PLATE & FILM GP 1400129 - Caterpillar

Obtaining A Registration Key
Illustration 1 g01501951
Example of the Registration PageRefer to the following Steps in order to obtain the registration key for activating a new display.
Record the serial number that is located on the identification plate on the display.
Go to the following web site: "www.techproductregistration.com".Refer to Illustration 1 for an example of the registration form.Note: If access to the web site is not available, call 888-223-7539 in order to register the software manually.
Complete the registration form that is found on the web site.Note: You may need to refresh your internet browser window after entering information into fields.Refer to Special Instruction, REHS3666 for detailed information.
Select "Confirm".Within 30 minutes after completion of the form, an e-mail will be sent to the e-mail address of the dealer that was submitted on the form. This e-mail will have the registration key number that is needed in order to activate the display.
Provide the registration key number to the appropriate person in order to enter the number into the display.Save this information for future reference.Entering a Registration Key into the Display
Refer to the following steps in order to enter a registration key into the display.
Illustration 2 g01314647
Turn the key start switch of the machine to the "ON" position and press the power key in order to start the system.The display will power up. A screen that is similar to Illustration 2 will appear.
Illustration 3 g01314650
Illustration 4 g01314651
Perform one of the two options below:
Copy the file for the registration key to the root folder of the data card. Press "OK".
Enter the 24 character option key that was obtained. Use the arrow keys on the keypad of the display. Press "OK" key.If the process was successful, the "Option Keys File Loaded" dialog will appear. Refer to Illustration 4. This indicates that one option key has been loaded successfully.
Press the "OK" key.The "Plan View" appears.Note: If the key does not activate check the following:
Verify that the key was entered correctly.
Verify that the serial number that is located on the identification plate of the display is the same as the electronic serial number of the display.