SEAL 2167238 - Caterpillar

This section contains samples of locations for the installation of the Product Link module on various machines. Other locations are possible. See Systems Operation, "System Installation" for guidelines when you are selecting the mounting location. Motor Grader
Illustration 1 g00785066
Installed Product Link module in cab on mounts for the radio When you are mounting the Product Link to the ROPS on a motor grader, refer to Service Magazine, SEPD046505 April 1999, "Acceptable Welding And Drilling Locations On ROPS Cab".. 988G Wheel Loader
Illustration 2 g00792934
Installed Product Link module by the fuse panelWheel Tractor-Scraper
On wheel tractor-scraper machines, the Product Link module can be mounted under the cab on the fender.
Illustration 3 g00673326
Remove the front cover (2) and remove the side cover (1) from the cab.
Illustration 4 g00673328
Installed Product Link module under the cab
Illustration 5 g00673330
Installed Product Link module on the fenderTrack-Type Loader
Illustration 6 g00673332
Installed Product Link module under the cab D5 Track-Type Tractor
Illustration 7 g00673486
Installed Product Link module near the fuse panel D6M Track-Type Tractor
Illustration 8 g00695514
Installed Product Link module behind panel on side of machine D250E Articulated Truck
Illustration 9 g00695517
Installed Product Link module on left hand side of operator's seat on D250E 769D Off Highway Truck
Illustration 10 g00695515
Installed Product Link module in the electrical compartment