PIN AS 2874547 - Caterpillar

Illustration 4 g00573193
Note: Lubricate the bores of the seals with 5P-3975 Rubber Lubricant before the radiator cores are installed.Note: For installation purposes, assemble straps (12) to 13 radiator cores (13). Start with the radiator core at each channel and install the radiator cores toward the center of the radiator assembly. Install the radiator cores by alternating with the remaining thirteen radiator cores without straps (12).
Illustration 5 g00572201
Before bolts (11) are tightened, adjust gap (X) at the front of the radiator to 6.5 mm (0.25 inch). Before bolts (11) are tightened, adjust gap (Y) at the back of the radiator to 2.0 1.5 mm (0.08 0.06 inch).
Illustration 6 g00573194
Illustration 7 g00573195
Install 26 radiator cores (13). Assemble 31 bolts (11), the washers and 31 straps (12) to the upper tabs and the lower tabs on the front of 13 radiator cores (13). Repeat the assembly for the remaining tabs on the back of 13 radiator cores (13) .
Illustration 8 g00569195
Install 31 bolts (11) to the upper tabs and the lower tabs on the front of the radiator cores. Repeat the installation for the remaining tabs on the back of the radiator cores.
Illustration 9 g00573168
Install front strap (9) to the angles with four bolts (10) and the washers.
Illustration 10 g00573166
Install 26 bolts (8) and the washers that secure the radiator cores to front strap (9) .
Illustration 11 g00573165
Note: Rinse the inside of top tank (1) thoroughly after the top tank is cleaned. This will help to prevent contamination of the cooling system.Note: Lubricate seals (7) with 5P-3975 Rubber Lubricant prior to installation.
Install thirteen seals (7) to top tank (1) .
Illustration 12 g00573162
Note: Lubricate seals (6) with 5P-3975 Rubber Lubricant prior to installation.
Install 13 seals (6) to top tank (1) .
Illustration 13 g00573161
Note: Lubricate the bores of the seals with 5P-3975 Rubber Lubricant before the top tank (1) is installed.
Use Tooling (A), a suitable lifting device and a hoist to position top tank (1) for installation. The weight of top tank (1) is 140 kg (308 lb).
Illustration 14 g00573158
Secure the back of top tank (1) to the channel with five bolts (3) and the washers. Repeat the assembly for the remaining channel.
Illustration 15 g00573157
Secure the front of top tank (1) to the channel with five bolts (2) and the washers. Repeat the installation for the remaining channel.
Illustration 16 g00573160
Install three bolts (4) and the washers in order to secure shield (5) to top tank (1). Repeat the installation on the opposite side of the radiator.End By: Install the radiator. Refer to Disassembly and Assembly, "Radiator - Install".