PIN 2374968 - Caterpillar

Illustration 1 g03396246
Left side view
Table 1
Specification for 276-5000 Window Wiper and Washer
Item Qty Part Specification Description
1 1 6V-7419 Wiper Blade Torque to 2.75 0.25 N m (24.34 2.21 lb in).
2 2 191-8921 Bolt Torque to 14 2 N m (124 18 lb in).
3 1 - Torque to 0.35 0.05 N m (3.10 0.44 lb in).
4 2 8T-5400 Connector As Torque to 0.35 0.05 N m (3.10 0.44 lb in).
5 - - Use the following procedure to install the wiper arm:
1. Tighten the nut to 21 1 N m (186 9 lb in).
2. Wait for minimum of 0.5 hours to 4 hours maximum.
3. Again, tighten the nut to 21 1 N m (186 9 lb in).
6 - - Torque to 38 2 N m (28 1 lb ft).
7 2 5C-9553 Bolt Torque to 9 1 N m (7 1 lb ft).
8 - - Torque to 9 1 N m (7 1 lb ft).
9 2 129-3178 Locknut Torque to 3.3 0.7 N m (29.2 6.2 lb in).
Illustration 2 g03396254
Table 2
Item Qty Part Specification Description
10 - - Torque to 7.5 1.0 N m (66.4 8.9 lb in).
C - - The distance of the wiper blade from the edge of the window in the park position is 132 3 mm (5.2 0.1 inch).
D - - Wiping angle from automatic parking position is 105 degrees.
E - - The distance of the wiper blade from the edge of the window in the park position is 52 3 mm (2.0 0.1 inch).
F - - Wiping angle from automatic parking position is 90 degrees.