PLATE AS 5062759 - Caterpillar

Select the "XMSN" option (7) from the "Maintenance" menu. The following window will appear.
Illustration 9 g00892691
This menu will allow you to adjust the current settings of the power train pump for the forward direction and the reverse direction. Press the function key that corresponds to the desired item.
Use the arrow keys to adjust the values.
Change the value for the "Trim transm on/off" parameter (1) to a value of "0" after you finish adjusting the values. This will avoid unauthorized adjustments."Enginespeed" (8) - This parameter shows the engine speed in revolution per minute (RPM)."Output:" (9) - This parameter shows the output current that flows from the IQAN to the power train pump."PT Motor" (10) - This parameter shows the speed of the power train motor in revolution per minute (RPM)."Max forward" (11) - This is the maximum current setting for the power train pump in the forward direction. When the accelerator pedal reaches the end of travel and the maximum speed potentiometer is set to 100%, the maximum current will flow from the IQAN. The maximum current should be adjusted so that the maximum speed of the machine corresponds to maximum travel of the accelerator pedal. If the maximum current is set too high, the accelerator pedal will not move all the way to reach maximum speed. If the maximum current is set too low, the machine will not move at maximum speed."Min forward" (12) - This is the minimum current setting for the power train pump in the forward direction. The minimum current should be adjusted so that the machine does not move during the initial movement of accelerator pedal. When the accelerator pedal is pushed slightly more the machine should begin to move. If the