9R4209 PIN Caterpillar parts
446
Rating:
Alternative (cross code) number:
CA9R4209
9R-4209
9R4209
CA9R4209
9R-4209
9R4209
Weight: 4 pounds 2 kg.
Information:
EFFECTIVE LENGTH
144
mm
HEAD OD
0
mm
OVERALL LENGTH
176
mm
PIN OD
45.103
mm
TRANSV HOLES
Y
DETENT BALL
N
END TYPE A
CHAMFER
END TYPE B
CHAMFER
GROOVE
N
HAND RING
N
HEAD THICKNESS
0
KEEPER SLOT
N
LUBE OUTLETS
N
BACKHOE LOADER,
Compatible equipment models: 9R4209:
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain" for the correct procedure.
Place a suitable container below the engine oil cooler in order to catch any fluids that might be spilled.
Illustration 1 g02704276
Remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install".
Remove bolts (1) from the assembly of engine oil cooler (2). Not the position of different length bolts. Do not remove bolts in Position (X). Note: Support the engine oil cooler as the bolts are removed.
Remove the assembly of engine oil cooler (2) from the cylinder block.
Remove gasket (3) (not shown). Disassembly Procedure
Illustration 2 g02704316
Remove bolts (4).
Remove cooler matrix (5) from spacer plate (7).
Remove gasket (6).
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain" for the correct procedure.
Place a suitable container below the engine oil cooler in order to catch any fluids that might be spilled.
Illustration 1 g02704276
Remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install".
Remove bolts (1) from the assembly of engine oil cooler (2). Not the position of different length bolts. Do not remove bolts in Position (X). Note: Support the engine oil cooler as the bolts are removed.
Remove the assembly of engine oil cooler (2) from the cylinder block.
Remove gasket (3) (not shown). Disassembly Procedure
Illustration 2 g02704316
Remove bolts (4).
Remove cooler matrix (5) from spacer plate (7).
Remove gasket (6).
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 1...
127, 129, 12E, 173B, 183B, 215, 225, 235, 25, 30/30, 3306, 3306B, 336D, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 35...
10 FT, 10B, 120, 120B, 12E, 140, 140B, 16, 2470C, 24M, 2570C, 2670C, 2864C, 323D L, 323D LN, 325D, 329D L, 330C, 330D, 330D L, 336D L, 336D LN, 345B, 345C, 345C L, 345D, 349D L, 365C L, 385C, 416, 416...
10 FT, 10-20B, 10B, 117, 118, 119, 120, 120B, 120G, 127, 128, 129, 12E, 12F, 12G, 130G, 140, 140B, 140G, 141, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 163, 1673, 16G, 16H, 16H NA, 16M, 172, 173B, 183, 18...
414E, 416, 416B, 416C, 416D, 416E, 420D, 422E, 424B, 424B HD, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 436C, 438C, 446
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436, 436C, 438C, 438D, 442D, 446, 446B, 446D
12G, 130G, 140G, 14G, 1693, 16G, 215, 225, 225D, 229, 229D, 231D, 3208, 3306, 3406, 3406B, 416, 416B, 426, 426B, 428, 428B, 436, 436B, 446, 446B, 528, 528B, 530B, 561B, 561C, 613C, 613C II, 613G, 621,...
10, 120, 120B, 120G, 120M, 12E, 12F, 12G, 12M, 130G, 1390, 140, 140B, 140G, 140M, 14E, 14G, 14M, 16, 160G, 160M, 163, 1673, 16G, 183B, 205, 206, 213B, 214B, 215, 215B, 224B, 225, 225D, 229D, 231D, 235...
120, 120B, 120M, 120M 2, 12E, 12F, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 14E, 14M, 160M, 160M 2, 160M 3 AWD, 16M, 320D FM, 426C, 428, 428B, 428C, 436C, 438C, 446, 446B, 446D, 46, 561B, 561C, 561...
446, 446B, 446D
235D, 245, 446, 446B, 446D, 450E, 450F, 7A, 7S, 8A, 8S, 8U, 973, 9A, 9S, D7G, D7G2
305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 416D, 420D, 430D, 446, 446B, 446D, 450E, 450F, 931C II, 933, 933C, E70B
9R4203
PIN AS
446
446
9R7883
PIN AS
446
446
416, 428
118, 120, 120G, 129, 12E, 12F, 130G, 140, 140G, 141, 14E, 14G, 153, 16, 163, 172, 173B, 183, 183B, 191, 225, 245, 41, 44, 46, 50, 517, 518, 518C, 527, 528, 528B, 530B, 561B, 561C, 561D, 561H, 571G, 57...
12M 2, 140M, 160M, 428, 518, 528, 539, 621, 621B, 623, 623B, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631D, 633D, 637, 637B, 637D, 637E, 637G, 639D, 641B, 650B, 657B, 666B, 769C, 773B,...
428
2J3758
PIN
446, 630A, 953C, 963C, 973, 973C, D4
446, 630A, 953C, 963C, 973, 973C, D4
9V3888
PIN
65, 75
65, 75
5G9523
PIN
65
65
8R8831
PIN
65, 75
65, 75
1F5074
PIN
65, 955C, D364, D4D, IT14B
65, 955C, D364, D4D, IT14B
9R6052
PIN
428
428