PIN, ARTICULATION LOCK 01008951 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-0510     Driver Group     1    
B     156-7100     Slide Hammer Puller Gp     1    Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00921216
Remove adapter (1) .
Illustration 2 g00921219
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove cover (2) , gasket (3) , spring (4) , and valve spool (5) .
Illustration 3 g00921232
Remove cover assembly (6) and the gasket.
Illustration 4 g00921234
Remove cover assembly (7) .
Illustration 5 g01050749
Use Tooling (A) to remove bearings (8) from cover assembly (7) .
Illustration 6 g00921264
Remove shaft assemblies (10) from body (9) .
Illustration 7 g01052070
Remove bearings (11) from body (9) . Tooling (B) may be necessary in order to remove bearing (8) that is located in the blind hole.