PLATE-RH SIDE 3728241 - Caterpillar

Illustration 1 g03684184
Bottom view
Illustration 2 g03684185
Section A-A
Illustration 3 g03684186
Section B-B
Do not use caustic (corrosive) materials to clean any parts in this valve group. Caustic material will corrode and damage parts.
Pressures at low idle speed on a machine:Pilot pressure for the lockup clutch ... 1725 70 kPa (250 10 psi)Maximum pressure for the lockup clutch ... 1590 100 kPa (230 15 psi)Lockup clutch primary pressure ... 1100 35 kPa (160 5 psi) (1) Torque for nut ... 9.0 0.5 N m (80 4 lb in) (2) Refer to Specifications, "Solenoid Valve (Lockup Clutch)". Installation torque ... 50 5 N m (37 4 lb ft) (3) 8H-9190 Shim Thickness of shim ... 0.7620 mm (0.030 inch) Pressure change with one shim ... 143 kPa (20.8 psi) 8M-2932 Shim Thickness of shim ... 0.41 mm (0.0161 inch) Pressure change with one shim ... 77 kPa (11.1 psi) 5J-6153 Shim Thickness of shim ... 0.18 mm (0.0071 inch) Pressure change with one shim ... 33 kPa (4.8 psi) (4) 7M-7316 Spring Length under test force ... 37.3 mm (1.47 inch) Test force ... 265 13 N (60 3 lb) Free length after test ... 54.76 mm (2.156