AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

270-9465 ENCLOSURE GP-GENERATOR S/N JJM1-UP PART OF 290-8238 CHASSIS AR 330D EXCAVATOR


FRAME AND BODY
ENCLOSURE GP
FENDER GP
FRAME GP
GEAR & BEARING GP

EXCAVATOR 330D EXCAVATOR JJM
 330D Custom Waste Handler JJM00001-UP (MACHINE) POWERED BY C9 Engine SEBC0670 330D JJM   (2007)

FRAME AND BODY

ENCLOSURE GP
ENCLOSURE GP-GENERATOR
270-9465 ENCLOSURE GP-GENERATOR
HOOD & GUARD GP
290-8239 HOOD & GUARD GP
 

#SEBC06700270
 

270-9465: ENCLOSURE GP-GENERATOR

270-9465 ENCLOSURE GP-GENERATOR
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR
i02467864 SEBC0670
2709465 ENCLOSURE GP-GENERATOR Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 270-9459 [1] COVER AS  
  5P-8309 D SEAL (1-M)  
2. 294-4626 [1] BOX AS  
  128-2596 D SEAL (1.1-M)  
3. 271-0562 [1] TREAD  
4. 137-2255 M [5] BOLT (M8X1.25X8-MM)  
5. 5C-7261 M [5] NUT (M8X1.25-THD)  
6. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
8. 135-8575 [4] BOLT AS  
9. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 109-5008 [2] BUMPER-CONICAL  
11. 8T-4897 [4] WASHER (10.2X35X6-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBC06700271
 

280-3511: FENDER & COVER GP

280-3511 FENDER & COVER GP
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR
i02471252 SEBC0670
2803511 FENDER & COVER GP Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-3702 [2] SPACER (15X35X11-MM THK)  
2. 236-3703 [2] WASHER (25X35X4-MM THK)  
3. 280-3538 [1] COVER AS-SOUND SUPPRESSION  
4. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBC06700272
 

293-9023: FRAME GP-UPPER

293-9023 FRAME GP-UPPER
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR
i02806901 SEBC0670
2939023 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [2] SHIM (1-MM THK)  
2. 093-0090 B [4] SHIM (1-MM THK)  
3. 093-0364 [2] SPACER (103X140X12-MM THK)  
4. 096-6467 [2] WASHER (22X60X8-MM THK)  
5. 133-2427 B [2] SHIM (0.5-MM THK)  
6. 201-2771 [1] WASHER (26X90X8-MM THK)  
7. 212-2841 B [2] SHIM (2-MM THK)  
8. 251-2542 [1] PIN AS  
9. 293-9024 [1] FRAME AS-UPPER  
10. 093-0106 B [1] SHIM (2-MM THK)  
11. 117-5435 [2] PIN AS  
12. 147-3957 B [1] SHIM (0.5-MM THK)  
13. 166-1488 [4] SHIM (2-MM THK)  
14. 7X-2572 M [1] BOLT (M24X3X35-MM)  
15. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
16. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
17. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBC06700273
 

227-6093: GEAR & BEARING GP-SWING

227-6093 GEAR & BEARING GP-SWING
S/N JJM1-224
PART OF 267-6756 GEAR & BEARING GP-SWING
FIELD REPLACEMENT ORDER 31-141-6373 BOLT, 11-333-3089 PLUG, 15-353-1660 BOLT, 1-353-0489 GEAR & BEARING GP-SWING
i02184418 SEBC0670
2276093 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6074 [2] SEAL-DUST  
   
  148-4685 EF SEAL (465-CM)  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
 

#SEBC06700274
 

267-6756: GEAR & BEARING GP-SWING

267-6756 GEAR & BEARING GP-SWING
S/N JJM1-224
PART OF 290-8243 FRAME AR-UNDERCARRIAGE
i02449835 SEBC0670
2676756 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
2. 6I-6441 [11] CORK  
3. 7Y-1647 [1] GASKET  
4. 7Y-1650 [1] CLAMP-HOSE  
5. 102-6445 M [15] BOLT (M24X3X170-MM)  
6. 112-1531 M [52] BOLT (M24X3X120-MM)  
7. 199-4523 [1] TUBE AS (RH)  
8. 199-4524 [1] TUBE AS (LH)  
9. 227-6093 Y [1] GEAR & BEARING GP-SWING (92-BEARING)  
10. 227-6105 [1] BOOT  
11. 227-6106 [1] RETAINER  
12. 093-0020 [46] SPACER (25X44X6-MM THK)  
13. 112-1532 M [31] BOLT (M24X3X140-MM)  
14. 148-4703 [1] COVER  
15. 148-4704 [1] GASKET  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 4N-9170 [4] CLIP  
18. 7Y-1095 [1] DOWEL  
19. 7Y-1507 [52] SPACER (24.5X44X43-MM THK)  
20. 7Y-1648 [1] STRIP  
21. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
23. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
25. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700275
 

267-6756: GEAR & BEARING GP-SWING

267-6756 GEAR & BEARING GP-SWING
S/N JJM225-UP
PART OF 290-8243 FRAME AR-UNDERCARRIAGE
i04032998 SEBC0670
2676756 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
2. 333-3089 C [11] PLUG  
3. 7Y-1647 [1] GASKET  
4. 7Y-1650 [1] CLAMP-HOSE  
5. 353-1660 CM [15] BOLT (M24X3X180-MM)  
6. 112-1531 M [52] BOLT (M24X3X120-MM)  
7. 199-4523 [1] TUBE AS (RH)  
8. 199-4524 [1] TUBE AS (LH)  
9. 353-0489 CY [1] GEAR & BEARING GP-SWING  
10. 227-6105 [1] BOOT  
11. 227-6106 [1] RETAINER  
12. 093-0020 [46] SPACER (25X44X6-MM THK)  
13. 141-6373 CM [31] BOLT (M24X3X150-MM)  
14. 148-4703 [1] COVER  
15. 148-4704 [1] GASKET  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 4N-9170 [4] CLIP  
18. 7Y-1095 [1] DOWEL  
19. 7Y-1507 [52] SPACER (24.5X44X43-MM THK)  
20. 7Y-1648 [1] STRIP  
21. 453-3454 [14] WASHER-HARD (11X21X2.5-MM THK)  
22. 455-3798 M [12] BOLT (M10X1.5X25-MM)  
23. 457-8759 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700276
 

353-0489: GEAR & BEARING GP-SWING

353-0489 GEAR & BEARING GP-SWING
S/N JJM225-UP
PART OF 267-6756 GEAR & BEARING GP-SWING
FIELD REPLACEMENT FOR 227-6093 GEAR & BEARING GP-SWING
ALSO FIELD INSTALLATION
i04033012 SEBC0670
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  367-8350 Y [1] GEAR & BEARING GP-SWING  
    -OR-
  367-8359 Y [1] GEAR & BEARING GP-SWING  
    -OR-
  393-6548 Y [1] GEAR & BEARING GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700277
 

367-8350: GEAR & BEARING GP-SWING

367-8350 GEAR & BEARING GP-SWING
S/N JJM225-UP
PART OF 353-0489 GEAR & BEARING GP-SWING
ALSO FIELD INSTALLATION
i04475209 SEBC0670
3678350 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 110-7183 E SEAL (476-CM)  
2A. 110-7183 E SEAL (477-CM)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
 

#SEBC06700278
 

367-8359: GEAR & BEARING GP-SWING

367-8359 GEAR & BEARING GP-SWING
S/N JJM225-UP
PART OF 353-0489 GEAR & BEARING GP-SWING
ALSO FIELD INSTALLATION
i04475231 SEBC0670
3678359 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6074 [2] SEAL-DUST  
   
  148-4685 EF SEAL (465-CM)  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
 

#SEBC06700279
 

393-6548: GEAR & BEARING GP-SWING

393-6548 GEAR & BEARING GP-SWING
S/N JJM244-UP
PART OF 353-0489 GEAR & BEARING GP-SWING
i05221339 SEBC0670
3936548 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6074 [1] SEAL-DUST  
3. 148-4685 E SEAL (465-CM)  
4. 352-7064 [1] CAP  
  E   ORDER BY THE CENTIMETER
 

Information:

Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 262-2592 SHEET ASSEMBLY (SUCTION COVER) ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 262-2592 SHEET ASSEMBLY (SUCTION COVER) ON CERTAIN 330D AND 336D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Enclosure (Cooling System Package) - Remove
330D Waste Handler
Engine Supplement
Enclosure (Cooling System Package) - Install
330D Waste Handler
Engine Supplement
Service Magazine
A New Suction Cover Prevents Pressure Loss of Air Intake on Certain Excavators and Mobile Hydraulic Power Units {7251, 7276}
2011/10/19

Caterpillar Parts SIS Catalog 330D :

DOOR GP-ACCESS
300-2313 DOOR GP-ACCESS
DOOR GP-ACCESS
289-6895 DOOR GP-ACCESS
DOOR AS-ACCESS
298-3191 DOOR AS-ACCESS
COVER GP-SIDE
300-6318 COVER GP-SIDE
COVER GP-ACCESS
272-5821 COVER GP-ACCESS
COVER AS-SOUND SUPPRESSION
273-7873 COVER AS-SOUND SUPPRESSION
COVER AS-SOUND SUPPRESSION
259-3552 COVER AS-SOUND SUPPRESSION
COUNTERWEIGHT GP
330-1275 COUNTERWEIGHT GP
FENDER & COVER GP
280-3511 FENDER & COVER GP
FRAME GP-UPPER
293-9023 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6093 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
267-6756 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
267-6756 GEAR & BEARING GP-SWING
353-0489 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
367-8350 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
367-8359 GEAR & BEARING GP-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.