SEAL-WEAR SLEEVE 3653180 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-9906     Ratchet Puller Gp     1    
B     138-7575     Link Bracket     1    Start By:
Remove the auxiliary hydraulic pump drive shaft. Refer to the Machine Systems, Disassembly and Assembly for the removal procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00528146
Disconnect two tube assemblies (1) and four hose assemblies (2) .
Illustration 2 g00528148
Attach Tooling (A) to the cab and pump (3), as shown.
Illustration 3 g00528150
Remove four bolts and washers (4). Remove power train oil pump (3) from the machine. The weight of the power train oil pump is approximately 75 kg (165 lb).