AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

277-2006 MOTOR GP-POWER ADJUSTER S/N 8RF1-UP 24-VOLT PART OF 388-1047 MOTOR GP-ELECTRIC AN ATTACHMENT WEG



IMPLEMENTS
ACTUATOR GP
MOUNTING GP
CONVEYOR GP
CHAMBER GP
ROTOR GP
DRIVE GP-ROTOR

GENERATOR WEG GENERATOR 8RF
 PM620 Cold Planer 8RF00001-UP POWERED BY C18 Engine M0101114 WEG 8RF   (1986)

IMPLEMENTS

ACTUATOR GP
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
 

#M01011140400
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
S/N 8RF1-UP
24-VOLT
PART OF 388-1047 MOTOR GP-ELECTRIC
AN ATTACHMENT
i06272308 M0101114
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE (12.8X16X19-MM THK)  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE (9.6X12.8X9.5-MM THK)  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M01011140401
 

390-2865: MOUNTING GP-AUX DRIVE MOTOR

390-2865 MOUNTING GP-AUX DRIVE MOTOR
S/N 8RF1-UP
PART OF 374-1269 POWER TRAIN AR
AN ATTACHMENT
i07582144 M0101114
3902865 MOUNTING GP-AUX DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 382-3747 [1] SHEAVE  
2. 565-7843 CY [1] DRIVE GP-ROTOR  
3. 2R-0098 [1] SEAL-O-RING  
4. 7X-0531 [12] WASHER-HARD (31X52.5X6-MM THK)  
5. 8F-3895 [12] BOLT (1-1/8-12X4-IN)  
6. 8T-4123 [24] WASHER (22X35X3.5-MM THK)  
7. 8T-4141 M [24] BOLT (M20X2.5X70-MM)  
8. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01011140402
 

390-2872: MOUNTING GP-COUPLING

390-2872 MOUNTING GP-COUPLING
S/N 8RF1-UP
PART OF 374-1269 POWER TRAIN AR
AN ATTACHMENT
i06590471 M0101114
3902872 MOUNTING GP-COUPLING Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-6565 [8] BOLT (1/2-13X1.125-IN)  
2. 7X-0584 [8] WASHER-HARD (13.5X20.5X2-MM THK)  
 

#M01011140403
 

374-1400: PIVOT GP-CONVEYOR

374-1400 PIVOT GP-CONVEYOR
S/N 8RF1-UP
PART OF 374-1265 CONVEYOR AR
AN ATTACHMENT
i06214344 M0101114
3741400 PIVOT GP-CONVEYOR Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 465-3430 [1] PIVOT AS  
  6V-5202 [4] RING  
1A. 386-4205 [2] BEARING  
1B. 415-1171 [2] BEARING  
  470-0145 [1] PIVOT AS  
2. 465-4580 [2] WASHER-THRUST  
3. 465-4581 [2] DISC  
4. 8T-5379 M [2] BOLT (M24X3X50-MM)  
5. 8Y-7119 [2] WASHER (26X144X12-MM THK)  
6. 467-8834 [2] SHIM (2-MM THK)  
7. 8T-4167 B [1] WASHER-HARD (26X44X4-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#M01011140404
 

557-9048: PLATE GP-ROTOR

557-9048 PLATE GP-ROTOR
S/N 8RF1-UP
PART OF 558-2141 SPRAY AR-WATER
i07595511 M0101114
5579048 PLATE GP-ROTOR Parts scheme 5579048 PLATE GP-ROTOR Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4185 M [10] BOLT (M10X1.5X50-MM)  
2. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
3. 8T-4174 M [4] BOLT (M16X2X120-MM)  
4. 8T-7338 M [2] BOLT (M16X2X45-MM)  
5. 7X-7729 [22] WASHER (11X25X3-MM THK)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4132 M [4] NUT (M16X2-THD)  
8. 8T-4133 M [18] NUT (M10X1.5-THD)  
9. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
10. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
11. 8T-4194 M [12] BOLT (M12X1.75X50-MM)  
12. 8T-4223 [36] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-4226 [18] WASHER-PLATED (10.5X45X3-MM THK)  
14. 8T-4244 M [12] NUT (M12X1.75-THD)  
15. 386-4426 [2] PLATE  
16. 386-4432 [1] PLATE AS  
17. 386-4436 [1] PLATE AS  
18. 386-4500 [2] BELT  
19. 386-9914 [2] BELT  
20. 520-1034 [1] PLATE AS  
21. 533-4799 [2] BLOCK  
22. 557-6351 [1] PLATE AS-SIDE  
23. 557-9043 [1] PLATE AS-SIDE  
24. 562-9303 [1] GUARD  
25. 562-9317 [1] SKI AS  
26. 562-9332 [1] SKI AS  
27. [1] INDICATOR  
28. 7X-2552 M [6] BOLT (M16X2X30-MM)  
29. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#M01011140405
 

510-5651: ROTOR AS

510-5651 ROTOR AS
S/N 8RF1-UP
PART OF 510-5650 ROTOR GP
AN ATTACHMENT
i07451372 M0101114
5105651 ROTOR AS Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-7082 [262] BLOCK  
2. 266-6037 [524] PIN-DOWEL  
3. 271-9980 [3] BLOCK (RH)  
4. 271-9981 [3] BLOCK (LH)  
5. 340-8494 [262] PIN  
6. 341-0972 [2] PLATE  
7. 358-5375 [2] PLATE  
8. 510-5656 [18] PLATE AS  
 

#M01011140406
 

542-0779: ROTOR AS

542-0779 ROTOR AS
S/N 8RF1-UP
2-METER
PART OF 507-0141, 532-9944 ROTOR GP
AN ATTACHMENT
i07445214 M0101114
5420779 ROTOR AS Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-9970 [12] PLATE  
2. 341-0972 [2] PLATE  
3. 358-5375 [2] PLATE  
4. 541-7555 [3] BLOCK (RH)  
5. [3] BLOCK (LH)  
6. 502-5474 [6] BLOCK  
7. 502-5475 [6] BLOCK  
8. 523-3970 [154] BLOCK  
9. 6B-6863 [308] PIN-SPRING  
 

#M01011140407
 

394-6417: ROTOR GP

394-6417 ROTOR GP
S/N 8RF1-UP
2-M
PART OF 399-5679 ROTOR GP
AN ATTACHMENT
i07503611 M0101114
3946417 ROTOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 560-2306 C [178] BIT AS-CUTTER  
2. 506-0013 [160] HOLDER  
3. 253-3774 [12] PLATE AS  
4. 283-1348 [3] PLUG  
5. 394-6418 Y [1] ROTOR GP  
6. 095-0884 [160] PIN-SPRING  
7. 176-5311 M [36] LOCKNUT (M16X2-THD)  
8. 6V-0409 [3] SEAL-BONDED  
9. 8T-4175 M [36] BOLT (M16X2X90-MM)  
10. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  569-0296 Y [1] KIT-ROTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01011140408
 

394-6418: ROTOR GP

394-6418 ROTOR GP
S/N 8RF1-UP
PART OF 394-6417 ROTOR GP
AN ATTACHMENT
i06283954 M0101114
3946418 ROTOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-7082 [160] BLOCK  
2. 266-6037 [320] PIN-DOWEL  
3. 271-9970 [12] PLATE  
4. 271-9980 [3] BLOCK (RH)  
5. 271-9981 [3] BLOCK (LH)  
6. 290-1039 [58] BLOCK  
7. 290-1040 [58] BLOCK  
8. 298-8089 [3] BLOCK  
9. 298-8090 [3] BLOCK  
10. 298-8091 [4] BLOCK  
11. 338-8789 [38] ROD  
12. 340-8494 [122] PIN  
13. 341-0972 [2] PLATE  
14. 353-2284 [1] BLOCK  
15. 358-5375 [1] PLATE  
16. 367-9291 [1] BLOCK  
17. 368-0590 [2] BLOCK  
18. 368-0591 [1] BLOCK  
19. 368-0593 [1] BLOCK  
20. 375-4122 [1] BLOCK  
21. 375-4126 [1] BLOCK  
22. 375-4127 [1] BLOCK  
23. 375-4129 [1] BLOCK  
24. 375-4131 [1] BLOCK  
25. 375-4133 [1] BLOCK  
26. 375-4135 [1] BLOCK  
27. 375-4137 [1] BLOCK  
28. 375-4139 [1] BLOCK  
29. 375-4141 [1] BLOCK  
30. 375-4966 [1] BLOCK  
31. 375-4968 [1] BLOCK  
32. 375-4970 [1] BLOCK  
33. 375-4972 [1] BLOCK  
34. 375-4976 [1] BLOCK  
35. 375-4978 [1] BLOCK  
36. 375-4981 [1] BLOCK  
37. 375-4984 [1] BLOCK  
38. 375-4986 [1] BLOCK  
39. 375-4989 [1] BLOCK  
40. 375-5212 [1] BLOCK  
41. 375-5217 [1] BLOCK  
42. 375-5221 [1] BLOCK  
43. 375-5225 [1] BLOCK  
44. 375-5229 [1] BLOCK  
45. 375-5232 [1] BLOCK  
46. 375-5234 [1] BLOCK  
47. 375-5236 [1] BLOCK  
48. 376-0382 [1] BLOCK  
49. 376-0384 [1] BLOCK  
50. 376-0386 [1] BLOCK  
51. 376-3375 [1] BLOCK  
52. 376-3404 [1] BLOCK  
53. 376-3418 [1] BLOCK  
 

#M01011140409
 

399-5679: ROTOR GP

399-5679 ROTOR GP
S/N 8RF1-UP
AN ATTACHMENT
i06280397 M0101114
3995679 ROTOR GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 394-6417 Y [1] ROTOR GP  
   
  480-9023 F [1] TOOL-REMOVAL  
  539-6298 F [1] PULLER-BIT  
  539-6299 F [1] PULLER-BIT  
  543-5470 F [1] BIT AS-CUTTER  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog WEG :

MOLDBOARD GP
374-1401 MOLDBOARD GP
LINES GP-MOTOR
378-8252 LINES GP-MOTOR
LINES GP-MOTOR
374-1375 LINES GP-MOTOR
LINES GP-CONVEYOR MOTOR
374-1336 LINES GP-CONVEYOR MOTOR
569-5438 KIT-ROTOR
569-5437 KIT-ROTOR
569-5436 KIT-ROTOR
569-0296 KIT-ROTOR
MOUNTING GP-AUX DRIVE MOTOR
390-2865 MOUNTING GP-AUX DRIVE MOTOR
MOUNTING GP-COUPLING
390-2872 MOUNTING GP-COUPLING
PIVOT GP-CONVEYOR
374-1400 PIVOT GP-CONVEYOR
PLATE GP-ROTOR
557-9048 PLATE GP-ROTOR
ROTOR AS
510-5651 ROTOR AS
ROTOR AS
542-0779 ROTOR AS
ROTOR GP
394-6417 ROTOR GP
ROTOR GP
394-6418 ROTOR GP
Back to top