SEAT GP 4896483 - Caterpillar

Illustration 2 g01243993
Position the engine and install bolts (28).
Illustration 3 g01243992
Install bolts (27) and (26).
Illustration 4 g01243990
Remove Tooling (C) from underneath generator (25).
Illustration 5 g01243979
Position rotor (23) and remove Tooling (A).
Illustration 6 g01243995
Check the crankshaft end play. Use Tooling (D) and a suitable prybar in order to check crankshaft end play. Position Tooling (D) against the front engine support and the vibration damper. The crankshaft should be 0.11 to 0.57 mm (0.004 to 0.022 inch). If end play needs to be adjusted add or remove shims. Refer to Disassembly and Assembly, "Coupling - Remove and Install".
Illustration 7 g01243978
Position screen (21) on the rear of the engine and tighten bolts (22).
Illustration 8 g01243973
Install tube (20).
Illustration 9 g01243971
Install tube (19).
Illustration 10 g01245221
Connect harness assembly (16). Connect hoses (15) and (17). Install tube (18).
Illustration 11 g01243964
Connect harness assembly (14).
Illustration 12 g01243960
Connect hose (13).
Illustration 13 g01243957
Install tube (12). Tighten the clamps on each end of tube (12). Connect hose assembly (10). Connect harness assemblies (9) and (11). Tighten the nut that holds wire assembly (11) to a torque of 6.0 0.6 N m (55 5 lb in). Install bolt (8). Tighten bolt (8) to a torque of 2.0 0.3 N m (20 2 lb in).
Illustration 14 g01243954
Connect harness assemblies (7) and (6). Install nuts (5) and (4). Tighten nut (5) to a torque of 31 4 N m (23 3 lb ft). Tighten nut (4) to a torque of 2.0 0.3 N m (20 2 lb in).
Illustration 15 g01243950
Connect hose assembly (3). Connect harness assembly (1). Install screw (2). Tighten screw (2) to a torque of 6 N m (54 lb in).
Refill the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Connect the negative battery cable. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Connect".End By:
Install the radiator fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Install the fan guard. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install".