PLATE AS 5120909 - Caterpillar

Measuring a Channel or Channel Type
Illustration 1 g00880097
"Measure" Menu (1) "Voltage in". (2) "Selected".When you select a channel type in the "Measure" menu, a measurement form is displayed with all of the channels of this type. For example, "Voltage in" (1) is selected.
Illustration 2 g00880105
Measurement Form (5) "Index" (6) "Channel name" (7) "Value" (8) "Unit" (9) "Status" (10) "Measure/Stop F4"Every row in the form represents a channel with the following information: "Index" (5), "Value" (7), "Unit" (8) and "Status" (9). The diode lamps are gray until measuring starts. The diode lamps are green, yellow or red during a measurement.
A green color indicates that everything is normal.
Yellow means that the channel is switched off.
Red means that permitted values are exceeded.You have the following two options in order to open the desired channel form:
Click on the arrow button to the left of "Value" box (7) .
Double-click on the channel nameTo measure individual channels in the measurement form, click on the desired channels. The channels are marked with a yellow line. Click on the yellow line in order to remove a channel from a measurement. This can be done during a measurement.Use one of the following methods in order to begin a measurement of the channels.
Click "Measure" button (10)