AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-4407 LINES GP-FILTER PART OF 255-4403 GENERATOR AR-HYDRAULIC 345C EXCAVATOR


LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
ELECTRICAL AND STARTING SYSTEM
ALARM GP
GENERATOR GP
LIGHTING GP

EXCAVATOR 345C EXCAVATOR PJW
 345C L Factory Installed Right Front Corner Generator Set (266-3360 Generator Arrangement) PJW00001-UP (MACHINE) SEBC0665 345C PJW   (2004)

LUBRICATION SYSTEM

FILTER GP-ENGINE OIL
LINES GP-FILTER
255-4407 LINES GP-FILTER
 

#SEBC06650001
 

255-4407: LINES GP-FILTER

255-4407 LINES GP-FILTER
PART OF 255-4403 GENERATOR AR-HYDRAULIC
i02204881 SEBC0665
2554407 LINES GP-FILTER Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-1817 [1] FILTER GP-OIL  
  1G-8878 [1] FILTER ELEMENT (HYDRAULIC)  
2. 204-1614 [1] BRACKET AS  
3. 261-4985 I [1] HOSE AS  
4. 261-4986 I [1] HOSE AS  
5. 067-2551 [1] CLIP  
6. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
7. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
8. 6V-9830 [1] CAP AS  
9. 8D-9671 [5] CLIP  
10. 8M-2773 [1] CLIP  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
13. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBC06650002
 

132-1829: ALARM GP

132-1829 ALARM GP
24-VOLT
PART OF 253-6149 WIRING GP-CAB
i01664344 SEBC0665
1321829 ALARM GP Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBC06650003
 

205-6343: CONTROL GP-HYDRAULIC GENERATOR

205-6343 CONTROL GP-HYDRAULIC GENERATOR
PART OF 255-4408 GENERATOR GP-HYDRAULIC
i02038627 SEBC0665
2056343 CONTROL GP-HYDRAULIC GENERATOR Parts scheme 2056343 CONTROL GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-4441 [1] ENCLOSURE  
2. 173-5432 [1] PANEL  
3. 230-7662 C [1] CONTROL GP-HYDRAULIC GENERATOR  
4. [1] CONVERTER  
5. [1] ELEMENT  
6. 178-3339 [10] SCREW (8-32X0.5-IN)  
7. 219-0370 [3] STRIP-TERMINAL  
8. [1] THERMOSTAT  
9. 160-3600 [4] RELAY  
10. 222-6983 [2] HEAT SINK  
11. 178-3341 [4] SCREW  
12. 9S-2544 [18] SCREW-HEX HEAD (8-32X11.13-MM)  
13. 097-5921 [1] RAIL-MOUNTING  
14. [6] BRACKET  
15. 5M-9695 [8] SCREW (6-32X0.312-IN)  
16. 160-3603 [1] RELAY  
17. 178-3340 [4] SCREW  
18. [1] MONITOR  
19. 160-3610 [1] CONNECTOR AS  
20. 180-7050 [1] CLAMP  
21. 160-3604 [1] RELAY  
22. 160-3606 [1] CONNECTOR AS  
23. 173-5450 [1] SPRING  
24. 160-3602 [1] RELAY  
25. 173-5455 [1] SOCKET-RELAY  
26. 173-5456 [1] CLIP  
27. 173-5444 [4] STOP  
28. 216-0244 [1] TRANSDUCER  
29. 173-5433 [1] BASE  
30. 178-3342 [2] SCREW  
31. [1] BASE  
32. [2] FUSE (30-AMPERE)  
33. 173-5451 [1] CONTACT  
34. [1] BLOCK-TERMINAL  
35. [1] BLOCK-TERMINAL  
36. 160-3596 [1] RESISTOR  
37. 173-5462 [1] RESISTOR  
38. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
39. 6V-8185 [4] NUT (1/4-20-THD)  
40. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
41. 160-3580 [1] HANDLE  
42. 160-3581 [1] SHAFT  
43. 173-5436 [1] FUSE (1-AMPERE)  
44. 201-9909 [3] FUSE (5-AMPERE)  
45. [4] HOLDER AS-FUSE  
46. 219-0371 [1] STRIP-TERMINAL  
47. 180-7090 [2] CONNECTOR  
48. 173-5439 [4] TERMINAL  
49. 173-5441 [1] PLATE  
50. 203-2534 [1] BASE-MOUNTING  
51. 207-7013 [1] HARNESS AS-PANEL  
52. 180-5557 [1] HARNESS AS-WIRING (MAGNET CIRCUIT)  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
53. 180-7047 [1] HARNESS AS-POWER (DC)  
54. 180-7096 [1] HARNESS AS-POWER (RESISTOR)  
55. 160-3579 [1] SWITCH (DISCONNECT)  
56. 173-5440 [26] TERMINAL  
57. 190-3816 [2] PLATE-END  
58. 180-5556 [1] ENCLOSURE  
59. 180-5558 [1] PANEL  
60. 178-3343 [2] SCREW  
61. 4B-2043 [2] NUT (8-32-MM)  
62. 180-7052 [2] STANDOFF  
63. 5P-8937 B COMPOUND  
64. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
65. 3B-4501 [2] LOCKWASHER  
66. 180-7089 [3] CONNECTOR  
67. 219-4209 [1] SIDE JUMPER  
68. 205-8375 [1] WIRE AS  
69. 205-8374 [2] SUPRESSOR AS  
    (EACH INCLUDES)
  125-7874 E TUBE-HEAT SHRINK (6CM)  
70. 3L-9089 [2] SCREW-FORMING  
71. 9Y-7207 [1] STRIP-TERMINAL  
72. 4B-2047 [2] NUT (10-24-THD)  
73. 7M-9910 [2] SCREW-MACHINE (M10X24X25.4-MM)  
74. 008-9792 [2] SCREW-WASHER HEAD (1/4-20X0.5-IN)  
75. 201-9910 [1] STRIP  
76. [2] STRIP  
77. [2] STRIP  
78. [2] STRIP  
79. [1] CABLE  
80. 123-6574 [3] BUSHING  
81. 180-7093 [2] CONNECTOR  
82. 9M-4494 [3] NUT-SPANNER  
83. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
84. 017-8715 [2] SCREW  
85. 8S-4626 [2] SPLICE-WIRE  
86. 117-9409 [1] GROMMET  
87. 229-6611 [1] DIODE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC06650004
 

255-4403: GENERATOR AR-HYDRAULIC

255-4403 GENERATOR AR-HYDRAULIC
PART OF 266-3360, 266-3388 GENERATOR AR-HYDRAULIC
i02204872 SEBC0665
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  255-4408 Y [1] GENERATOR GP-HYDRAULIC  
  255-4407 Y [1] LINES GP-FILTER  
  255-4404 Y [1] MONITOR GP-OPERATOR (HYDRAULIC GENERATOR)  
   
  7X-2553 M [4] BOLT (M16X2X40-MM)  
  8T-4195 M [16] BOLT (M10X1.5X30-MM)  
  255-4409 [1] CABLE  
  135-1669 [2] CONNECTOR  
  135-1670 [2] CONNECTOR  
  164-0574 [4] MOUNT AS  
  9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
    (CONTROL PANEL HANDLE)
  246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
   
    (NO ILLUSTRATION AVAILABLE AT TIME OF PUBLICATION)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06650005
 

266-3360: GENERATOR AR-HYDRAULIC

266-3360 GENERATOR AR-HYDRAULIC
i02345404 SEBC0665
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  266-3396 Y [1] ADAPTER GP-WORK TOOL  
  255-0968 Y [1] COVER GP-ACCESS (FRONT, RH)  
  255-0638 Y [1] ENCLOSURE GP-GENERATOR  
  266-3368 Y [1] FRAME GP-UNDERCARRIAGE  
  255-4403 Y [1] GENERATOR AR-HYDRAULIC  
  266-3366 Y [1] INSTALLATION AR-HYD GENERATOR  
   
  267-6402 [1] FILM-INFORMATION (OPERATOR CONTROLS, MH)  
  266-3358 [1] FRAME AS-UPPER  
   
  Y   SEPARATE ILLUSTRATION
 

#SEBC06650006
 

266-3388: GENERATOR AR-HYDRAULIC

266-3388 GENERATOR AR-HYDRAULIC
i02400061 SEBC0665
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  266-3396 Y [1] ADAPTER GP-WORK TOOL  
  272-5821 Y [1] COVER GP-ACCESS (FRONT, RH)  
  255-0638 Y [1] ENCLOSURE GP-GENERATOR  
  266-3368 Y [1] FRAME GP-UNDERCARRIAGE  
  255-4403 Y [1] GENERATOR AR-HYDRAULIC  
  273-6436 Y [1] INSTALLATION AR-HYD GENERATOR  
   
  273-6422 [1] FILM GP  
  266-3358 [1] FRAME AS-UPPER  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06650007
 

255-4408: GENERATOR GP-HYDRAULIC

255-4408 GENERATOR GP-HYDRAULIC
25-KW
PART OF 255-4403 GENERATOR AR-HYDRAULIC
i02204879 SEBC0665
2554408 GENERATOR GP-HYDRAULIC Parts scheme 2554408 GENERATOR GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4890 [3] NUT-SPECIAL  
2. 6I-6721 [2] ELBOW  
3. 7X-5308 [4] CAP-DUST  
4. 8J-1256 [1] CLIP  
5. 8W-4756 [3] BUSHING-TERMINAL  
6. 9U-5872 [1] INSERT-COUPLING  
7. 062-5388 [2] NUT-SPECIAL  
8. 068-3708 [3] NUT-SPECIAL  
9. 104-3648 [1] BUSHING  
10. 104-3650 [2] BUSHING  
11. 136-1122 [8] BUSHING  
12. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
14. 164-5567 [2] FITTING GP-COUPLING  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING AS (QUICK DISCONNECT)  
15. 164-5586 [1] TEE AS  
  6V-8398 [1] SEAL-O-RING  
  7X-0871 [1] TEE  
16. 166-4706 [1] HARNESS AS-SOLENOID (GENERATOR HYDRAULIC MANIFOLD)  
17. 170-8599 [2] FILM-WARNING (GENERATOR DISCONNECT SWITCH)  
18. 171-4667 [1] COVER  
19. 173-5434 [1] FUSE (110-AMPERE)  
20. 178-7238 [1] MOUNTING  
21. 178-7240 [1] FILM-INSTRUCTION (HYDRAULIC MANIFOLD)  
22. 180-7101 [1] COUPLING  
23. 180-7109 [1] RING-RETAINING  
24. 180-7113 [1] CONNECTOR  
25. 180-7121 [1] COUPLING  
27. 189-2990 [1] GENERATOR GP  
  195-8524 [1] BEARING  
  195-8528 [4] BRUSH  
  195-8534 [2] HOLDER-BRUSH  
  195-8542 [2] LOUVER  
  195-8543 [3] LOUVER  
  6Y-6487 [1] BALL BEARING  
  269-0788 [1] SPRING  
28. 190-9372 [1] CONNECTOR  
29. 201-9908 [1] FILM-INSTRUCTION (GENERATOR ENCLOSURE)  
30. 205-6343 Y [1] CONTROL GP-HYDRAULIC GENERATOR  
31. 251-8483 Y [1] MOTOR GP-HYDRAULIC GENERATOR  
32. 252-9257 [1] SUPPORT AS  
33. 253-6148 [1] HARNESS AS-POWER  
34. 255-4405 [1] HARNESS AS-BOX  
35. 255-4406 [1] HARNESS AS-BOX  
36. 110-6349 [2] FITTING AS (QUICK DISCONNECT)  
37. 160-5885 Y [1] VALVE GP-FLOW CONTROL & RELIEF (HYDRAULIC GENERATOR)  
38. 1P-3704 [2] SEAL-RECTANGULAR  
39. 4B-2043 [4] NUT (8-32-MM)  
40. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
41. 4P-9254 [1] BUSHING-REDUCER  
43. 5C-2890 M [7] NUT (M6X1-THD)  
44. 5C-9553 M [7] BOLT (M6X1X16-MM)  
45. 5K-9090 [2] SEAL-O-RING  
46. 6D-4244 [1] CLIP  
47. 6V-7687 M [4] LOCKNUT (M12X1.75-THD)  
48. 6V-7744 M [3] LOCKNUT (M10X1.15-THD)  
49. 6V-7970 [1] SEAL-O-RING  
50. 6V-8398 [1] SEAL-O-RING  
51. 7S-1197 [4] SCREW-MACHINE (8-32X0.5-IN)  
52. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
53. 7X-0346 [2] BOLT (5/8-11X2-IN)  
55. 7X-7960 M [8] BOLT (M12X1.75X220-MM)  
56. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
57. 8T-4122 M [6] WASHER-HARD (17X32X3.5-MM THK)  
58. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
59. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
60. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
61. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
62. 8T-4244 M [1] NUT (M12X1.75-THD)  
63. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
64. 8T-7491 [1] CONNECTOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06650008
 

153-2523: LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD -HORIZONTAL RH
65 WATT/24 VOLT
PART OF 261-4485 WIRING GP-LIGHTING
i00998903 SEBC0665
1532523 LAMP GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5210 M [2] SCREW-MACHINE (M4X0.7X10-MM)  
2. 3B-4501 [2] LOCKWASHER  
3. 9X-3463 [1] LAMP-HALOGEN (24-VOLT, 65-WATT)  
4. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-4244 M [1] NUT (M12X1.75-THD)  
6. 174-7791 M [1] SCREW-TAPPING  
7. 5C-2889 [1] LOCKWASHER  
8. 170-6993 [1] COVER  
9. 170-9417 [1] LAMP AS  
10. 180-3861 M [4] SCREW-TAPPING  
11. 170-9418 [1] BAND  
  M   METRIC PART
 

#SEBC06650009
 

163-6772: LIGHTING GP-FLOOD

163-6772 LIGHTING GP-FLOOD -CAB
PART OF 258-7942 CAB GP
i02159166 SEBC0665
1636772 LIGHTING GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6795 [2] STRAP-CABLE  
2. 163-6813 [1] COVER (LH)  
3. 163-6814 [1] COVER (RH)  
4. 167-3437 [1] BRACKET AS (LH)  
5. 167-3438 [1] BRACKET AS (RH)  
6. 167-3441 [2] LAMP GP-FLOOD  
7. 167-3456 [2] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
8. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
9. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 8T-4970 M [4] BOLT (M6X1X14-MM)  
11. 8T-6411 M [6] SCREW-MACHINE (M6X1X12-MM)  
12. 8T-6412 M [2] SCREW-MACHINE (M6X1X20-MM)  
13. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
14. 9X-8256 B [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Oil Filter - Inspect
345C Excavator
Engine Oil and Filter - Change
345C Excavator
Technical Information Bulletin
Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308}
Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308}
Specifications
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter Base
C11 and C13 Engines
Engine Oil Filter
C11 and C13 Engines
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Engine Oil Filter Base - Disassemble
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Remove
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Remove
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement
Engine Oil Filter Base - Assemble
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement
Engine Oil Filter Base - Remove
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement
Engine Oil Filter Base - Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement
Service Magazine
Correct Installation Procedure for the 235-1448 Tube As {1304, 1306}
2006/08/28
Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines {1306, 7555}
2009/09/30
New Engine Oil Hoses Are Used on Certain Excavators Equipped with C13 Engines {1308}
2013/03/29
A New Oil Filter Bypass Spring is Now Used on Certain C13 Machine Engines {1306}
A New Oil Filter Bypass Spring is Now Used on Certain C13 Machine Engines {1306}
An Improved Oil Filler Cap is Available for Certain Caterpillar Machine Engines {1316}
An Improved Oil Filler Cap is Available for Certain Caterpillar Machine Engines {1316}

Caterpillar Parts SIS Catalog 345C :

ALARM GP
132-1829 ALARM GP
CONTROL GP-HYDRAULIC GENERATOR
205-6343 CONTROL GP-HYDRAULIC GENERATOR
255-4403 GENERATOR AR-HYDRAULIC
266-3360 GENERATOR AR-HYDRAULIC
266-3388 GENERATOR AR-HYDRAULIC
GENERATOR GP-HYDRAULIC
255-4408 GENERATOR GP-HYDRAULIC
LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
LIGHTING GP-FLOOD
163-6772 LIGHTING GP-FLOOD

Truck sale:

Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
70,587 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
70,255 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.