PIN 4L9078 - Caterpillar

Installation Procedure
Table 1
Tools Needed    
Tool     Part Number     Part Description     Qty    
A     6V-2156     Link Bracket     1    
Illustration 1 g00479630
Install tooling (A), a lifting strap and a hoist onto the hydraulic tank. Place the hydraulic tank into position in the machine.
Illustration 2 g00479633
Install the washers and two bolts (32) that retain the sides of the hydraulic tank to the machine.
Illustration 3 g00479632
Install clip (30), the washers and two bolts (29) that retain the bottom of the hydraulic tank. Install wiring assembly (31) .
Illustration 4 g00479629
Install wiring assembly (28) .
Illustration 5 g00479628
Note: Replace worn seals. Replace damaged seals.
Install hose assemblies (21), (24), (25), (26) and (27) .
Install tube assembly (22). Tighten nut (23) .
Illustration 6 g00479627
Install tee fitting (19). Install tube assembly (17). Tighten nuts (18) and (20) .
Illustration 7 g00479626
Install clips (16). Install hose assemblies (10) and (11). Install flange assemblies (13) and (15). Install bolts (12) and (14) .
Install hose assemblies (8) and (9) .
Illustration 8 g00479625
Install clip (7). Install clamps (6), the washers and bolts (5) .
Illustration 9 g00479624
Install hose (1) and clamp (2). Install tube assembly (4) and nut (3) .
Fill the hydraulic tank with hydraulic oil to the correct level. Refer to the Operation and Maintenance Manual for the correct fluid type and the correct fluid quantity.,, End By:
Install the air cleaner. Refer to Disassembly and AssemblySENR6768-01, "Air Cleaner - Remove and Install".
Install the fuel tank. Refer to Disassembly and AssemblySENR6768-01, "Fuel Tank - Install".