AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-1370 CABLE GP-CONVEYOR S/N LB81-UP PART OF 374-1265 CONVEYOR AR AN ATTACHMENT PM620 COLD PLANER


IMPLEMENTS
CONVEYOR GP
CHAMBER GP
CONVEYOR GP
DRIVE GP-ROTOR

COLD PLANER PM620 COLD PLANER LB8
 PM620 Cold Planer LB800001-UP (MACHINE) POWERED BY C18 Engine M0100967 PM620 LB8   (2019)

IMPLEMENTS

CONVEYOR GP
CABLE GP-CONVEYOR
374-1370 CABLE GP-CONVEYOR
374-1265 CONVEYOR AR
374-1367 CONVEYOR AR-SECOND STAGE
374-1368 CONVEYOR AR-SECOND STAGE
 

#M01009670460
 

374-1370: CABLE GP-CONVEYOR

374-1370 CABLE GP-CONVEYOR
S/N LB81-UP
PART OF 374-1265 CONVEYOR AR
AN ATTACHMENT
i07669595 M0100967
3741370 CABLE GP-CONVEYOR Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 386-1455 [2] PLATE  
3. 481-4138 [2] BUSHING  
4. 464-0385 [2] CABLE  
5. 464-0386 [2] CABLE  
6. 129-3180 M [8] LOCKNUT (M12X1.75-THD)  
7. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
8. 7X-0590 [2] WASHER-HARD (13.5X44.5X6-MM THK)  
9. 7Y-7992 M [8] BOLT (M12X1.75X75-MM)  
10. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
11. 9X-8258 [4] WASHER (33X56X6-MM THK)  
12. 500-1607 B [4] SHIM (3-MM THK)  
13. 500-1608 B [6] SHIM (1-MM THK)  
14. 170-5707 [4] LOCKPIN  
15. 7X-0597 [4] WASHER-HARD (31X56X4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M01009670461
 

374-1407: CHAMBER GP-MIXING

374-1407 CHAMBER GP-MIXING
S/N LB81-UP
PART OF 558-2141 SPRAY AR-WATER
i07669615 M0100967
3741407 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 425-7391 [1] SENSOR GP-POSITION (PROXIMITY)(CONVEYOR)  
  471-9252 M [2] NUT-HEX JAM (M30X1.5-THD)  
5. 386-4489 [1] PIN  
6. 386-4490 [1] PIN  
7. 386-4491 [1] SUPPORT AS  
8. 486-9721 [1] CHAMBER AS  
  7T-1099 [1] LINK  
  102-8704 [3] PLATE  
  130-5300 [1] CLIP  
  154-4886 [1] PLATE AS  
  386-4455 [6] BAR-WEAR  
  386-4458 [3] BAR-WEAR  
9. 391-5709 [1] EYE-CYLINDER  
10. 391-5724 [1] GUIDE AS (RH)  
11. 392-4869 [2] BAR  
12. 396-0520 [1] DOOR AS  
13. 396-0521 [1] SUPPORT AS-CYLINDER  
14. 396-0529 [1] GUIDE AS (LH)  
15. 396-6539 [1] INSULATION  
16. 396-6540 [1] INSULATION  
17. 470-0148 [1] INSULATION  
18. 095-1299 [4] DOWEL  
19. 095-7993 [5] DOWEL  
20. 183-5105 [12] WASHER-HARD (33X56X12-MM THK)  
21. 3B-4632 [2] PIN-COTTER  
23. 7X-2553 M [8] BOLT (M16X2X40-MM)  
24. 7X-2555 M [2] BOLT (M16X2X80-MM)  
25. 7X-2564 M [4] BOLT (M20X2.5X90-MM)  
26. 7X-2586 M [6] BOLT (M30X3.5X180-MM)  
27. 8C-8722 M [6] NUT (M30X3.5-THD)  
28. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
29. 8T-4193 M [16] BOLT (M16X2X50-MM)  
30. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
31. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-5439 [5] WASHER-HARD (21.5X45X6-MM THK)  
34. 9X-8257 [26] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#M01009670462
 

374-1265: CONVEYOR AR

374-1265 CONVEYOR AR
S/N LB81-UP
PART OF 558-4169 MACHINE AR
AN ATTACHMENT
i07669491 M0100967
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  374-1370 Y [1] CABLE GP-CONVEYOR  
  568-0076 Y [1] CONVEYOR GP  
  390-1875 Y [1] FLASHING GP  
  374-1400 Y [1] PIVOT GP-CONVEYOR  
  Y   SEPARATE ILLUSTRATION
 

#M01009670463
 

374-1367: CONVEYOR AR-SECOND STAGE

374-1367 CONVEYOR AR-SECOND STAGE -FOLDING
S/N LB81-UP
PART OF 574-5195, 574-5197 DISTRIBUTION AR
AN ATTACHMENT
i07668947 M0100967
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  500-1611 Y [1] CONVEYOR GP (FOLDING)  
  374-1317 Y [1] CYLINDER & MTG GP-CONVEYOR (FOLDING)  
  374-1336 Y [1] LINES GP-CONVEYOR MOTOR (FOLDING)  
  568-0534 Y [1] MOTOR & MOUNTING GP (CONVEYOR)  
  374-1372 Y [1] WIRING GP-CONVEYOR  
  Y   SEPARATE ILLUSTRATION
 

#M01009670464
 

374-1368: CONVEYOR AR-SECOND STAGE

374-1368 CONVEYOR AR-SECOND STAGE
S/N LB81-UP
AN ATTACHMENT
i07668971 M0100967
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  500-1313 Y [1] CONVEYOR GP  
  374-1375 Y [1] LINES GP-MOTOR  
  568-0534 Y [1] MOTOR & MOUNTING GP  
  374-1372 Y [1] WIRING GP-CONVEYOR  
  Y   SEPARATE ILLUSTRATION
 

#M01009670465
 

500-1312: CONVEYOR GP

500-1312 CONVEYOR GP
S/N LB81-UP
PART OF 568-0076 CONVEYOR GP
AN ATTACHMENT
i07669622 M0100967
5001312 CONVEYOR GP Parts scheme 5001312 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4194 M [20] BOLT (M12X1.75X50-MM)  
4. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
5. 8T-6912 M [8] BOLT (M8X1.25X50-MM)  
6. 1W-0104 [8] DOWEL-HOLLOW  
7. 5P-1076 [44] WASHER-HARD (13.5X30X4-MM THK)  
8. 5P-4116 [24] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 7X-7729 [18] WASHER (11X25X3-MM THK)  
10. 8T-0389 M [18] LOCKNUT (M10X1.5-THD)  
11. 8T-4132 M [16] NUT (M16X2-THD)  
12. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
13. 8T-5361 [8] WASHER-HARD (28X49X5-MM THK)  
14. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
15. 099-3649 M [2] BOLT (M8X1.25X40-MM)  
16. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
17. 344-5674 M [2] NUT (M8X1.25-THD)  
19. 543-2998 [4] ROLLER GP  
20. 382-9635 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
21. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
  5B-0935 [1] FITTING-GREASE  
22. 524-3168 [1] BELT-CONVEYOR  
23. 386-1473 [2] LINK AS  
24. 541-1678 [2] ROLLER-GUIDE  
25. 388-9556 [1] PULLEY AS  
26. 391-3137 [4] PLATE  
27. 422-6913 [1] PLATE AS (RH)  
28. 422-6914 [1] PLATE AS (LH)  
29. 434-6416 Q [1] PULLEY GP-HEAD  
29A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
30. 528-5017 [2] IDLER-RETURN  
31. 533-1498 [1] FRAME AS-CONVEYOR  
32. 467-8773 [6] SUPPORT  
33. 498-2087 [1] GUARD AS (LH)  
  364-6428 M [8] STUD-WELD (M10X1.5X35-MM)  
34. 498-2088 [1] GUARD AS (RH)  
  364-6428 M [8] STUD-WELD (M10X1.5X35-MM)  
35. [1] PLATE-RETAINER  
36. [2] PLATE-RETAINER  
37. [2] PLATE-RETAINER  
38. 499-2421 [2] SEAL  
39. [1] PLATE-RETAINER  
40. 173-3651 [4] PIN-CLEVIS  
41. 190-4375 [4] WASHER (26X40X2-MM THK)  
42. 193-8340 M [16] BOLT-CARRIAGE (M16X2X65-MM)  
43. 287-2499 M [4] NUT (M24X2-THD)  
44. 329-3356 M [12] NUT (M12X1.75-THD)  
45. 9R-2959 [4] CLIP  
46. 7K-1181 [6] STRAP-CABLE  
47. 148-8320 [4] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
48. 267-9432 [2] ADAPTER  
49. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
50. 502-9136 [1] HOSE AS  
51. 502-9135 [1] HOSE AS  
   
    AVAILABLE REPAIR KIT(S):
  569-2075 Y [1] KIT-ROLLER  
  569-2074 Y [1] KIT-ROLLER  
  569-0347 Y [1] KIT-IDLER  
  569-0346 Y [1] KIT-BEARING  
  569-0314 Y [1] KIT-FEEDER CONVEYOR  
  M   METRIC PART
  Q   KIT MARKED Q SERVICES PART(S) MARKED Q
  Y   SEPARATE ILLUSTRATION
 

#M01009670466
 

500-1313: CONVEYOR GP

500-1313 CONVEYOR GP
S/N LB81-UP
PART OF 374-1368 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i07668972 M0100967
5001313 CONVEYOR GP Parts scheme 5001313 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0104 [22] DOWEL-HOLLOW  
2. 381-8182 [2] PLATE AS  
3. 381-8183 [2] SUPPORT AS  
4. [6] PLATE  
5. [1] BELT-CONVEYOR  
6. 543-2998 [7] ROLLER GP  
7. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  5B-0935 [1] FITTING-GREASE  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
8. [2] COVER  
9. [1] COVER  
11. 386-4203 [1] BEARING AS  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
12. [1] PLATE-MOUNTING  
13. 388-9556 [1] PULLEY AS  
14. [1] PLATE  
16. 396-3219 [2] SUPPORT AS  
17. 399-0228 [2] GUARD GP-CONVEYOR  
    (EACH INCLUDES)
  352-2979 J [1] LATCH AS  
  160-8499 M [2] NUT (M12X1.5-THD)  
  326-0612 [2] WASHER-TAB  
  5C-2890 M [4] NUT (M6X1-THD)  
  1H-3244 [4] LOCKWASHER  
  366-0082 [1] PAWL  
  468-0420 [1] GUARD AS  
18. [2] STUD  
20. 434-6416 [1] PULLEY GP-HEAD  
20A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
21. 528-5017 [3] IDLER-RETURN  
22. 538-7252 [1] GUARD AS (RH)  
23. 538-7253 [1] GUARD AS (LH)  
    (EACH GUARD AS INCLUDES)
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
24. 533-3937 [1] FRAME AS-CONVEYOR  
25. 543-2999 [4] ROLLER  
26. 543-3000 [8] ROLLER GP  
27. 475-9736 [2] FLASHING  
28. 475-9737 [1] RUBBER  
29. 475-9738 [1] FLASHING  
30. 475-9739 [1] PLATE  
31. 475-9740 [4] PLATE  
32. 476-2080 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
33. 476-2085 [1] FLASHING  
34. 483-8730 [1] SHEET AS  
35. 483-8731 [1] SHEET AS  
36. 497-8790 [1] PLATE AS  
  7T-1099 [1] LINK  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
  497-8795 [1] PLATE  
37. 497-8791 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
38. 497-8792 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
39. 497-8793 [1] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
40. 497-8794 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
41. 497-8801 [2] FLASHING  
42. 497-8802 [2] FLASHING  
43. 497-8803 [2] PLATE-RETAINER  
44. 497-8804 [6] PLATE-RETAINER  
45. 498-6593 [1] HOPPER AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
46. 095-0881 [1] PIN-SPRING  
47. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
48. 131-3540 M [22] LOCKNUT (M8X1.25-THD)  
49. 190-4375 [4] WASHER (26X40X2-MM THK)  
50. 193-8340 M [8] BOLT-CARRIAGE (M16X2X65-MM)  
51. 287-2499 M [4] NUT (M24X2-THD)  
52. 329-3356 M [2] NUT (M12X1.75-THD)  
53. 344-5674 M [2] NUT (M8X1.25-THD)  
54. 344-5675 M [4] NUT (M10X1.5-THD)  
55. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
56. 6V-7676 M [4] NUT (M24X3-THD)  
57. 7X-7729 [95] WASHER (11X25X3-MM THK)  
58. 8T-0389 M [16] LOCKNUT (M10X1.5-THD)  
59. 8T-4001 M [5] NUT (M24X3-THD)  
60. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
61. 8T-4132 M [8] NUT (M16X2-THD)  
62. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
63. 8T-4139 M [40] BOLT (M12X1.75X30-MM)  
64. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
66. 8T-4193 M [8] BOLT (M16X2X50-MM)  
68. 8T-4222 [11] WASHER-PLATED (11X32X2.5-MM THK)  
69. 8T-4223 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
70. 8T-4224 [44] WASHER-HARD (8.8X16X2-MM THK)  
71. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
72. 8T-5005 M [16] BOLT (M10X1.5X70-MM)  
73. 8T-5878 M [4] BOLT (M24X3X80-MM)  
74. 8T-6912 M [22] BOLT (M8X1.25X50-MM)  
75. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
76. 8T-8549 M [4] LOCKNUT (M12X1.75-THD)  
77. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
78. 513-4565 [1] PLATE AS (LH)  
  7T-1099 [1] LINK  
79. 513-4566 [1] PLATE AS (RH)  
80. 8T-0722 M [40] BOLT-LOCKING (M10X1.5X30-MM)  
81. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
82. 8T-0441 M [3] BOLT (M10X1.5X45-MM)  
83. 161-7632 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
84. 465-4955 [1] FITTING-GREASE  
85. 541-1678 [2] ROLLER-GUIDE  
86. 8T-4201 M [22] BOLT-LOCKING (M10X1.5X20-MM)  
   
    AVAILABLE REPAIR KIT(S):
  569-0351 Y [1] KIT-ROLLER  
  569-0348 Y [1] KIT-ROLLER  
  569-0350 Y [1] KIT-IDLER  
  569-5423 Y [1] KIT-ROLLER  
  569-0346 Y [1] KIT-BEARING  
  569-0349 Y [1] KIT-FEEDER CONVEYOR  
  569-0313 Y [1] FLASHING GP (KIT)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01009670467
 

500-1611: CONVEYOR GP

500-1611 CONVEYOR GP
S/N LB81-UP
FOLDING
PART OF 374-1367 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i07668951 M0100967
5001611 CONVEYOR GP Parts scheme 5001611 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0104 [22] DOWEL-HOLLOW  
2. 115-4360 [8] RING-RETAINING  
3. [6] PLATE  
4. [1] BELT-CONVEYOR  
5. 543-2998 [7] ROLLER GP  
6. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  5B-0935 [1] FITTING-GREASE  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
7. [2] COVER  
8. [1] COVER  
9. 541-1678 [2] ROLLER-GUIDE  
10. 386-4203 [1] BEARING AS  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
11. [1] PLATE-MOUNTING  
12. 388-9556 [1] PULLEY AS  
13. [1] PLATE  
14. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
15. 399-0228 [2] GUARD GP-CONVEYOR  
    (EACH INCLUDES)
  352-2979 J [1] LATCH AS  
  160-8499 M [2] NUT (M12X1.5-THD)  
  326-0612 [2] WASHER-TAB  
  5C-2890 M [4] NUT (M6X1-THD)  
  8C-3398 [4] LOCKWASHER  
  366-0082 [1] PAWL  
  468-0420 [1] GUARD AS  
16. [2] STUD  
18. 434-6416 [1] PULLEY GP-HEAD  
18A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
19. 528-5017 [3] IDLER-RETURN  
20. 538-7252 [1] GUARD AS (RH)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
21. 538-7253 [1] GUARD AS (LH)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
22. 466-4180 [2] LINKAGE AS (REAR)  
    (EACH INCLUDES)
22A. 467-5855 [1] BUSHING  
  466-5005 [1] LINKAGE AS  
23. 466-4190 [6] PIN-LINKAGE  
24. 466-4995 [1] LINKAGE AS (FRONT, LH)  
25. 466-5010 [1] LINKAGE AS (FRONT, RH)  
26. 467-5850 [2] SHAFT-LINKAGE  
28. 470-0130 [1] FRAME AS-CONVEYOR  
  7T-1099 [10] LINK  
  154-4887 [1] PLATE AS  
  178-8505 [1] PLATE-WELD  
  355-8941 M [8] NUT-WELD (M16X2-THD)  
  361-5420 [3] CLIP  
29. 526-6348 [1] FRAME AS-CONVEYOR  
29A. 386-4205 [2] BEARING  
30. 543-2999 [4] ROLLER  
31. 543-3000 [8] ROLLER GP  
32. 475-9736 [2] FLASHING  
33. 475-9737 [1] RUBBER  
34. 475-9738 [1] FLASHING  
35. 475-9739 [1] PLATE  
36. 475-9740 [4] PLATE  
37. 476-2080 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
38. 476-2085 [1] FLASHING  
39. 478-5298 [1] SHEET AS  
40. 478-5299 [1] SHEET AS  
41. 497-8790 [1] PLATE AS  
  7T-1099 [1] LINK  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
  497-8795 [1] PLATE  
42. 497-8791 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
43. 497-8792 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
44. 497-8793 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
45. 497-8794 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
46. 497-8801 [2] FLASHING  
47. 497-8802 [2] FLASHING  
48. 497-8803 [2] PLATE-RETAINER  
49. 497-8804 [6] PLATE-RETAINER  
50. 497-9970 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
51. 497-9971 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
52. 498-6593 [1] HOPPER AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
53. 095-0881 [1] PIN-SPRING  
54. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
55. 131-3540 M [22] LOCKNUT (M8X1.25-THD)  
56. 190-4375 [4] WASHER (26X40X2-MM THK)  
57. 193-8340 M [8] BOLT-CARRIAGE (M16X2X65-MM)  
58. 287-2499 M [4] NUT (M24X2-THD)  
59. 344-5674 M [2] NUT (M8X1.25-THD)  
60. 344-5675 M [4] NUT (M10X1.5-THD)  
61. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
62. 6V-8144 [6] RING-RETAINING  
63. 7X-0537 [6] WASHER-HARD (40.5X67X6-MM THK)  
64. 7X-0597 [10] WASHER-HARD (31X56X4-MM THK)  
65. 7X-2554 M [2] BOLT (M16X2X70-MM)  
66. 7X-2563 M [2] BOLT (M20X2.5X60-MM)  
67. 7X-7729 [95] WASHER (11X25X3-MM THK)  
68. 8T-0389 M [16] LOCKNUT (M10X1.5-THD)  
69. 8T-4001 M [5] NUT (M24X3-THD)  
70. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
71. 8T-4131 M [2] NUT (M20X2.5-THD)  
72. 8T-4132 M [10] NUT (M16X2-THD)  
73. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
74. 8T-4139 M [40] BOLT (M12X1.75X30-MM)  
76. 8T-4193 M [8] BOLT (M16X2X50-MM)  
78. 8T-4222 [11] WASHER-PLATED (11X32X2.5-MM THK)  
79. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
80. 8T-4224 [44] WASHER-HARD (8.8X16X2-MM THK)  
81. 8T-5005 M [16] BOLT (M10X1.5X70-MM)  
82. 8T-6912 M [22] BOLT (M8X1.25X50-MM)  
83. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
84. 8T-8549 M [4] LOCKNUT (M12X1.75-THD)  
85. 465-4955 [1] FITTING-GREASE  
86. 513-4565 [1] PLATE AS  
  7T-1099 [1] LINK  
87. 513-4566 [1] PLATE AS  
88. 161-7632 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
89. 8T-0441 M [3] BOLT (M10X1.5X45-MM)  
90. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
91. 8T-0722 M [40] BOLT-LOCKING (M10X1.5X30-MM)  
92. 8T-4201 M [22] BOLT-LOCKING (M10X1.5X20-MM)  
   
    AVAILABLE REPAIR KIT(S):
  569-0351 Y [1] KIT-ROLLER  
  569-0348 Y [1] KIT-ROLLER  
  569-0350 Y [1] KIT-IDLER  
  569-5423 Y [1] KIT-ROLLER  
  569-0346 Y [1] KIT-BEARING  
  569-0349 Y [1] KIT-FEEDER CONVEYOR  
  569-0313 Y [1] FLASHING GP (KIT)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01009670468
 

568-0076: CONVEYOR GP

568-0076 CONVEYOR GP
S/N LB81-UP
PART OF 374-1265 CONVEYOR AR
AN ATTACHMENT
i07669599 M0100967
5680076 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 399-5658 Y [1] BELT TENSIONER GP (GREASE)  
2. 500-1312 Y [1] CONVEYOR GP  
3. 568-0077 Y [1] LINES GP-CONVEYOR  
4. 568-0078 Y [1] MOTOR & MOUNTING GP (CONVEYOR)  
5. 568-0080 Y [1] LINES GP-WATER  
  Y   SEPARATE ILLUSTRATION
 

#M01009670469
 

565-7843: DRIVE GP-ROTOR

565-7843 DRIVE GP-ROTOR
S/N LB81-UP
PART OF 390-2865 MOUNTING GP-AUX DRIVE MOTOR
AN ATTACHMENT
i07669635 M0100967
5657843 DRIVE GP-ROTOR Parts scheme 5657843 DRIVE GP-ROTOR Parts scheme
  For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
2. 2H-3931 [1] SEAL-O-RING  
3. 3K-0715 [1] SEAL-O-RING  
4. 568-5410 [1] BUSHING  
5. 101-7398 M [6] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
6. 513-7029 [1] SEAL-LIP TYPE  
7. 495-0448 [1] SPACER (160X179.5X0.3-MM THK)  
8. 495-0447 [1] SPACER (160X179.5X0.2-MM THK)  
9. 287-4136 [1] BEARING  
10. 495-0445 [1] SPACER (85X105X131.5-MM THK)  
11. 495-0446 [1] SPACER (165X180X131.5-MM THK)  
12. 496-0540 [1] BEARING-ROLLER  
13. 568-5409 [1] SHAFT-DRIVE  
14. 495-0444 [1] COUPLING  
15. 095-0940 [1] RING-RETAINING (INTERNAL)  
16. 133-2905 [1] RING-RETAINING (EXTERNAL)  
17. 495-0443 [1] SPACER (120X151X5-MM THK)  
18. 224-6080 [1] SEAL-O-RING  
19. 264-1117 M [17] BOLT-SOCKET HEAD (M14X2X150-MM)  
20. 459-4708 [2] PLUG-BREATHER  
21. 7S-8561 [2] SEAL-O-RING  
22. 495-0439 [1] PAD  
23. 512-2214 [1] GEAR-SUN (22-TEETH)  
24. 512-2213 [1] GEAR-SUN (21-TEETH)  
25. 496-0537 [3] PIN  
26. 8T-3957 M [5] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
27. 512-2212 [1] GEAR-SUN (28-TEETH)  
28. 495-0440 [1] NUT-RING  
29. 496-0538 [2] BEARING-ROLLER  
30. 510-8809 [2] PLUG  
31. 543-5315 [2] PLUG AS  
    (EACH INCLUDES)
  451-2767 [1] SEAL  
32. 495-0441 [1] SPACER (260X275X35-MM THK)  
33. 305-7976 [1] SEAL GP-DUO-CONE  
34. 568-5411 [1] COVER  
35. 568-5412 [1] FLANGE  
36. 568-5413 [1] PLATE-END  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM620 and PM622 Cold Planer
Conveyors - Lubricate
PM620 and PM622 Cold Planer
Upper Conveyor Deflectors (Second Stage) - Inspect/Replace
PM620 and PM622 Cold Planer
Upper Conveyor Support Cables - Check
PM620 and PM622 Cold Planer
Dust System - Clean
PM620 and PM622 Cold Planer
Conveyor Belt Tension and Tracking - Adjust
PM620 and PM622 Cold Planer
Specifications
Lines (Conveyor)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Lines (Conveyor) - Motor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Testing and Adjusting
Conveyor (First Stage) - Test - Case Drain Flow for Piston Motor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Conveyor (Second Stage) - Test - Case Drain Flow for Piston Motor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Disassembly and Assembly
Conveyor (First Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Pulley (Tail, First Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor (Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Pulley (Head, First Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Pivot - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Belt (Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Idler (Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Roller (Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Idler (First Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Roller (First Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Pulley (Head, Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Conveyor Pulley (Tail, Second Stage) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems

Caterpillar Parts SIS Catalog PM620 :

BIT AS-CUTTER
460-7190 BIT AS-CUTTER
BIT AS-CUTTER
222-7571 BIT AS-CUTTER
BELT TENSIONER GP
399-5658 BELT TENSIONER GP
ANTISLAB & MOUNTING GP
521-6079 ANTISLAB & MOUNTING GP
VALVE GP-SOLENOID
476-7110 VALVE GP-SOLENOID
VALVE GP-PUMP CONTROL
462-1143 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
421-1062 VALVE GP-PUMP CONTROL
VALVE GP-MOTOR CONTROL
474-9201 VALVE GP-MOTOR CONTROL
CHAMBER GP-MIXING
374-1407 CHAMBER GP-MIXING
374-1265 CONVEYOR AR
374-1367 CONVEYOR AR-SECOND STAGE
374-1368 CONVEYOR AR-SECOND STAGE
CONVEYOR GP
500-1312 CONVEYOR GP
CONVEYOR GP
500-1313 CONVEYOR GP
CONVEYOR GP
500-1611 CONVEYOR GP
CONVEYOR GP
568-0076 CONVEYOR GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.