125-1302 SWITCH GP-MAGNETIC 24-VOLT PART OF 231-1385 PANEL GP-CIRCUIT BREAKER 330C L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

0. 125-1302 SWITCH GP-

WIRING GP

1. 253-3234 WIRING GP-
2. 188-2647 WIRING GP-
3. 266-3350 WIRING GP-

FRAME AND BODY

ENCLOSURE GP

4. 190-3420 ENCLOSURE

FRAME GP

5. 253-3205 FRAME GP-U

OPERATOR STATION

CONTROL GP-HYDRAULIC

6. 216-6748 CONTROL GP
7. 216-6749 CONTROL GP

HYDRAULIC SYSTEM

GENERATOR GP-HYDRAULIC

8. 253-3213 INSTALLATI

LINES GP-HYDRAULIC

9. 188-2646 LINES GP-H
0. INFORMATION

EXCAVATOR 330C L EXCAVATOR DKY
330C L Factory Installed Right Front Corner Generator Set (247-5442 Generator Arrangement) DKY00001-UP (MACHINE) SEBC0660 330C L DKY (2001)

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

7N-0719 SWITCH GP-DISCONNECT

125-1302 SWITCH GP-MAGNETIC

#SEBC06600010

125-1302: SWITCH GP-MAGNETIC

SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC
24-VOLT
PART OF 231-1385 PANEL GP-CIRCUIT BREAKER

i01763082 SEBC0660

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	1H-3338	[2]	LOCKWASHER
4.	012-0380	[2]	LOCKWASHER
5.	5C-2890 M	[2]	NUT (M6X1-THD)
6.	9X-1813 BE		SLEEVE
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBC06600011

253-3234: WIRING GP-GRAPPLE CONTROL

WIRING GP-GRAPPLE CONTROL

253-3234 WIRING GP-GRAPPLE CONTROL
PART OF 253-3213 INSTALLATION AR-HYD GENERATOR

i02307377 SEBC0660

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
216-6748 Y	[1]	CONTROL GP-JOYSTICK (LH)
216-6749 Y	[1]	CONTROL GP-JOYSTICK (RH)
231-1385 Y	[1]	PANEL GP-CIRCUIT BREAKER
266-3350 Y	[1]	WIRING GP-HYDRAULIC GENERATOR
127-1116	[1]	FILM-INSTRUCTION (GRAPPLE, MAGNET)
	[1]	TAG
Y		SEPARATE ILLUSTRATION

#SEBC06600012

188-2647: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

188-2647 WIRING GP-HYDRAULIC GENERATOR
PART OF 253-3233 GENERATOR AR-HYDRAULIC

i01518022 SEBC0660

1882647 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	192-1761	[1]	HARNESS AS-LIGHTING (GENERATOR FLOOD)
2.	185-4242	[1]	HARNESS AS-POWER (GENERATOR DC)
	8T-6885 BE		TUBE-HEAT SHRINK
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS (1-PIN)
3.	166-4706	[1]	HARNESS AS-SOLENOID (GENERATOR HYDRAULIC MANIFOLD)
4.	185-4244	[1]	HARNESS AS-JUNCTION BOX (GENERATOR)
5.	194-0463	[1]	CABLE
6.	185-4245	[1]	HARNESS AS-JUNCTION BOX (GENERATOR)
7.	193-3125	[2]	CONNECTOR-CORD GRIP
8.	8W-4756	[3]	BUSHING-TERMINAL
9.	104-3650	[2]	BUSHING
10.	104-3648	[2]	BUSHING
11.	068-3708	[2]	NUT-SPECIAL
12.	191-5222	[2]	CONNECTOR
13.	123-6574	[2]	BUSHING
14.	6D-5801	[4]	NUT (8-32-THD)
15.	6P-0699	[1]	GROMMET
16.	180-7113	[1]	CONNECTOR
17.	062-5388	[2]	NUT-SPECIAL
18.	9M-4494	[2]	NUT-SPANNER
19.	4P-4890	[3]	NUT-SPECIAL
20.	135-1670	[2]	CONNECTOR
21.	135-1669	[2]	CONNECTOR
22.	5C-9553 M	[3]	BOLT (M6X1X16-MM)
23.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
24.	6V-7743 M	[3]	LOCKNUT (M6X1-THD)
25.	4B-4863	[8]	WASHER (4.7X11X1.2-MM THK)
26.	7S-1197	[4]	SCREW-MACHINE (8-32X0.5-IN)
27.	153-2521 Y	[1]	LAMP GP-FLOOD (24-VOLT)
28.	6L-5855	[1]	STRIP-TERMINAL
29.	3H-3627	[2]	SCREW-MACHINE (8-32X0.625-IN)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC06600013

266-3350: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

266-3350 WIRING GP-HYDRAULIC GENERATOR
PART OF 253-3234 WIRING GP-GRAPPLE CONTROL

i02307569 SEBC0660

2663350 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	235-4204	[1]	HARNESS AS-SWITCH (MAGNET)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
2.	146-0238	[1]	SWITCH AS-TOGGLE (ELECTRICAL CONTROL BACKUP)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
3.	204-4559	[1]	PLATE AS
5.	241-4229	[1]	WIRE AS
6.	235-4205	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
7.	3S-2093	[60]	STRAP-CABLE
8.	6N-9349	[1]	CIRCUIT BREAKER AS (30-AMPERE)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
9.	145-8980	[1]	WIRE AS
10.	068-4209	[2]	SCREW (8-32X0.75-IN)
11.	166-4703	[1]	MONITOR (GENERATOR SET)
12.	226-6005	[1]	BRACKET AS
13.	8T-9405 M	[2]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
14.	8C-9660	[2]	WASHER (4.6X7.9X0.8-MM THK)
15.	145-8937	[1]	WIRE AS
16.	235-4208	[1]	HARNESS AS-CONTROL (WITH DROP, GEN ENABLE, LIFT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
17.	235-4209	[1]	HARNESS AS-CONTROL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
18.	6V-7357 M	[3]	BOLT (M6X1X25-MM)
19.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
20.	5C-2890 M	[3]	NUT (M6X1-THD)
21.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
	M		METRIC PART

#SEBC06600014

190-3420: ENCLOSURE GP-GENERATOR

ENCLOSURE GP-GENERATOR

190-3420 ENCLOSURE GP-GENERATOR
PART OF 253-3233 GENERATOR AR-HYDRAULIC

i01518118 SEBC0660

1903420 ENCLOSURE GP-GENERATOR Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	188-0483	[1]	FRAME AS
2.	190-3422	[1]	COVER AS
3.	191-7828	[1]	COVER AS (HINGED)
	7Y-2812	[1]	HANDLE
	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
4.	185-1711	[1]	SUPPORT AS
	4B-4278	[1]	WASHER (10.2X20.5X1.6-MM THK)
5.	188-2636	[1]	TREAD
6.	188-2637	[1]	TREAD
7.		[1]	SHEET
8.	266-3337	[1]	HINGE AS
9.	146-4960	[1]	SUPPORT AS
10.	8T-4133 M	[15]	NUT (M10X1.5-THD)
11.	185-1663	[2]	LATCH AS
12.	4K-2089	[12]	RIVET-POP
13.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
14.	137-2255 M	[10]	BOLT (M8X1.25X8-MM)
15.	8T-4192 M	[4]	BOLT (M12X1.75X25-MM)
16.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	2G-9524	[1]	LATCH
18.	6V-8188	[1]	NUT (1/2-13-THD)
19.	3B-4618	[1]	PIN-COTTER
20.	1P-7407	[1]	EYEBOLT
21.	8T-2562 BD		TRIM
22.	039-6315	[1]	PIN
23.		[1]	SHEET
24.	5C-7261 M	[10]	NUT (M8X1.25-THD)
25.	6V-0702 BD		SEAL
26.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
27.	194-3251	[2]	BUMPER
28.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
29.	6V-7743 M	[4]	LOCKNUT (M6X1-THD)
30.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
31.	099-4691 M	[2]	BOLT-LOCKING (M12X1.75X25-MM)
32.	8T-9371	[4]	BOLT (3/8-16X0.5-IN)
33.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	6V-8801	[4]	NUT (3/8-16-THD)
35.	4P-0870	[4]	MOUNT-FLEXIBLE
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART

#SEBC06600015

253-3205: FRAME GP-UPPER

FRAME GP-UPPER

253-3205 FRAME GP-UPPER
PART OF 247-5442 GENERATOR AR-HYDRAULIC

i02307571 SEBC0660

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	093-0074	[2]	SHIM (1-MM THK)
2.	096-6467	[2]	WASHER (22X60X8-MM THK)
3.	201-2771	[1]	WASHER (26X90X8-MM THK)
4.	212-2841	[2]	SHIM (2-MM THK)
5.	253-3206	[1]	FRAME AS-UPPER
6.	253-3215	[1]	PLATE
7.	093-0106	[1]	SHIM (2-MM THK)
8.	093-0364	[2]	SPACER (103X140X12-MM THK)
9.	117-5435	[2]	PIN AS
10.	147-3957	[1]	SHIM (0.5-MM THK)
11.	166-1488	[4]	SHIM (2-MM THK)
12.	192-8416	[1]	PIN AS
13.	7X-2572 M	[1]	BOLT (M24X3X35-MM)
14.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4123	[2]	WASHER-PLATED (22X35X3.5-MM THK)
16.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
17.	8T-4167	[1]	WASHER-HARD (26X44X4-MM THK)
18.	8T-4780 M	[2]	BOLT (M20X2.5X30-MM)
	M		METRIC PART

#SEBC06600016

216-6748: CONTROL GP-JOYSTICK

CONTROL GP-JOYSTICK

216-6748 CONTROL GP-JOYSTICK -LH
PART OF 253-3234 WIRING GP-GRAPPLE CONTROL

i01861140 SEBC0660

2166748 CONTROL GP-JOYSTICK Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9975	[1]	CONTROL GP-HANDLE (FORESTRY, LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	7Y-3962	[1]	TERMINAL (CONNECTOR)
	7Y-3964	[1]	TUBE (CONNECTOR TERMINAL)
	144-1636	[6]	PIN-CONNECTOR
2.	139-0922	[1]	PIN-SPRING
3.	187-9908	[1]	BOOT
4.	149-1572	[1]	LEVER
5.	7Y-8463 M	[1]	NUT (M14X2-THD)
6.	206-3305 Y	[1]	VALVE GP-PILOT (JOYSTICK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC06600017

216-6749: CONTROL GP-JOYSTICK

CONTROL GP-JOYSTICK

216-6749 CONTROL GP-JOYSTICK -RH
PART OF 253-3234 WIRING GP-GRAPPLE CONTROL

i01861146 SEBC0660

2166749 CONTROL GP-JOYSTICK Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9975	[1]	CONTROL GP-HANDLE (FORESTRY, LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	7Y-3962	[2]	TERMINAL (CONNECTOR)
	7Y-3964	[2]	TUBE (CONNECTOR TERMINAL)
	144-1636	[6]	PIN-CONNECTOR
2.	139-0922	[1]	PIN-SPRING
3.	187-9908	[1]	BOOT
4.	149-1571	[1]	LEVER
5.	7Y-8463 M	[1]	NUT (M14X2-THD)
6.	206-3305 Y	[1]	VALVE GP-PILOT (JOYSTICK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC06600018

253-3213: INSTALLATION AR-HYD GENERATOR

INSTALLATION AR-HYD GENERATOR

253-3213 INSTALLATION AR-HYD GENERATOR
PART OF 247-5442 GENERATOR AR-HYDRAULIC

i02140703 SEBC0660

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
223-4518 Y	[1]	LINES GP-HYDRAULIC
253-3234 Y	[1]	WIRING GP-GRAPPLE CONTROL
114-6294	[1]	BAR AS
8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
8T-4193 M	[7]	BOLT (M16X2X50-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
135-8575 M	[2]	BOLT AS (M12X1.75X30-MM)
		(EACH INCLUDES)
5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
8T-4139 M	[1]	BOLT (M12X1.75X30-MM)
223-4521	[1]	BRACKET AS
8T-3597 M	[1]	NUT-WELD (M12X1.75-THD)
253-3219	[1]	COVER
188-2651	[1]	LADDER AS
184-7794	[4]	STRIP
184-7795	[2]	STRIP
184-7797	[2]	STRIP
187-4363	[2]	STRIP
188-2653	[2]	TREAD
244-5025	[1]	PLATE AS
8T-4122	[7]	WASHER-HARD (17X32X3.5-MM THK)
8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
266-3345	[1]	WIRING GP-MACHINE
231-5238	[1]	HARNESS AS
235-4206	[1]	HARNESS AS-WIRING (MAGNET SWITCH, RELAY)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBC06600019

188-2646: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

188-2646 LINES GP-HYDRAULIC
PART OF 253-3233 GENERATOR AR-HYDRAULIC

i01517699 SEBC0660

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-3230 I	[1]	HOSE AS
2.	185-3231 I	[1]	HOSE AS
3.	253-3197 I	[1]	HOSE AS
4.	164-5577	[2]	ELBOW GP
			(EACH INCLUDES)
	5K-9090	[2]	SEAL-O-RING
	6V-8984	[1]	ELBOW
5.	247-5450 I	[1]	HOSE AS
6.	180-7109	[1]	RING-RETAINING
7.	8T-7491	[1]	CONNECTOR
8.	6V-8398	[1]	SEAL-O-RING
9.	9T-1817	[1]	FILTER GP-OIL
10.	4L-6454	[4]	BOLT (3/8-16X1-IN)
11.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
12.	153-6252	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8398	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	9X-8408	[1]	CONNECTOR
13.	6V-7970	[1]	SEAL-O-RING
14.	148-8375	[1]	ELBOW GP
	6V-8398	[2]	SEAL-O-RING
	6V-8981	[1]	ELBOW
15.	6V-9830	[1]	CAP AS
16.	6V-9833	[2]	CAP AS
17.	6V-9172	[2]	NUT (1-7/16-12-THD)
18.	6V-9169	[1]	NUT-BULKHEAD (13/16-16-THD)
19.	164-5567	[2]	FITTING GP-COUPLING
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-3965	[1]	FITTING AS (QUICK DISCONNECT)
20.	110-6349	[2]	FITTING AS (QUICK DISCONNECT)
21.	164-5586	[1]	TEE AS
	6V-8398	[1]	SEAL-O-RING
	7X-0871	[1]	TEE
22.	148-8370	[1]	ELBOW AS
	6V-8398	[1]	SEAL-O-RING
	6V-9851	[1]	ELBOW
23.	150-3065	[1]	ADAPTER AS
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ADAPTER-O-RING
24.	6V-0852	[4]	CAP-DUST
25.	162-6802	[1]	ELBOW GP
	151-5145	[1]	ELBOW
	3J-7354	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

Information:

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

Operation and Maintenance Manual

Engine Start Switch
330C Excavator

Battery Disconnect Switch
330C Excavator

Light Switches
330C Excavator

Special Instruction

Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}

Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}

Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}

Service Letter-China

Service Letter-Asia

Systems Operation

Switches
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2

Switches
330C Excavator Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Letter-APD

Testing and Adjusting

Low Idle Switch Does Not Work - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2

Troubleshooting

Throttle Switch Circuit - Test
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit

Service Magazine

Correction to Systems Operation Testing and Adjusting , "Engine Speed Control" {1435, 7332}
2002/06/24

The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2002/11/11

Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27

Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490}
2006/02/06

A New Backup Switch for the Engine Speed Control Is Available {1408, 1435}
2006/11/27

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/04/06