PIN AS 2810892 - Caterpillar

Removal Procedure
Start By:
Remove the piston pump (hydraulic fan). Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan) - Remove".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03683148
Disconnect harness assembly (1). Disconnect hose assemblies (2) and (3).
Illustration 2 g03683153
Disconnect hose assemblies (4) and (5). Reposition bracket assembly (6).
Illustration 3 g03683174
Attach a suitable lifting device to piston pump (7). The weight of piston pump (7) is approximately 52 kg (115 lb).
Remove bolts (8) in order to remove piston pump (7) from the machine.
Illustration 4 g03683322
Remove O-ring seal (9) from piston pump (7).