AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-1407 CHAMBER GP-MIXING S/N 8RF1-UP PART OF 558-2141 SPRAY AR-WATER WEG GENERATOR


IMPLEMENTS
CHAMBER GP
CONVEYOR GP
DRIVE GP-ROTOR
ROTOR GP

GENERATOR WEG GENERATOR 8RF
 PM620 Cold Planer 8RF00001-UP POWERED BY C18 Engine M0101114 WEG 8RF   (1986)

IMPLEMENTS

CHAMBER GP
CHAMBER GP-MIXING
374-1407 CHAMBER GP-MIXING
PLATE GP-ROTOR
557-9048 PLATE GP-ROTOR
 

#M01011140370
 

374-1407: CHAMBER GP-MIXING

374-1407 CHAMBER GP-MIXING
S/N 8RF1-UP
PART OF 558-2141 SPRAY AR-WATER
i06280403 M0101114
3741407 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 425-7391 [1] SENSOR GP-POSITION (PROXIMITY)(CONVEYOR)  
  471-9252 M [2] NUT-HEX JAM (M30X1.5-THD)  
5. 386-4489 [1] PIN  
6. 386-4490 [1] PIN  
7. 386-4491 [1] SUPPORT AS  
8. 486-9721 [1] CHAMBER AS  
  7T-1099 [1] LINK  
  102-8704 [3] PLATE  
  130-5300 [1] CLIP  
  154-4886 [1] PLATE AS  
  386-4455 [6] BAR-WEAR  
  386-4458 [3] BAR-WEAR  
9. 391-5709 [1] EYE-CYLINDER  
10. 391-5724 [1] GUIDE AS (RH)  
11. 392-4869 [2] BAR  
12. 396-0520 [1] DOOR AS  
13. 396-0521 [1] SUPPORT AS-CYLINDER  
14. 396-0529 [1] GUIDE AS (LH)  
15. 396-6539 [1] INSULATION  
16. 396-6540 [1] INSULATION  
17. 470-0148 [1] INSULATION  
18. 095-1299 [4] DOWEL  
19. 095-7993 [5] DOWEL  
20. 183-5105 [12] WASHER-HARD (33X56X12-MM THK)  
21. 3B-4632 [2] PIN-COTTER  
23. 7X-2553 M [8] BOLT (M16X2X40-MM)  
24. 7X-2555 M [2] BOLT (M16X2X80-MM)  
25. 7X-2564 M [4] BOLT (M20X2.5X90-MM)  
26. 7X-2586 M [6] BOLT (M30X3.5X180-MM)  
27. 8C-8722 M [6] NUT (M30X3.5-THD)  
28. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
29. 8T-4193 M [16] BOLT (M16X2X50-MM)  
30. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
31. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-5439 [5] WASHER-HARD (21.5X45X6-MM THK)  
34. 9X-8257 [26] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#M01011140371
 

374-1265: CONVEYOR AR

374-1265 CONVEYOR AR
S/N 8RF1-UP
PART OF 558-4169 MACHINE AR
AN ATTACHMENT
i07515849 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  374-1370 Y [1] CABLE GP-CONVEYOR  
  500-1312 Y [1] CONVEYOR GP  
    -OR-
  568-0076 Y [1] CONVEYOR GP  
  374-1400 Y [1] PIVOT GP-CONVEYOR  
  390-1875 Y [1] FLASHING GP  
  Y   SEPARATE ILLUSTRATION
 

#M01011140372
 

374-1367: CONVEYOR AR-SECOND STAGE

374-1367 CONVEYOR AR-SECOND STAGE -FOLDING
S/N 8RF1-UP
AN ATTACHMENT
i06222299 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  500-1611 Y [1] CONVEYOR GP (FOLDING)  
  374-1317 Y [1] CYLINDER & MTG GP-CONVEYOR (FOLDING)  
  374-1336 Y [1] LINES GP-CONVEYOR MOTOR (FOLDING)  
  374-1372 Y [1] WIRING GP-CONVEYOR  
  568-0534 Y [1] MOTOR & MOUNTING GP (CONVEYOR)  
  Y   SEPARATE ILLUSTRATION
 

#M01011140373
 

374-1368: CONVEYOR AR-SECOND STAGE

374-1368 CONVEYOR AR-SECOND STAGE
S/N 8RF1-UP
AN ATTACHMENT
i06222302 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  500-1313 Y [1] CONVEYOR GP  
  374-1375 Y [1] LINES GP-MOTOR  
  568-0534 Y [1] MOTOR & MOUNTING GP  
  374-1372 Y [1] WIRING GP-CONVEYOR  
  Y   SEPARATE ILLUSTRATION
 

#M01011140374
 

500-1312: CONVEYOR GP

500-1312 CONVEYOR GP
S/N 8RF1-UP
PART OF 568-0076 CONVEYOR GP
AN ATTACHMENT
i06628557 M0101114
5001312 CONVEYOR GP Parts scheme 5001312 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4194 M [20] BOLT (M12X1.75X50-MM)  
4. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
5. 8T-6912 M [8] BOLT (M8X1.25X50-MM)  
6. 1W-0104 [8] DOWEL-HOLLOW  
7. 5P-1076 [44] WASHER-HARD (13.5X30X4-MM THK)  
8. 5P-4116 [24] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 7X-7729 [18] WASHER (11X25X3-MM THK)  
10. 8T-0389 M [18] LOCKNUT (M10X1.5-THD)  
11. 8T-4132 M [16] NUT (M16X2-THD)  
12. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
13. 8T-5361 [8] WASHER-HARD (28X49X5-MM THK)  
14. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
15. 099-3649 M [2] BOLT (M8X1.25X40-MM)  
16. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
17. 344-5674 M [2] NUT (M8X1.25-THD)  
19. 543-2998 [4] ROLLER GP  
20. 382-9635 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
21. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
  5B-0935 [1] FITTING-GREASE  
22. 524-3168 [1] BELT-CONVEYOR  
23. 386-1473 [2] LINK AS  
24. 541-1678 [2] ROLLER-GUIDE  
25. 388-9556 [1] PULLEY AS  
26. 391-3137 [4] PLATE  
27. 422-6913 [1] PLATE AS (RH)  
28. 422-6914 [1] PLATE AS (LH)  
29. 434-6416 [1] PULLEY GP-HEAD  
29A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
30. 528-5017 [2] IDLER-RETURN  
31. 533-1498 [1] FRAME AS-CONVEYOR  
  7T-1099 [6] LINK  
32. 467-8773 [6] SUPPORT  
33. 498-2087 [1] GUARD AS (LH)  
34. 498-2088 [1] GUARD AS (RH)  
    (EACH GUARD AS INCLUDES)
  8T-3597 M [6] NUT-WELD (M12X1.75-THD)  
35. [1] PLATE-RETAINER  
36. [2] PLATE-RETAINER  
37. [2] PLATE-RETAINER  
38. 499-2421 [2] SEAL  
39. [1] PLATE-RETAINER  
40. 173-3651 [4] PIN-CLEVIS  
41. 190-4375 [4] WASHER (26X40X2-MM THK)  
42. 193-8340 M [16] BOLT-CARRIAGE (M16X2X65-MM)  
43. 287-2499 M [4] NUT (M24X2-THD)  
44. 329-3356 M [12] NUT (M12X1.75-THD)  
45. 9R-2959 [4] CLIP  
46. 7K-1181 [6] STRAP-CABLE  
47. 148-8320 [4] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
48. 267-9432 [2] ADAPTER  
49. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
50. 502-9136 [1] HOSE AS  
51. 502-9135 [1] HOSE AS  
52. 6A-9718 [3] WASHER (8.1X12.5X1-MM THK)  
53. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
54. 279-6497 [1] FILM-INSTRUCTION (GREASE, READ OMM)  
55. 352-2586 [1] BOLT-SPECIAL  
56. 572-1728 [2] PLATE  
57. 576-2631 [1] PLATE  
  M   METRIC PART
 

#M01011140375
 

500-1313: CONVEYOR GP

500-1313 CONVEYOR GP
S/N 8RF1-UP
PART OF 374-1368 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i06628526 M0101114
5001313 CONVEYOR GP Parts scheme 5001313 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0104 [22] DOWEL-HOLLOW  
2. 381-8182 [2] PLATE AS  
3. 381-8183 [2] SUPPORT AS  
4. [6] PLATE  
5. [1] BELT-CONVEYOR  
6. 543-2998 [7] ROLLER GP  
7. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  5B-0935 [1] FITTING-GREASE  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
8. [2] COVER  
9. [1] COVER  
11. 386-4203 [1] BEARING AS  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
12. [1] PLATE-MOUNTING  
13. 388-9556 [1] PULLEY AS  
14. [1] PLATE  
16. 396-3219 [2] SUPPORT AS  
17. 399-0228 [2] GUARD GP-CONVEYOR  
    (EACH INCLUDES)
  352-2979 J [1] LATCH AS  
  160-8499 M [2] NUT (M12X1.5-THD)  
  326-0612 [2] WASHER-TAB  
  5C-2890 M [4] NUT (M6X1-THD)  
  1H-3244 [4] LOCKWASHER  
  366-0082 [1] PAWL  
  468-0420 [1] GUARD AS  
18. [2] STUD  
20. 434-6416 [1] PULLEY GP-HEAD  
20A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
21. 528-5017 [3] IDLER-RETURN  
22. 538-7252 [1] GUARD AS (RH)  
23. 538-7253 [1] GUARD AS (LH)  
    (EACH GUARD AS INCLUDES)
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
24. 533-3937 [1] FRAME AS-CONVEYOR  
25. 543-2999 [4] ROLLER  
26. 543-3000 [8] ROLLER GP  
27. 475-9736 [2] FLASHING  
28. 475-9737 [1] RUBBER  
29. 475-9738 [1] FLASHING  
30. 475-9739 [1] PLATE  
31. 475-9740 [4] PLATE  
32. 476-2080 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
33. 476-2085 [1] FLASHING  
34. 483-8730 [1] SHEET AS  
35. 483-8731 [1] SHEET AS  
36. 497-8790 [1] PLATE AS  
  7T-1099 [1] LINK  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
37. 497-8791 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
38. 497-8792 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
39. 497-8793 [1] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
40. 497-8794 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
41. 497-8801 [2] FLASHING  
42. 497-8802 [2] FLASHING  
43. 497-8803 [2] PLATE-RETAINER  
44. 497-8804 [6] PLATE-RETAINER  
45. 498-6593 [1] HOPPER AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
46. 095-0881 [1] PIN-SPRING  
47. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
48. 131-3540 M [22] LOCKNUT (M8X1.25-THD)  
49. 190-4375 [4] WASHER (26X40X2-MM THK)  
50. 193-8340 M [8] BOLT-CARRIAGE (M16X2X65-MM)  
51. 287-2499 M [4] NUT (M24X2-THD)  
52. 329-3356 M [2] NUT (M12X1.75-THD)  
53. 344-5674 M [2] NUT (M8X1.25-THD)  
54. 344-5675 M [4] NUT (M10X1.5-THD)  
55. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
56. 6V-7676 M [4] NUT (M24X3-THD)  
57. 7X-7729 [95] WASHER (11X25X3-MM THK)  
58. 8T-0389 M [16] LOCKNUT (M10X1.5-THD)  
59. 8T-4001 M [5] NUT (M24X3-THD)  
60. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
61. 8T-4132 M [8] NUT (M16X2-THD)  
62. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
63. 8T-4139 M [40] BOLT (M12X1.75X30-MM)  
64. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
66. 8T-4193 M [8] BOLT (M16X2X50-MM)  
68. 8T-4222 [11] WASHER-PLATED (11X32X2.5-MM THK)  
69. 8T-4223 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
70. 8T-4224 [44] WASHER-HARD (8.8X16X2-MM THK)  
71. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
72. 8T-5005 M [16] BOLT (M10X1.5X70-MM)  
73. 8T-5878 M [4] BOLT (M24X3X80-MM)  
74. 8T-6912 M [22] BOLT (M8X1.25X50-MM)  
75. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
76. 8T-8549 M [4] LOCKNUT (M12X1.75-THD)  
77. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
78. 513-4565 [1] PLATE AS (LH)  
  7T-1099 [1] LINK  
79. 513-4566 [1] PLATE AS (RH)  
80. 8T-0722 M [40] BOLT-LOCKING (M10X1.5X30-MM)  
81. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
82. 8T-0441 M [3] BOLT (M10X1.5X45-MM)  
83. 161-7632 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
84. 465-4955 [1] FITTING-GREASE  
85. 541-1678 [2] ROLLER-GUIDE  
86. 8T-4201 M [22] BOLT-LOCKING (M10X1.5X20-MM)  
87. 572-1728 [2] PLATE  
88. 392-4169 [1] FILM-NOTICE (SHIPPING)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#M01011140376
 

500-1611: CONVEYOR GP

500-1611 CONVEYOR GP
S/N 8RF1-UP
FOLDING
PART OF 374-1367 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i06589591 M0101114
5001611 CONVEYOR GP Parts scheme 5001611 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0104 [22] DOWEL-HOLLOW  
2. 115-4360 [8] RING-RETAINING  
3. [6] PLATE  
4. [1] BELT-CONVEYOR  
5. 543-2998 [7] ROLLER GP  
6. 382-9640 [2] BEARING AS  
    (EACH INCLUDES)
  5B-0935 [1] FITTING-GREASE  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
7. [2] COVER  
8. [1] COVER  
9. 541-1678 [2] ROLLER-GUIDE  
10. 386-4203 [1] BEARING AS  
  195-3836 M [2] SETSCREW (M10X1X10-MM)  
11. [1] PLATE-MOUNTING  
12. 388-9556 [1] PULLEY AS  
13. [1] PLATE  
14. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
15. 399-0228 [2] GUARD GP-CONVEYOR  
    (EACH INCLUDES)
  352-2979 J [1] LATCH AS  
  160-8499 M [2] NUT (M12X1.5-THD)  
  326-0612 [2] WASHER-TAB  
  5C-2890 M [4] NUT (M6X1-THD)  
  1H-3244 [4] LOCKWASHER  
  366-0082 [1] PAWL  
  468-0420 [1] GUARD AS  
16. [2] STUD  
18. 434-6416 [1] PULLEY GP-HEAD  
18A. 385-8533 [2] BUSHING  
  434-6417 [1] PULLEY AS  
  434-6418 [1] SHAFT  
19. 528-5017 [3] IDLER-RETURN  
20. 538-7252 [1] GUARD AS (RH)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
21. 538-7253 [1] GUARD AS (LH)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
22. 466-4180 [2] LINKAGE AS (REAR)  
    (EACH INCLUDES)
22A. 467-5855 [1] BUSHING  
  466-5005 [1] LINKAGE AS  
23. 466-4190 [6] PIN-LINKAGE  
24. 466-4995 [1] LINKAGE AS (FRONT, LH)  
25. 466-5010 [1] LINKAGE AS (FRONT, RH)  
26. 467-5850 [2] SHAFT-LINKAGE  
28. 470-0130 [1] FRAME AS-CONVEYOR  
  7T-1099 [10] LINK  
  355-8941 M [8] NUT-WELD (M16X2-THD)  
29. 526-6348 [1] FRAME AS-CONVEYOR  
30. 543-2999 [4] ROLLER (CENTER)  
31. 543-3000 [8] ROLLER GP (SIDE)  
32. 475-9736 [2] FLASHING  
33. 475-9737 [1] RUBBER  
34. 475-9738 [1] FLASHING  
35. 475-9739 [1] PLATE  
36. 475-9740 [4] PLATE  
37. 476-2080 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
38. 476-2085 [1] FLASHING  
39. 478-5298 [1] SHEET AS  
40. 478-5299 [1] SHEET AS  
41. 497-8790 [1] PLATE AS  
  7T-1099 [1] LINK  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 497-8791 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
43. 497-8792 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
44. 497-8793 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
45. 497-8794 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
46. 497-8801 [2] FLASHING  
47. 497-8802 [2] FLASHING  
48. 497-8803 [2] PLATE-RETAINER  
49. 497-8804 [6] PLATE-RETAINER  
50. 497-9970 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
51. 497-9971 [1] PLATE AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
52. 498-6593 [1] HOPPER AS  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
53. 095-0881 [1] PIN-SPRING  
54. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
55. 131-3540 M [22] LOCKNUT (M8X1.25-THD)  
56. 190-4375 [4] WASHER (26X40X2-MM THK)  
57. 193-8340 M [8] BOLT-CARRIAGE (M16X2X65-MM)  
58. 287-2499 M [4] NUT (M24X2-THD)  
59. 344-5674 M [2] NUT (M8X1.25-THD)  
60. 344-5675 M [4] NUT (M10X1.5-THD)  
61. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
62. 6V-8144 [6] RING-RETAINING  
63. 7X-0537 [6] WASHER-HARD (40.5X67X6-MM THK)  
64. 7X-0597 [10] WASHER-HARD (31X56X4-MM THK)  
65. 7X-2554 M [2] BOLT (M16X2X70-MM)  
66. 7X-2563 M [2] BOLT (M20X2.5X60-MM)  
67. 7X-7729 [95] WASHER (11X25X3-MM THK)  
68. 8T-0389 M [16] LOCKNUT (M10X1.5-THD)  
69. 8T-4001 M [5] NUT (M24X3-THD)  
70. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
71. 8T-4131 M [2] NUT (M20X2.5-THD)  
72. 8T-4132 M [10] NUT (M16X2-THD)  
73. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
74. 8T-4139 M [40] BOLT (M12X1.75X30-MM)  
76. 8T-4193 M [8] BOLT (M16X2X50-MM)  
78. 8T-4222 [11] WASHER-PLATED (11X32X2.5-MM THK)  
79. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
80. 8T-4224 [44] WASHER-HARD (8.8X16X2-MM THK)  
81. 8T-5005 M [16] BOLT (M10X1.5X70-MM)  
82. 8T-6912 M [22] BOLT (M8X1.25X50-MM)  
83. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
84. 8T-8549 M [4] LOCKNUT (M12X1.75-THD)  
85. 465-4955 [1] FITTING-GREASE  
86. 513-4565 [1] PLATE AS (LH)  
  7T-1099 [1] LINK  
87. 513-4566 [1] PLATE AS (RH)  
88. 161-7632 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
89. 8T-0441 M [3] BOLT (M10X1.5X45-MM)  
90. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
91. 8T-0722 M [40] BOLT-LOCKING (M10X1.5X30-MM)  
92. 8T-4201 M [22] BOLT-LOCKING (M10X1.5X20-MM)  
93. 572-1728 [2] PLATE  
94. 392-4165 [1] FILM-NOTICE (SHIPPING NOTICE)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#M01011140377
 

568-0076: CONVEYOR GP

568-0076 CONVEYOR GP
S/N 8RF1-UP
PART OF 374-1265 CONVEYOR AR
AN ATTACHMENT
i07515853 M0101114
5680076 CONVEYOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 399-5658 Y [1] BELT TENSIONER GP (GREASE)  
2. 500-1312 Y [1] CONVEYOR GP  
3. 568-0077 Y [1] LINES GP-CONVEYOR  
4. 568-0078 Y [1] MOTOR & MOUNTING GP (CONVEYOR)  
5. 568-0080 Y [1] LINES GP-WATER  
  Y   SEPARATE ILLUSTRATION
 

#M01011140378
 

565-7843: DRIVE GP-ROTOR

565-7843 DRIVE GP-ROTOR
S/N 8RF1-UP
PART OF 390-2865 MOUNTING GP-AUX DRIVE MOTOR
AN ATTACHMENT
i07582145 M0101114
5657843 DRIVE GP-ROTOR Parts scheme 5657843 DRIVE GP-ROTOR Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
2. 2H-3931 [1] SEAL-O-RING  
3. 3K-0715 [1] SEAL-O-RING  
4. 568-5410 [1] BUSHING  
5. 101-7398 M [6] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
6. 513-7029 [1] SEAL-LIP TYPE  
7. 495-0448 [1] SPACER (160X179.5X0.3-MM THK)  
8. 495-0447 [1] SPACER (160X179.5X0.2-MM THK)  
9. 287-4136 [1] BEARING  
10. 495-0445 [1] SPACER (85X105X131.5-MM THK)  
11. 495-0446 [1] SPACER (165X180X131.5-MM THK)  
12. 496-0540 [1] BEARING-ROLLER  
13. 568-5409 [1] SHAFT-DRIVE  
14. 495-0444 [1] COUPLING  
15. 095-0940 [1] RING-RETAINING (INTERNAL)  
16. 133-2905 [1] RING-RETAINING (EXTERNAL)  
17. 495-0443 [1] SPACER (120X151X5-MM THK)  
18. 224-6080 [1] SEAL-O-RING  
19. 264-1117 M [17] BOLT-SOCKET HEAD (M14X2X150-MM)  
20. 459-4708 [2] PLUG-BREATHER  
21. 7S-8561 [2] SEAL-O-RING  
22. 495-0439 [1] PAD  
23. 512-2214 [1] GEAR-SUN (22-TEETH)  
24. 512-2213 [1] GEAR-SUN (21-TEETH)  
25. 496-0537 [3] PIN  
26. 8T-3957 M [5] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
27. 512-2212 [1] GEAR-SUN (28-TEETH)  
28. 495-0440 [1] NUT-RING  
29. 496-0538 [2] BEARING-ROLLER  
30. 510-8809 [2] PLUG  
31. 543-5315 [2] PLUG AS  
    (EACH INCLUDES)
  451-2767 [1] SEAL  
32. 495-0441 [1] SPACER (260X275X35-MM THK)  
33. 305-7976 [1] SEAL GP-DUO-CONE  
34. 568-5411 [1] COVER  
35. 568-5412 [1] FLANGE  
36. 568-5413 [1] PLATE-END  
  M   METRIC PART
 

#M01011140379
 

391-0227: HUB GP-SHAFT

391-0227 HUB GP-SHAFT
S/N 8RF1-UP
PART OF 558-2141 SPRAY AR-WATER
i06275511 M0101114
3910227 HUB GP-SHAFT Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 391-0313 [1] FLANGE  
2. 391-0314 [1] PLATE  
3. 391-0969 Y [1] HUB GP-SHAFT  
4. 178-8473 M [12] BOLT-SOCKET HEAD (M24X3X60-MM)  
5. 2R-0098 [1] SEAL-O-RING  
6. 8T-4123 [12] WASHER (22X35X3.5-MM THK)  
7. 8T-4141 M [12] BOLT (M20X2.5X70-MM)  
8. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Mixing Chamber
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Disassembly and Assembly
Rotor Chamber - Remove and Install
PM620 and PM622 Cold Planer Machine Systems
Wear Plate (Rotor Chamber) - Remove and Install
PM620 and PM622 Cold Planer Machine Systems

Caterpillar Parts SIS Catalog WEG :

CABLE GP-CONVEYOR
374-1370 CABLE GP-CONVEYOR
BIT AS-CUTTER
460-7190 BIT AS-CUTTER
BIT AS-CUTTER
222-7571 BIT AS-CUTTER
BELT TENSIONER GP
399-5658 BELT TENSIONER GP
ANTISLAB & MOUNTING GP
521-6079 ANTISLAB & MOUNTING GP
VALVE GP-SOLENOID
476-7110 VALVE GP-SOLENOID
VALVE GP-PUMP CONTROL
462-1143 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
421-1062 VALVE GP-PUMP CONTROL
374-1265 CONVEYOR AR
374-1367 CONVEYOR AR-SECOND STAGE
374-1368 CONVEYOR AR-SECOND STAGE
CONVEYOR GP
500-1312 CONVEYOR GP
CONVEYOR GP
500-1313 CONVEYOR GP
CONVEYOR GP
500-1611 CONVEYOR GP
CONVEYOR GP
568-0076 CONVEYOR GP
DRIVE GP-ROTOR
565-7843 DRIVE GP-ROTOR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.