AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7Y-3475 ADJUSTER GP-BUCKET PIN 4MM1-UP C-FAMILY PART OF 133-1582, 133-1583, 133-3153, 133-3154 HAMMER & LINES GP 317-A


WORK TOOLS
BUCKET GP
HYDRAULIC SYSTEM
LINES GP-HAMMER

EXCAVATOR 317-A EXCAVATOR 4MM
 317 & 317 N Excavator Custom Attachments 4MM00001-UP (MACHINE) SEBC1055 317-A 4MM   (1995)

WORK TOOLS

BUCKET GP
ADJUSTER GP-BUCKET
7Y-2219 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
7Y-3475 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
7Y-3476 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
106-6757 ADJUSTER GP-BUCKET
 

#SEBC10550060
 

7Y-3475: ADJUSTER GP-BUCKET

7Y-3475 ADJUSTER GP-BUCKET
PIN 4MM1-UP
C-FAMILY
PART OF 133-1582, 133-1583, 133-3153, 133-3154 HAMMER & LINES GP
i01057166 SEBC1055
7Y3475 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-7687 B [6] SHIM (1.0MM THK)  
2. 7Y-7686 B [4] SHIM (0.5MM THK)  
3. 7Y-7685 [1] PIN  
4. 134-8949 [1] PLATE  
5. 8T-4193 M [5] BOLT (M16X2.0X50MM)  
6. 9X-8257 [5] WASHER (3.50MM THK)  
7. 7Y-7688 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBC10550061
 

7Y-3476: ADJUSTER GP-BUCKET

7Y-3476 ADJUSTER GP-BUCKET
PIN 4MM1-UP
D-FAMILY
PART OF 133-3179, 133-3180 HAMMER & LINES GP
i01057200 SEBC1055
7Y3476 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5976 B [6] SHIM (1MM THK)  
2. 087-5975 B [4] SHIM (.5MM THK)  
3. 087-5974 [1] PIN  
4. 134-8950 [1] PLATE  
5. 8T-4193 M [6] BOLT (M16X2.0X50MM)  
6. 9X-8257 [6] WASHER (3.50MM THK)  
7. 087-5978 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBC10550062
 

106-6757: ADJUSTER GP-BUCKET

106-6757 ADJUSTER GP-BUCKET
PART OF 137-7250, 137-7251 HAMMER & LINES GP, 121-5539 MOUNTING GP-HAMMER
i00490429 SEBC1055
1066757 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9965 B [6] SHIM (1.00MM THK)  
2. 107-9966 B [4] SHIM (.5MM THK)  
3. 7Y-7685 [1] PIN  
4. 107-9967 [1] PLATE  
5. 8T-4193 M [4] BOLT (M16X2.0X50MM)  
6. 9X-8257 [4] WASHER (3.50MM THK)  
7. 107-9968 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBC10550063
 

132-3695: HAMMER & LINES GP

132-3695 HAMMER & LINES GP -CUSTOM
PIN 4MM445-UP
B-FAMILY, 115 HAMMER
i00991028 SEBC1055
1323695 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-5650 [1] BRACKET AS  
2. 118-9207 I [2] HOSE AS  
3. 8T-4186 M [8] BOLT (M10X1.50X40MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7469 [2] CLIP (TAB)  
6. 5P-7468 [2] CLIP (SLOT)  
7. 5P-8444 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 120-5948 L [1] HAMMER AR-HYDRAULIC  
13. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
14. 4J-0520 [2] SEAL-O-RING (32.92MM ID)  
15. 8T-4121 [8] WASHER (2.5MM THK)  
16. 1P-3703 [2] SEAL-RECTANGULAR (31.86MM ID)  
17. 8C-3206 [4] FLANGE-HALF  
19. 7Y-2219 Y [1] ADJUSTER GP-BUCKET  
  I   SEE HOSE FABRICATION GUIDE
  L   REFER TO MODEL 115 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550064
 

133-1582: HAMMER & LINES GP

133-1582 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, C-FAMILY LINKAGE
i01057012 SEBC1055
1331582 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-5651 [1] BRACKET AS  
2. 128-8412 I [2] HOSE AS  
3. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7471 [2] CLIP (TAB)  
6. 5P-7470 [2] CLIP (SLOT)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
14. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
15. 1P-5767 [4] FLANGE-HALF  
16. 7X-0510 [8] WASHER-HARD  
17. 7Y-3475 Y [1] ADJUSTER GP-BUCKET  
  I   SEE HOSE FABRICATION GUIDE
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550065
 

133-1583: HAMMER & LINES GP

133-1583 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, C-FAMILY LINKAGE, GUARDED HOSES
i01057039 SEBC1055
1331583 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-5651 [1] BRACKET AS  
2. 130-8265 [2] HOSE AS  
3. 8T-4186 M [8] BOLT (M10X1.50X40MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7470 [2] CLIP (SLOT)  
6. 5P-7471 [2] CLIP (TAB)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
14. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
15. 1P-5767 [4] FLANGE-HALF  
16. 7X-0510 [8] WASHER-HARD  
17. 7Y-3475 Y [1] ADJUSTER GP-BUCKET  
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550066
 

133-3153: HAMMER & LINES GP

133-3153 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, S-FAMILY LINKAGE
i01057048 SEBC1055
1333153 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-9953 [1] BRACKET AS  
2. 128-8412 I [2] HOSE AS  
3. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7471 [2] CLIP (TAB)  
6. 5P-7470 [2] CLIP (SLOT)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
14. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
15. 1P-5767 [4] FLANGE-HALF  
16. 7X-0510 [8] WASHER-HARD  
17. 7Y-3475 Y [1] ADJUSTER GP-BUCKET  
  I   SEE HOSE FABRICATION GUIDE
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550067
 

133-3154: HAMMER & LINES GP

133-3154 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, S-FAMILY LINKAGE, GUARDED HOSES
i01057051 SEBC1055
1333154 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-9953 [1] BRACKET AS  
2. 130-8265 [2] HOSE AS  
3. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7471 [2] CLIP (TAB)  
6. 5P-7470 [2] CLIP (SLOT)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
15. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
16. 1P-5767 [4] FLANGE-HALF  
17. 7X-0510 [8] WASHER-HARD  
18. 7Y-3475 Y [1] ADJUSTER GP-BUCKET  
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550068
 

133-3179: HAMMER & LINES GP

133-3179 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, D-FAMILY LINKAGE
i01056786 SEBC1055
1333179 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-5652 [1] BRACKET AS  
2. 128-8412 I [2] HOSE AS  
3. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7471 [2] CLIP (TAB)  
6. 5P-7470 [2] CLIP (SLOT)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
14. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
15. 1P-5767 [4] FLANGE-HALF  
16. 7X-0510 [8] WASHER-HARD  
17. 7Y-3476 Y [1] ADJUSTER GP-BUCKET  
  I   SEE HOSE FABRICATION GUIDE
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC10550069
 

133-3180: HAMMER & LINES GP

133-3180 HAMMER & LINES GP -CUSTOM
PIN 4MM1-UP
MODEL 120, D-FAMILY LINKAGE, GUARDED HOSES
i01056783 SEBC1055
1333180 HAMMER & LINES GP Parts scheme
  For full view, you need register

Parts for your 317-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-5652 [1] BRACKET AS  
2. 130-8265 [2] HOSE AS  
3. 8T-4184 M [8] BOLT (M12X1.75X45MM)  
4. 8T-4223 [10] WASHER-HARD (3MM THK)  
5. 5P-7471 [2] CLIP (TAB)  
6. 5P-7470 [2] CLIP (SLOT)  
7. 5P-8182 [2] GROMMET  
8. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
9. 7X-2489 M [10] BOLT (M24X3X100MM)  
10. 6V-7676 M [10] NUT (M24X3.0THD)  
11. 8T-4167 [10] WASHER (4.0MM THK)  
12. 117-0107 L [1] HAMMER AR-HYDRAULIC  
13. 7Y-2067 M [8] BOLT (M14X2X55MM)  
14. 1P-3704 [4] SEAL-RECTANGULAR (38.2MM ID)  
15. 1P-5767 [4] FLANGE-HALF  
16. 7X-0510 [8] WASHER-HARD  
17. 7Y-3476 Y [1] ADJUSTER GP-BUCKET  
  L   REFER TO MODEL 120 MANUAL FOR HAMMER PARTS BREAKDOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Bucket Adjuster Group<BR> 106-6757
317 AND 317N EXCAVATORS ATTACHMENTS
Bucket Linkage Group<BR> 111-0085
317 AND 317N EXCAVATORS ATTACHMENTS
Bucket Cylinder Groups
317 AND 317N EXCAVATORS ATTACHMENTS
Bucket Assemblies
317 AND 317N EXCAVATORS ATTACHMENTS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
315, 315L, 317 & 317N EXCAVATORS MACHINE SYSTEMS
Bucket Linkage Group
315, 315L, 317 & 317N EXCAVATORS MACHINE SYSTEMS
Service Magazine
Tightening Specifications Are Changed For Piston Locknut On Bucket, Boom And Stick Cylinders {5456,5457,5458}
1997/03/24
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 317-A :

ADJUSTER GP-BUCKET
7Y-2219 ADJUSTER GP-BUCKET
ACTUATOR GP-CLAMSHELL
120-6793 ACTUATOR GP-CLAMSHELL
VALVE GP-STICK LOWERING CONT
132-6108 VALVE GP-STICK LOWERING CONT
VALVE GP-SOLENOID
7Y-5005 VALVE GP-SOLENOID
VALVE GP-SOLENOID
4I-6158 VALVE GP-SOLENOID
VALVE GP-PILOT RELIEF
107-6917 VALVE GP-PILOT RELIEF
VALVE GP-PILOT
113-2524 VALVE GP-PILOT
VALVE GP-PILOT
113-2523 VALVE GP-PILOT
ADJUSTER GP-BUCKET
7Y-3476 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
106-6757 ADJUSTER GP-BUCKET
HAMMER & LINES GP
132-3695 HAMMER & LINES GP
HAMMER & LINES GP
133-1582 HAMMER & LINES GP
HAMMER & LINES GP
133-1583 HAMMER & LINES GP
HAMMER & LINES GP
133-3153 HAMMER & LINES GP
HAMMER & LINES GP
133-3154 HAMMER & LINES GP
HAMMER & LINES GP
133-3179 HAMMER & LINES GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.