SEAL 6I6923 - Caterpillar

Illustration 1 g01216673
Illustration 1 shows :
That both sides of the blade need to be lowered (indicated by the down arrow symbol).
The Cut Left value means that, at the left blade tip, 0.09 m needs to be cut to reach the working surface.
The Cut Left field is colored green to indicate that the left blade tip is within tolerance for being on-grade.
The Cut Right value means that, at the right blade tip, 0.04 m needs to be cut from the current elevation to reach the working surface.
The Cut Right field is colored red to indicate that the right blade tip is off-grade; that is, not within the on-grade tolerance.
The Design Elev (100.26 m) is the final target level at the right blade tip (the tip that has focus).
The positive cross slope value, 0.0%, indicates that the blade is sloping up to the right.
Six satellites are being used to determine the position of the blade.Illustration 2 shows Text View 2 configured to show position information.
Illustration 2 g01216676
Illustration 2 shows:
Northing, easting, and elevation positions at the guidance point that has focus (right tip).
The guidance point that has focus (right tip) is 5.96 m from the start of the alignment.
The guidance point that has focus (right tip) is 2.38 m right of the master alignment.In order to see the offset from a selected alignment, set a Text View to show the Offline item.