SEAL-O-RING 2432737 - Caterpillar

The 6V3150 Engine Pressure Group, when used with the 6V2100 Multitach and a continuity indicator, replaces the former 4S6553 Engine Evaluation Test Group, which is no longer serviced. The 6V3150 Group can be used to check the performance of diesel and natural gas engines and make operating adjustments to natural gas engines. See Special Instruction Form SEHS7341, "USING THE 4S6553 ENGINE EVALUATION TEST GROUP" for reference information on the connection of the instrument to the engine and the test procedures necessary to check engine performance.The gauges in the 6V3150 Engine Pressure Group are "gauge" pressure instruments that indicate pressure relative to ambient atmospheric pressure. This type of gauge will read "zero" when the pressure port is open to the atmosphere. The 4S6997 Gauge in the former 4S6553 Engine Test Kit was an "absolute" pressure gauge that indicated pressure relative to absolute zero pressure. A gauge of this type reads atmospheric pressure, about 760 mm (30 inches) of mercury or 101 kPa (14.7 psi), when the pressure port is open to the atmosphere.Engine "boost" or manifold pressure is the difference between atmospheric pressure and the pressure in the engine intake manifold. The new 6V3150 Engine Pressure Group can read boost directly in kPa (use the chart in the lid to convert kPa to inches of mercury as shown in the Rack Setting Chart) without subtracting atmospheric pressure as was previously necessary when using the 4S6553 Engine Test Kit. List Of Components
1. 6V4036 Case2. 6V6055 Differential Pressure Gauge (formerly 5P6579)3. 6V6164 Pressure Gauge (formerly 6V4016)4. 6V6165 Pressure Gauge (formerly 6V4017)5. 6V6166 Pressure Gauge (formerly 6V4018)6. 3K6677 Fitting (eight)7. 5P5630 Tube, 16 mm (52.5 ft.)8. 5P2948 Connector (ten)9. 3K6675 Fitting (six)10. 4K9822 Nut (ten)11. 4K9821 Sleeve (ten)12. 6V6132 Cable Tie (five) (not shown)13. 6V6045 Case (one) (formerly 6V4075 Containers)14. 6V6115 Packing Set15. SEHS7860-01 Conversion Chart16. SEHS7815 Title Decal (on outside of lid)17. 5P2949 Connector (not shown)18. 6V3342 Pipe Elbow (not shown) 6V6045 and 6V6115 Replace the two former 6V4075 containers.Specifications
Operating Temperature Range: ... -1 to +60°C (30 to 140°F) for differential pressure gauges. ... -18 to +71°C (0 to 160°F) for all other gauges.Gauge Accuracy: 2% of full scale for differential pressure gauges.SAE Grade "A" (2% - 1% - 2%) for all other gauges.Overrange Pressures: 100 kPa (15 psi) for differential pressure gauges.Pressures above full scale will destroy accuracy of all other gauges.Operating Position: Differential Pressure Gauges - position has no effect on accuracy provided gauge has been mechanically adjusted to zero in the test position.All other gauges - position has no effect on accuracy.Pressure Medium: Differential pressure gauges - clean air and gases only (no fluids)All other gauges - air and liquids (oil, water, antifreeze, fuel etc.).Weight: 5 kg (11 lbs) without 6V3121 Multitach Group.Size: 394mm x 311mm x 140mm (15 1/2" x 12 1/4" x 5 1/2")Description Of Gauges
Pressure Gauges
6V6166 Pressure Gauge (1): This is a common pressure gauge that can be used to measure pressures of 0 to 400 kPa (0 to 60 psi) with an accuracy