PIN AS 2611205 - Caterpillar

Locate valve (A) in the pump compartment
Remove hose (B) from valve (A) .
Remove bolts that secure valve (A) .
Illustration 8 g03186537
(3) 328-2035 Solenoid Valve and Manifold Gp (5) 132-7551 Spacer (15) 8T-4121 Hard Washer (16) 8T-4198 Bolt
Install valve (3) onto the support.
Secure the valve (3) onto the valve (A). Use spacers (5), bolts (16) and washers (15) .
Illustration 9 g03344397
(B) Hose
Attach hose (B) to port "T" of valve (3) .
Illustration 10 g03344400
(2) 272-4139 Hose As (12) 5P-7462 Clip (13) 5P-7463 Clip (14) 6V-0683 Grommet
Attach hose (2) to port "C2" of valve (3) and port "P" of valve (A) .
Secure hose (2) with clips (12) and (13), and grommet (14) .
Illustration 11 g03188557
(1) 266-1135 Hose As (6) 148-8336 Connector As (10) 148-8424 Tee As
Attach hose (1) to port "P" of valve (3) .
Illustration 12 g03188957
(1) 266-1135 Hose As (6) 148-8336 Connector As (10) 148-8424 Tee As
Install connector (6), and tee (10) into the left-hand pump port.
Attach hose (1) onto the pump.
Attach harness (4) to the chassis harness that was originally connected to valve (A) .Note: Harness (4) splits the signal to both leads. Connect one lead to valve (A), and to valve (3) .Installed Views
Illustration 13 g03188958
422-2496 Lines Gp
Illustration 14 g03188959
422-2496 Lines Gp
Illustration 15 g03188977
422-2496 Lines Gp Schematic
Switch in the Locked Position, "solenoid de-energized"
Illustration 16 g03363339
Switch in the Locked Position, "solenoid de-energized" 422-2496 Lines Gp Switch in the Unlocked Position, "solenoid energized"
Illustration 17 g03363340
Switch in the Unlocked Position, "solenoid energized" 422-2496 Lines Gp