OPERATOR STATION
SEAT GPCONTROL GP-BRAKE
WASHER GP-WINDOW
OPERATOR STATION
SEAT GP
#MEBP17580410
8Y-3910: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7877 CBE | STRIP-EDGE | ||
| 2. | 9C-5325 C | [1] | CUSHION AS-SEAT | |
| 3. | 9C-5324 C | [1] | CUSHION AS-BACK | |
| 4. | 6W-1895 | [1] | BAR | |
| 5. | 6W-1890 | [1] | BAR AS | |
| 6. | 9C-1587 | [1] | LEVER | |
| 7. | 9X-6624 | [4] | BOLT | |
| 8. | 033-4843 | [4] | NUT (5/16-18-THD) | |
| 9. | 6W-9693 | [2] | ADJUSTER AS | |
| 10. | 6W-2373 | [1] | SPRING | |
| 11. | 119-0036 | [4] | SCREW-FLAT HEAD (5/16-18X0.875-IN) | |
| 12. | 9V-7437 | [1] | SHELL AS | |
| 13. | 9S-2544 | [4] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 14. | 6W-5757 | [1] | CLIP | |
| 15. | 6W-3309 | [1] | HOLDER | |
| 16. | 8T-7565 | [7] | RIVET-POP | |
| 17. | 5P-7957 | [1] | LANYARD | |
| 18. | 6W-5740 C | [1] | CAP | |
| 19. | 7X-7739 C | [4] | WASHER (9.7X25.4 X4-MM THK) | |
| 20. | 5B-6172 | [4] | WASHER (9.7X19X0.8-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#MEBP17580411
8Y-3911: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-3910 Y | [1] | SEAT GP-SUSPENSION | |
| 2. | 9V-7446 | [1] | ARMREST AS (RH) | |
| 9V-7453 | [1] | BRACKET (RH) | ||
| 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | ||
| 3. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 9V-7452 | [1] | SPACER | ||
| 4. | 9V-7447 | [1] | PAD AS | |
| 5. | 9V-7454 | [1] | ARMREST AS (LH) | |
| 9V-7458 | [1] | BRACKET (LH) | ||
| 2K-6061 | [1] | SCREW-MACHINE (3/8-16X1.5-IN) | ||
| 6. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 9V-7452 | [1] | SPACER | ||
| 7. | 9V-7447 | [1] | PAD AS | |
| 8. | 9L-9814 | [4] | LOCKNUT | |
| 9. | 8Y-4006 YC | [1] | SUSPENSION GP-SEAT | |
| 10. | 9X-8276 M | [1] | BOLT (3/8-16X0.75-IN) | |
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP17580412
8X-2270: SUPPORT GP-SEAT
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-8093 | [4] | SPACER | |
| 2. | 2G-8096 | [4] | MOUNTING | |
| 3. | 4F-8711 | [2] | PLUG-BUTTON | |
| 4. | 5K-0906 | [4] | BOLT (5/16-18X0.625-IN) | |
| 5. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 7. | 5S-7383 | [4] | BOLT (3/8-16X1.75-IN) | |
| 8. | 6G-2641 | [1] | PAD | |
| 9. | 8W-1326 | [2] | ANGLE | |
| 10. | 8W-1327 | [1] | SUPPORT AS |
#MEBP17580413
6W-4923: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9V-3043 | [1] | LINK AS | |
| 2. | 6W-0108 | [1] | LINK AS | |
| 3. | 4V-7872 | [1] | KNOB AS-ADJUSTMENT | |
| 4V-7873 | [1] | KNOB | ||
| 4V-7877 | [1] | SPRING | ||
| 5V-1483 | [1] | PIN-GROOVED | ||
| 4. | 4V-7874 | [1] | HANDLE AS | |
| 4V-7875 | [1] | HANDLE | ||
| 4V-7876 | [1] | SLEEVE | ||
| 5V-1474 | [1] | SCREW-FORMING (10-16X0.625-IN) | ||
| 5. | 6W-8214 | [4] | PAD-ROLLER | |
| 6. | 2K-9111 | [1] | PIN-SPRING | |
| 7. | 6W-8285 | [1] | SPRING | |
| 8. | 5H-3193 | [1] | PIN-SPRING | |
| 9. | 4V-8565 | [1] | INDICATOR | |
| 10. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 11. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 12. | 6W-1525 | [1] | SPACER | |
| 13. | 5V-1839 | [2] | LOCKNUT (1/2-13-THD) | |
| 14. | 4V-7884 | [1] | BEARING | |
| 15. | 4V-8577 | [4] | BEARING | |
| 16. | 4V-8576 | [2] | SHAFT | |
| 17. | 6W-1528 | [1] | SPACER | |
| 18. | 6W-1526 | [1] | SPACER | |
| 19. | 6W-1527 | [1] | SPACER | |
| 20. | 6W-1529 | [4] | ROLLER | |
| 21. | 6W-8281 | [4] | BUMPER | |
| 22. | 6W-1893 | [1] | ANGLE AS (RH) | |
| 23. | 5V-4855 | [4] | BOLT (1/2-13X0.75-IN) | |
| 24. | 5V-4846 | [1] | ARM AS | |
| 6H-7062 | [2] | SPACER (13.5X25X19-MM THK) | ||
| 5V-4845 | [2] | BEARING | ||
| 25. | 9V-8178 | [1] | HOUSING-UPPER | |
| 26. | 6W-1885 | [1] | CHANNEL AS | |
| 27. | 9V-7943 | [2] | SPRING | |
| 28. | 6W-1894 | [1] | ANGLE AS (LH) | |
| 29. | 2L-5893 | [1] | PIN-SPRING | |
| 30. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 31. | 6W-8235 | [1] | ABSORBER AS-SHOCK | |
| 32. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 6D-0047 | [1] | LOCKNUT | ||
| 33. | 6W-2914 | [1] | ANGLE | |
| 34. | 4V-7884 | [1] | BEARING | |
| 35. | 6W-8296 | [1] | BOOT | |
| 36. | 9V-6754 | [23] | FASTENER | |
| 37. | 9V-8177 | [1] | HOUSING-LOWER | |
| 38. | 6W-2915 | [1] | ANGLE | |
| 39. | 4V-7890 | [1] | SPRING | |
| 40. | 6W-0111 | [2] | LINK | |
| 41. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 4B-4278 | [8] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 42. | 4V-8566 | [1] | GEAR AS (100-TEETH) | |
| 4V-8561 | [1] | WASHER (16.2X50.8X0.8-MM THK) | ||
| 43. | 4V-8562 | [1] | PLATE AS | |
| 44. | 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | |
| 45. | 2K-9111 | [1] | PIN-SPRING | |
| 46. | 7V-5190 | [1] | GEAR AS (28-TEETH) | |
| 47. | 4V-8554 | [1] | BRACKET | |
| 48. | 1B-2693 | [2] | BOLT (1/4-20X0.62-IN) | |
| 027-3924 | [2] | LOCKNUT (1/4-20-THD) | ||
| 49. | 4V-7891 | [1] | LATCH AS | |
| 50. | 3J-5696 | [1] | PIPE | |
| 51. | 9C-2177 | [1] | CAP | |
| 52. | 6W-0590 | [1] | LEVER |
#MEBP17580414
6W-4923: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9V-3043 | [1] | LINK AS | |
| 2. | 6W-0108 | [1] | LINK AS | |
| 3. | 9C-1942 C | [1] | KNOB | |
| 4. | 8R-1883 C | [4] | ROLLER | |
| 5. | 8R-1876 C | [4] | PAD-ROLLER | |
| 6. | 2K-9111 | [1] | PIN-SPRING | |
| 7. | 6W-8285 | [1] | SPRING | |
| 8. | 5H-3193 | [1] | PIN-SPRING | |
| 9. | 4V-8565 | [1] | INDICATOR | |
| 10. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 11. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 12. | 6W-8281 | [4] | BUMPER | |
| 13. | 5V-1497 C | [2] | RETAINER | |
| 14. | 4V-7884 | [1] | BEARING | |
| 15. | 4V-8577 | [4] | BEARING | |
| 16. | 8R-1879 C | [2] | SHAFT | |
| 17. | 8R-1877 C | [1] | SPACER (13X19X35-MM THK) | |
| 18. | 8R-1878 C | [1] | SPACER (13X19X10-MM THK) | |
| 19. | 8R-1884 C | [1] | SPACER (13X19X25-MM THK) | |
| 20. | 6W-1893 | [1] | ANGLE AS (RH) | |
| 21. | 9C-5347 C | [4] | BOLT (1/2-13X0.75-IN) | |
| 22. | 5V-4846 | [1] | ARM AS | |
| 6H-7062 | [2] | SPACER (13.5X25X19-MM THK) | ||
| 5V-4845 | [2] | BEARING | ||
| 23. | 9V-8178 | [1] | HOUSING-UPPER | |
| 24. | 6W-1885 | [1] | CHANNEL AS | |
| 25. | 9V-7943 | [2] | SPRING | |
| 26. | 6W-1894 | [1] | ANGLE AS (LH) | |
| 27. | 2L-5893 | [1] | PIN-SPRING | |
| 28. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 29. | 8Y-3664 | [1] | ABSORBER AS-SHOCK | |
| 30. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 6D-0047 | [1] | LOCKNUT | ||
| 31. | 6W-2914 | [1] | ANGLE | |
| 32. | 4V-7884 | [1] | BEARING | |
| 33. | 6W-8296 | [1] | BOOT | |
| 34. | 9C-4457 C | [23] | FASTENER | |
| 35. | 9V-8177 | [1] | HOUSING-LOWER | |
| 36. | 6W-2915 | [1] | ANGLE | |
| 37. | 4V-7890 | [1] | SPRING | |
| 38. | 6W-0111 | [2] | LINK | |
| 39. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 4B-4278 | [8] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 40. | 4V-8566 | [1] | GEAR AS (100-TEETH) | |
| 4V-8561 | [1] | WASHER (16.2X50.8X0.8-MM THK) | ||
| 41. | 4V-8562 | [1] | PLATE AS | |
| 42. | 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | |
| 43. | 2K-9111 | [1] | PIN-SPRING | |
| 44. | 7V-5190 | [1] | GEAR AS (28-TEETH) | |
| 45. | 4V-8554 | [1] | BRACKET | |
| 46. | 1B-2693 | [2] | BOLT (1/4-20X0.62-IN) | |
| 027-3924 | [2] | LOCKNUT (1/4-20-THD) | ||
| 47. | 4V-7891 | [1] | LATCH AS | |
| 48. | 3J-5696 | [1] | PIPE | |
| 49. | 9C-2177 | [1] | CAP | |
| 50. | 6W-0590 | [1] | LEVER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17580415
8Y-4006: SUSPENSION GP-SEAT
8Y-4006 SUSPENSION GP-SEAT
S/N 11W1251-99999
PART OF 6W-2917, 8Y-3911 SEAT GP-SUSPENSION
S/N 11W1251-99999
PART OF 6W-2917, 8Y-3911 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-1884 | [1] | SPACER (13X19X25-MM THK) | |
| 2. | 6W-8281 | [4] | BUMPER | |
| 3. | 6W-0108 | [1] | LINK AS | |
| 4. | 3K-8584 | [1] | PIN-GROOVED | |
| 5. | 8R-1876 | [4] | PAD-ROLLER | |
| 6. | 8R-1883 | [4] | ROLLER | |
| 7. | 9V-3043 | [1] | LINK AS | |
| 8. | 9C-2177 | [1] | CAP | |
| 9. | 4V-7872 | [1] | KNOB AS-ADJUSTMENT | |
| 4V-7873 | [1] | KNOB | ||
| 4V-7874 | [1] | HANDLE AS | ||
| 5V-1474 | [1] | SCREW-FORMING (10-16X0.625-IN) | ||
| 4V-7876 | [1] | SLEEVE | ||
| 4V-7875 | [1] | HANDLE | ||
| 6V-3259 | [1] | PIN-SPRING | ||
| 4V-7877 | [1] | SPRING | ||
| 10. | 2K-9111 | [1] | PIN-SPRING | |
| 11. | 6W-0590 | [1] | LEVER | |
| 12. | 2L-5893 | [1] | PIN-SPRING | |
| 13. | 3J-5696 | [1] | PIPE | |
| 14. | 4V-7891 | [1] | LATCH AS | |
| 15. | 6W-8285 | [1] | SPRING | |
| 16. | 5H-3193 | [1] | PIN-SPRING | |
| 17. | 4V-8565 | [1] | INDICATOR | |
| 18. | 5M-3062 | [8] | BOLT (3/8-16X0.75-IN) | |
| 19. | 2K-4973 | [12] | LOCKNUT (3/8-16-THD) | |
| 20. | 4V-8561 | [1] | WASHER (16.2X50.8X0.8-MM THK) | |
| 21. | 5V-1497 | [2] | RETAINER | |
| 22. | 4V-7884 | [4] | BEARING | |
| 23. | 4V-8577 | [4] | BEARING | |
| 24. | 8R-1879 | [2] | SHAFT | |
| 25. | 8R-1877 | [1] | SPACER (13X19X35-MM THK) | |
| 26. | 8R-1878 | [1] | SPACER (13X19X10-MM THK) | |
| 27. | 9X-6270 | [2] | BOLT-SPECIAL | |
| 28. | 4V-8566 | [1] | GEAR AS (100-TEETH) | |
| 29. | 8Y-4646 | [2] | WASHER | |
| 30. | 5V-4846 | [1] | ARM AS | |
| 5V-4845 | [2] | BEARING | ||
| 31. | 8Y-4647 | [1] | HOUSING AS-UPPER | |
| 32. | 6W-1885 | [1] | CHANNEL AS | |
| 9V-7440 | [4] | NUT-WELD | ||
| 33. | 9V-7943 | [2] | SPRING | |
| 34. | 6W-1894 | [1] | ANGLE AS (LH) | |
| 35. | 4V-8562 | [1] | PLATE AS | |
| 36. | 9T-7303 | [1] | SPACER (16X28X1.5-MM THK) | |
| 37. | 8Y-3664 | [2] | ABSORBER AS-SHOCK | |
| 38. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 39. | 6D-0047 | [1] | LOCKNUT | |
| 40. | 6W-2914 | [1] | ANGLE | |
| 41. | 4V-7883 | [1] | FILM-INSTRUCTION (RIDE CONTROL) | |
| 42. | 6W-8296 | [1] | BOOT | |
| 43. | 9V-6754 | [25] | FASTENER | |
| 44. | 8Y-4648 | [1] | HOUSING AS (LOWER) | |
| 45. | 6W-2915 | [1] | ANGLE | |
| 46. | 4V-7890 | [1] | SPRING | |
| 47. | 6W-0111 | [2] | LINK | |
| 48. | 5B-6172 | [8] | WASHER (9.7X19X0.8-MM THK) | |
| 49. | 6W-1893 | [1] | ANGLE AS (RH) | |
| 50. | 9C-5347 | [4] | BOLT (1/2-13X0.75-IN) | |
| 51. | 1B-2693 | [2] | BOLT (1/4-20X0.62-IN) | |
| 52. | 027-3924 | [2] | LOCKNUT (1/4-20-THD) | |
| 53. | 4V-8554 | [1] | BRACKET | |
| 54. | 7V-5190 | [1] | GEAR AS (28-TEETH) |
#MEBP17580416
2G-8020: VALVE GP-AIR CONTROL
2G-8020 VALVE GP-AIR CONTROL
S/N 11W1251-99999
PART OF 9D-5000 CONTROL GP-CENTERSHIFT LOCK
S/N 11W1251-99999
PART OF 9D-5000 CONTROL GP-CENTERSHIFT LOCK
For full view, you need register
#MEBP17580417
5D-4382: VALVE GP-AIR CONTROL
5D-4382 VALVE GP-AIR CONTROL
S/N 11W1251-99999
PART OF 8W-2604, 8X-3697 CONTROL GP-PARKING BRAKE
S/N 11W1251-99999
PART OF 8W-2604, 8X-3697 CONTROL GP-PARKING BRAKE
For full view, you need register
#MEBP17580418
6G-8425: VALVE GP-AIR CONTROL
6G-8425 VALVE GP-AIR CONTROL
S/N 11W1251-99999
SERVICE BRAKE CONTROL
PART OF 2G-5780 CONTROL GP-SERVICE BRAKE
S/N 11W1251-99999
SERVICE BRAKE CONTROL
PART OF 2G-5780 CONTROL GP-SERVICE BRAKE
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-2694 | [3] | BOLT (5/16-18X2-IN) | |
| 3B-4505 | [3] | LOCKWASHER | ||
| 2. | 2G-8772 | [1] | BOOT | |
| 3. | 2G-6284 | [1] | PLUNGER | |
| 4. | 2G-6291 | [1] | SCREW | |
| 5. | 5B-3254 | [1] | NUT-JAM (7/16-20-THD) | |
| 6. | 2G-6286 | [1] | SPACER | |
| 7. | 5D-0768 | [1] | SPRING | |
| 8. | 6G-8416 | [1] | COVER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 2G-6285 | [1] | KIT-AIR CONTROL VALVE | ||
| (INCLUDING DIAPHRAGM, FILTER, INLET & EXHAUST VALVE, LOCKNUT, O-RINGS AND SPRINGS) | ||||
#MEBP17580419
6G-2570: WASHER GP-WINDOW
6G-2570 WASHER GP-WINDOW
S/N 11W1251-1294
PART OF 2C-8585 CAB AR, 8W-1416, 8W-2018 ROPS AR
ALSO AN ATTACHMENT
S/N 11W1251-1294
PART OF 2C-8585 CAB AR, 8W-1416, 8W-2018 ROPS AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 120G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-0935 | [1] | GASKET | |
| 2. | 4V-6981 C | [2] | SCREW-BUTTON HEAD (1/4-20X0.75-IN) | |
| 3. | 8W-0934 | [1] | BRACKET | |
| 4. | 8T-2901 | [1] | NOZZLE AS (WASHER) | |
| 5. | 9P-2369 | [1] | JET AS-WASHER | |
| 6. | 2V-3216 | [6] | CLIP | |
| 7. | 2N-3478 | [3] | SCREW-MACHINE (10-24X0.375-IN) | |
| 4B-4274 | [3] | WASHER (5.5X13X1.2-MM THK) | ||
| 8. | 5P-5992 BCD | [2] | HOSE | |
| 9. | 5P-5636 BCD | [2] | HOSE | |
| 10. | 8W-3278 C | [1] | PAD | |
| 11. | 4D-7388 C | [2] | CLIP | |
| 4L-6454 C | [1] | BOLT (3/8-16X1-IN) | ||
| 5P-1075 C | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 12. | 8X-1808 C | [1] | RESERVOIR AS | |
| 7T-1961 | [1] | CAP | ||
| 13. | 7T-8891 C | [2] | PUMP AS-WASHER | |
| 14. | 3V-7862 C | [1] | PLUG | |
| 2F-7608 C | [1] | CHAIN | ||
| 3B-4605 C | [1] | PIN-COTTER | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
