578 [6] FLANGE-HALF  
12. 250-1467 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  7I-8663 [1] CONNECTOR  
13. 280-8912 M [4] BOLT (M10X1.5X75-MM)  
14. 301-7791 [1] CLIP (SLOT)  
15. 301-7792 [1] CLIP (TAB)  
16. 344-5675 M [1] NUT (M10X1.5-THD)  
17. 354-5137 [1] SPACER (11X25X25-MM THK)  
18. 479-2171 [1] BOLT AS  
19. 479-2172 [1] BOLT AS  
20. 486-4944 [1] VALVE AS-RELIEF  
  2M-9780 J [1] SEAL-O-RING  
  161-6149 J [1] SEAL-O-RING  
  161-6161 J [2] RING-BACKUP  
21. 488-7654 [1] MANIFOLD  
22. 489-0304 [1] TUBE AS  
23. 489-7664 [1] BRACKET AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
24. 489-9459 [1] HOSE  
25. 491-0841 I [1] HOSE AS  
26. 4J-0520 [2] SEAL-O-RING  
27. 4J-0522 [4] SEAL-O-RING  
28. 519-5575 [1] HOSE  
29. 525-5311 I [1] HOSE AS  
30. 533-4159 [8] BOLT AS  
31. 542-5380 [2] CLIP  
32. 546-4842 [1] CLIP  
33. 551-4334 I [1] HOSE AS  
34. 551-4335 [1] TUBE AS  
35. 558-4454 [1] HOSE & TUBE AS  
36. 565-5090 I [1] HOSE AS  
37. 5K-9090 [1] SEAL-O-RING  
38. 5P-7468 [1] CLIP (SLOT)  
39. 5P-7469 [1] CLIP (TAB)  
40. 5P-8444 [1] GROMMET (37-MM ID)  
41. 6J-2680 [1] SEAL-O-RING  
42. 6V-9746 [1] SEAL-O-RING  
43. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
45. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
46. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
48. 8T-4983 [2] CLAMP-HOSE  
49. 8T-4984 [2] CLAMP-HOSE  
50. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  133-5545 J [1] KIT-SEAL  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00963170609
 

460-4362: LINES GP-RETURN

460-4362 LINES GP-RETURN
S/N LNC1-UP; HMH1-UP; D5M1-UP
PART OF 464-5464 CONTROL GP-RIPPER
AN ATTACHMENT
i07475366 M0096317
4604362 LINES GP-RETURN Parts scheme
  For full view, you need register

Parts for your D6 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 479-2172 [2] BOLT AS  
2. 101-3129 M [1] STUD (M10X1.5-THD)  
3. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
4. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
5. 150-4043 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
6. 198-4780 [1] WASHER-HARD (17.5X32X8-MM THK)  
7. 202-2762 [1] CLIP (LOOP)  
8. 339-8937 [1] CLIP (LOOP)  
9. 460-4589 [1] TUBE AS  
10. 477-6225 [1] TUBE AS  
11. 493-7461 I [1] HOSE AS  
12. 493-7462 I [1] HOSE AS  
13. 4J-0522 [2] SEAL-O-RING  
14. 5K-9090 [1] SEAL-O-RING  
15. 6V-8398 [1] SEAL-O-RING  
16. 8S-0023 [1] CLIP (SLOT)  
17. 8S-0024 [1] CLIP (TAB)  
18. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
20. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
21. 9X-2027 [4] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
D6 Track-Type Tractor
Ripper Cylinder Bearings - Lubricate
D6 Track-Type Tractor
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Angle Cylinder (Bulldozer)
D6 Track Type Tractor Machine Systems
Angle Cylinder (Bulldozer)
D6 Track Type Tractor Machine Systems
Angle Cylinder (Bulldozer)
D6 Track Type Tractor Machine Systems
Lift Cylinder (Bulldozer)
D6 Track Type Tractor Machine Systems
Tilt Cylinder (Bulldozer)
D6 Track Type Tractor Machine Systems
Ripper Lift Cylinder
D6 Track Type Tractor Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Operational Checks
D6 XE Track-Type Tractor Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
Hydraulic Cylinder Collapse - The Lift Cylinder Will Collapse When The Control Is In The Raised Position
D6T XE Electrical & Hydraulic Troubleshooting
Disassembly and Assembly
Ripper Lift Cylinder - Remove and Install
D6 Track-Type Tractor Machine Systems
Ripper Lift Cylinder - Disassemble
D6 Track-Type Tractor Machine Systems
Ripper Lift Cylinder - Assemble
D6 Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Remove and Install
D6 Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Remove and Install
D6 Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6 Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Disassemble
D6 Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Assemble
D6 Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Disassemble
D6 Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Assemble
D6 Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Disassemble
D6 Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Assemble
D6 Track-Type Tractor Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog D6 :

CYLINDER GP-RIPPER
476-3369 CYLINDER GP-RIPPER
CYLINDER GP-BULLDOZER LIFT
508-3812 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-ANGLING
555-8742 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
555-8737 CYLINDER GP-ANGLING
COVER GP-MOTOR
512-5159 COVER GP-MOTOR
COOLER GP-HYDRAULIC OIL
540-4465 COOLER GP-HYDRAULIC OIL
COOLER GP-HYDRAULIC OIL
464-5748 COOLER GP-HYDRAULIC OIL
464-5460 CONTROL AR-HYDRAULIC
460-4455 HYDRAULIC AR
LINES GP-ANGLE & TILT
460-4375 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
473-3160 LINES GP-ANGLE & TILT
LINES GP-HYDRAULIC FAN
460-4445 LINES GP-HYDRAULIC FAN
LINES GP-LIFT CYLINDER
460-4435 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
473-3180 LINES GP-LIFT CYLINDER
LINES GP-PILOT
460-4450 LINES GP-PILOT
LINES GP-PUMP
460-4475 LINES GP-PUMP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.