ELECTRICAL AND STARTING SYSTEM
WIRING GPLIGHTING GP
WIRING GP
SENSOR GP
WARNING GP
POWER TRAIN
AXLE GPDRIVE GP-FINAL
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#M00978670320
448-8920: WIRING GP-REAR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 2. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 3. | 422-0945 | [1] | PLATE | |
| 4. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 5. | 7K-1181 | [22] | STRAP-CABLE | |
| 6. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 9. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 10. | 113-8373 | [4] | SCREW-BUTTON HEAD (10-32X0.75-IN) | |
| 11. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 132-5789 | [2] | CLIP (LADDER) | |
| 14. | 171-2210 | [2] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN POWER) | |
| (EACH INCLUDES) | ||||
| 1H-3244 | [2] | LOCKWASHER | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 15. | 193-4623 | [4] | SCREW-BUTTON HEAD (10-32X0.5-IN) | |
| 16. | 1H-3244 | [1] | LOCKWASHER | |
| 17. | 204-2281 | [7] | STRAP-CABLE | |
| 18. | 204-8000 | [7] | MOUNTING-CABLE TIE | |
| 19. | 228-7100 | [1] | SEAL-O-RING | |
| 20. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (AMBIENT AIR) | |
| 21. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY) | |
| 22. | 271-6763 | [1] | BRACKET | |
| 23. | 320-3063 | [1] | SENSOR GP-PRESSURE (AIR FILTER) | |
| 24. | 344-5673 M | [2] | NUT (M6X1-THD) | |
| 25. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 26. | 422-0941 | [1] | BRACKET | |
| 27. | 422-0963 | [1] | STRAP | |
| 28. | 422-8663 | [1] | BRACKET AS | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2613 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 195-1095 M | [2] | STUD-WELD (M6X1X20-MM) | ||
| 29. | 435-8321 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 30. | [1] | BRACKET | ||
| 31. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 32. | 4B-4277 | [2] | WASHER (8.8X17.5X1.6-MM THK) | |
| 33. | 4P-7581 | [7] | CLIP (LADDER) | |
| 34. | 4P-7582 | [1] | CLIP (LADDER) | |
| 35. | 562-1549 | [1] | HARNESS AS-FUEL TANK (REAR, MAIN) | |
| 35A. | 113-8490 | [5] | FUSE (10-AMPERE) | |
| 35B. | 113-8491 | [3] | FUSE (15-AMPERE) | |
| 35C. | 113-8492 | [2] | FUSE (20-AMPERE) | |
| 35D. | 248-2841 | [1] | RELAY AS (24-VOLT)(BACKUP ALARM) | |
| 35E. | 248-2841 | [1] | RELAY AS (24-VOLT)(FUEL PRIMING PUMP) | |
| 306-0282 | [1] | BLOCK AS-FUSE | ||
| 306-0350 | [1] | COVER | ||
| 306-0351 | [1] | SEAL-COVER | ||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 274-3777 | [1] | CAP-CONNECTOR | ||
| 211-0052 | [2] | NUT (1-11/16-18-THD) | ||
| 7T-0093 | [4] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8729 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KI INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 361-2944 | [1] | PLUG AS-CONNECTOR | ||
| 7R-2751 | [27] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [27] | PLUG-SEAL | ||
| 274-8267 | [1] | PLUG (4-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 197-7259 | [1] | RECEPTACLE AS-CONNECTOR (19-PIN) | ||
| 225-3861 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 274-3781 | [1] | CAP-SEAL | ||
| 7R-2750 | [4] | SEAL-CONNECTOR | ||
| 128-4123 | [5] | SEAL-CABLE | ||
| 128-5016 | [4] | SEAL-CABLE | ||
| 202-0315 | [1] | TERMINAL AS (12-GA) | ||
| 128-4123 | [1] | SEAL-CABLE | ||
| 8T-8730 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [31] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 202-0313 | [4] | TERMINAL AS (18-GA) | ||
| (EACH INCLUDES) | ||||
| 128-5016 | [1] | SEAL-CABLE | ||
| 202-0314 | [8] | TERMINAL AS (14-GA) | ||
| (EACH INCLUDES) | ||||
| 128-4123 | [1] | SEAL-CABLE | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 310-0674 | [2] | LOCKWASHER | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 36. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 37. | 6V-9028 | [1] | SEAL-O-RING | |
| 38. | 7X-2552 M | [1] | BOLT (M16X2X30-MM) | |
| 39. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 40. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 41. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 42. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 43. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
| 44. | 7X-7877 E | STRIP-EDGE (14-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670321
506-4261: WIRING GP-REAR
506-4261 WIRING GP-REAR
S/N E921-UP
PART OF 563-7576 CONVERSION AR-MACHINE, 513-1056, 566-0885 OPTION AR-REGIONAL
S/N E921-UP
PART OF 563-7576 CONVERSION AR-MACHINE, 513-1056, 566-0885 OPTION AR-REGIONAL
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 538-2655 | [1] | PLATE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 4. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4137 M | [9] | BOLT (M10X1.5X20-MM) | |
| 6. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 7. | 9G-2758 | [1] | LOCKOUT-SWITCH | |
| 8. | 132-1806 | [1] | STRAP AS-GROUND | |
| 9. | 146-6747 | [1] | FILM-INFORMATION (24-VOLT) | |
| 10. | 423-1796 | [1] | FILM-IDENTIFICATION (BATTERY DISCONNECT, READ OMM) | |
| 11. | 424-6619 | [1] | BLOCK AS-JUNCTION | |
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 342-9671 | [1] | RECEPTACLE AS-AUXILIARY START | |
| 14. | 344-5675 M | [4] | NUT (M10X1.5-THD) | |
| 15. | 421-5575 Y | [1] | LAMP GP-INDICATOR (24-VOLT) | |
| 16. | 4S-1962 | [6] | CLIP (LOOP) | |
| 17. | [1] | PLATE | ||
| 18. | 562-2953 | [1] | CABLE AS | |
| 159-8049 E | CABLE (00-GA, RED)(173-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 224-6136 E | TUBE (7-CM) | |||
| 19. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 7V-6571 | [6] | GROMMET | |
| 21. | 8S-2634 | [1] | COVER AS | |
| 22. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 23. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 24. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 25. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670322
506-4264: WIRING GP-REAR
506-4264 WIRING GP-REAR
S/N E921-UP
JUMP START
PART OF 467-7428, 468-3183 OPTION AR-COLD WEATHER
S/N E921-UP
JUMP START
PART OF 467-7428, 468-3183 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-2758 | [1] | LOCKOUT-SWITCH | |
| 2. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 3. | 106-0800 | [1] | CONNECTOR GP (REMOTE JUMP START, POSITIVE) | |
| 4D-5243 | [1] | LOCKWASHER | ||
| 9B-9146 | [1] | NUT-SPECIAL (3/8-16-THD) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 277-5777 | [1] | COVER-TERMINAL | ||
| 4. | 132-1806 | [1] | STRAP AS-GROUND | |
| 5. | 146-6747 | [1] | FILM-INFORMATION (24-VOLT) | |
| 6. | 240-0231 | [1] | TERMINAL AS-BATTERY (REMOTE JUMP START, NEGATIVE) | |
| 7. | 395-5313 | [1] | BAR | |
| 8. | 424-6619 | [1] | BLOCK AS-JUNCTION (BATTERY) | |
| 9. | 4S-1962 | [6] | CLIP (LOOP) | |
| 10. | 562-2953 | [1] | CABLE AS | |
| 224-6136 E | TUBE (7-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(173-CM) | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 11. | 7K-1181 | [1] | STRAP-CABLE | |
| 12. | 7V-6571 | [6] | GROMMET | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670323
399-5965: WIRING GP-REAR LIGHTING
399-5965 WIRING GP-REAR LIGHTING
S/N E921-UP
PART OF 563-2430 LIGHTING AR-ROADING
S/N E921-UP
PART OF 563-2430 LIGHTING AR-ROADING
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| 2. | 3E-5169 | [1] | GUARD-SWITCH | |
| 3. | 7K-1181 | [28] | STRAP-CABLE | |
| 4. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 5. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 6A-3361 J | WIRE-ELECTRICAL (16-GA)(4-DM) | |||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M) | |||
| 6. | 243-5821 | [1] | BRACKET AS | |
| 7. | 353-4515 | [1] | SWITCH GP-TOGGLE (LIGHT) | |
| 3E-3390 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 379-3416 Y | [2] | LAMP GP-SIGNAL (24-VOLT)(REVERSE) | |
| 9. | 395-2113 Y | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| 10. | 399-5992 Y | [2] | HARNESS AS-LIGHTING (STOP, TAIL, TURN) | |
| 11. | 519-5922 Y | [1] | HARNESS AS-LIGHTING (FRONT) | |
| 12. | 521-2672 | [1] | BRACKET AS | |
| 13. | 130-5300 | [6] | CLIP | |
| 14. | 344-5673 M | [12] | NUT (M6X1-THD) | |
| 15. | 344-5674 M | [2] | NUT (M8X1.25-THD) | |
| 16. | 4P-7581 | [4] | CLIP (LADDER) | |
| 17. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 22. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670324
540-6986: WIRING GP-SECONDARY STEERING
540-6986 WIRING GP-SECONDARY STEERING
S/N E921-UP
PART OF 549-2269, 565-5643 CONTROL GP-SECONDARY STEERING
S/N E921-UP
PART OF 549-2269, 565-5643 CONTROL GP-SECONDARY STEERING
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [12] | STRAP-CABLE | |
| 2. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(PRIMARY STEERING) | |
| 2A. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(ACCUMULATOR) | |
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 132-5789 | [4] | CLIP (LADDER) | |
| 5. | 352-3970 | [1] | CLIP (LADDER) | |
| 6. | 3J-1907 | [2] | SEAL-O-RING | |
| 7. | 4P-7581 | [4] | CLIP (LADDER) | |
| 8. | 4P-8134 | [1] | CLIP (LADDER) | |
| 9. | 540-6987 Y | [1] | HARNESS AS-SENSOR | |
| 10. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670325
452-1820: WIRING GP-SENSOR
452-1820 WIRING GP-SENSOR -MOUNTING
S/N E921-UP
PART OF 561-7230, 561-7235 GRADE CONTROL AR
S/N E921-UP
PART OF 561-7230, 561-7235 GRADE CONTROL AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-9644 M | [4] | SCREW-FLAT HEAD (M8X1.25X25-MM) | |
| 2. | 329-3356 M | [2] | NUT (M12X1.75-THD) | |
| 3. | 344-5674 M | [4] | NUT (M8X1.25-THD) | |
| 4. | 363-0347 | [1] | SENSOR AS-ROTARY POSITION | |
| 5. | 470-4959 | [1] | SENSOR GP-GRADE (BLADE SLOPE) | |
| 521-5127 | [1] | SOFTWARE GP-MONITOR | ||
| 552-3288 | [1] | PAD | ||
| 6. | 491-1256 | [1] | BRACKET AS | |
| 7. | 491-1257 | [1] | BRACKET | |
| 8. | 498-8523 | [2] | COLLAR | |
| 9. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 10. | 554-8937 | [1] | CONTROL GP-ELECTRONIC | |
| 552-3289 | [1] | PAD | ||
| 11. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 12. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 15. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00978670326
566-5049: WIRING GP-WARNING BEACON
566-5049 WIRING GP-WARNING BEACON
S/N E921-UP
PART OF 566-5050 LIGHTING GP-WARNING BEACON
S/N E921-UP
PART OF 566-5050 LIGHTING GP-WARNING BEACON
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS#M00978670327
515-2235: AXLE AR-FRONT
515-2235 AXLE AR-FRONT -NON ALL WHEEL DRIVE
S/N E921-UP
PART OF 421-8676 POWER TRAIN AR
S/N E921-UP
PART OF 421-8676 POWER TRAIN AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS#M00978670328
469-8367: AXLE GP-FRONT
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-5667 | [2] | RETAINER | |
| 2. | 2G-8615 | [4] | WASHER-THRUST (2.015X3.625X0.11-IN THK) | |
| 3. | 2G-8626 | [2] | WASHER-THRUST (2.02X3.63X0.16-IN THK) | |
| 4. | 2G-8633 | [2] | PIN | |
| 5. | 2G-8741 | [4] | RING-METAL SEAL | |
| 6. | 2G-8768 | [4] | WASHER (10.5X53.8X3-MM THK) | |
| 7. | 2G-8777 | [4] | SEAL | |
| 8. | 3B-8485 | [2] | ELBOW | |
| 9. | 3B-8489 | [12] | FITTING-GREASE (1/8-27 PTF) | |
| 10. | 5K-5288 | [2] | SEAL GP-DUO-CONE | |
| (EACH INCLUDES) | ||||
| 5K-5129 | [2] | RING-SEALING | ||
| 11. | 5T-0906 | [2] | COVER | |
| 12. | 7D-8643 | [2] | RETAINER | |
| 13. | 8W-2290 Y | [1] | CYLINDER & MTG GP-STEERING | |
| 14. | 8W-4652 | [1] | HOUSING-SPINDLE | |
| 15. | 8W-4653 | [1] | HOUSING-SPINDLE | |
| 16. | 8W-5293 | [4] | PIN | |
| 17. | 8X-3434 | [1] | ARM AS-LEANING (LH) | |
| 17A. | 8W-6476 | [1] | PIN | |
| 17B. | 146-1842 | [1] | BUSHING | |
| 17C. | 146-1843 | [1] | BUSHING | |
| 18. | 8X-3435 | [1] | ARM AS-LEANING (RH) | |
| 18A. | 8W-6497 | [1] | PIN | |
| 18B. | 146-1842 | [1] | BUSHING | |
| 18C. | 146-1843 | [1] | BUSHING | |
| 19. | 9D-9797 | [2] | LOCK | |
| 20. | 103-9125 | [1] | BAR AS | |
| 20A. | 2G-8624 | [2] | BUSHING | |
| 21. | 131-3740 Y | [1] | LINK GP-STEERING | |
| 22. | 134-1081 | [1] | AXLE AS-FRONT | |
| 22A. | 2G-8631 | [4] | BUSHING | |
| 22B. | 131-4428 | [2] | BUSHING | |
| 23. | 248-6225 | [2] | SPINDLE | |
| 24. | 433-7105 | [8] | SEAL-PIN | |
| 25. | 508-6809 Y | [1] | CYLINDER & MTG GP-WHEEL LEAN | |
| 26. | 030-0060 | [2] | CUP-BEARING | |
| 27. | 030-0061 | [2] | CONE-BEARING | |
| 28. | 0S-1592 | [2] | BOLT (5/8-11X1.25-IN) | |
| 29. | 6C-3210 | [2] | BOLT (7/8-9X3-IN) | |
| 30. | 2G-8742 | [2] | WASHER-HARD (20X65X5-MM THK) | |
| 31. | 2H-3740 | [4] | BOLT (3/4-16X1.25-IN) | |
| 32. | 2J-3505 | [2] | NUT-FULL (7/8-9-THD) | |
| 33. | 2J-8163 | [2] | SEAL-O-RING | |
| 34. | 3B-4618 | [2] | PIN-COTTER | |
| 35. | 4D-3704 | [2] | WASHER-HARD (17X30X5-MM THK) | |
| 36. | 5D-0353 | [4] | BOLT-LOCKING (3/8-16X1-IN) | |
| 37. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 38. | 5P-8843 | [2] | SEAL-LIP TYPE | |
| 39. | 5P-8890 | [2] | SEAL-LIP TYPE | |
| 40. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 41. | 6V-5696 M | [6] | BOLT (M12X1.75X80-MM) | |
| 42. | 7D-8636 | [2] | CONE-BEARING | |
| 43. | 7D-8637 | [2] | CUP-BEARING | |
| 44. | 7X-7731 | [2] | PLUG-PIPE (3/4-14-THD) | |
| 45. | 8D-2811 | [2] | WASHER (1.25X1.94X0.032-IN THK) | |
| 46. | 9M-2092 | [4] | SEAL-O-RING | |
| 47. | 2G-3865 B | [6] | SHIM (0.127-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670329
380-0723: CARRIER GP-FINAL DRIVE
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-7213 | [1] | CARRIER-PLANETARY | |
| 2. | 8D-8634 | [4] | GEAR-PLANETARY (24-TEETH) | |
| 3. | 8W-2307 | [4] | SHAFT | |
| 4. | 265-9125 | [4] | RETAINER | |
| 5. | 2M-5685 | [8] | BEARING | |
| 6. | 5D-0353 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 7. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 8X-8376 | [8] | WASHER (44.78X79.25X2.92-MM THK) |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Caterpillar Parts SIS Catalog 120 :
Truck sale:
Caterpillar LIFT TRUCKS EJE120E, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
- Misc Forklifts
MADISA