AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-7871 WIRING GP-FRONT -CUSTOM S/N 4YS1-UP PART OF 2Z-9987, 2Z-9988 LIFT AR 938G WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP
POWER TRAIN
COOLER GP
DIFFERENTIAL & BEVEL GEAR GP
FILLER GP-POWER TRAIN OIL

WHEEL LOADER 938G WHEEL LOADER 4YS
 Waste Ar and Scrap Ar Custom Product Support Literature for 938G Wheel Loader and IT38G Integrated Toolcarrier 4YS00001-UP (MACHINE) SEBC1212 938G 4YS   (1997)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FRONT
2Q-7871 WIRING GP-FRONT
WIRING GP-SECONDARY STEERING
143-2469 WIRING GP-SECONDARY STEERING
WIRING GP-TRACTION CONTROL
134-8505 WIRING GP-TRACTION CONTROL
WIRING GP-TRACTION CONTROL
135-2606 WIRING GP-TRACTION CONTROL
 

#SEBC12120020
 

2Q-7871: WIRING GP-FRONT

2Q-7871 WIRING GP-FRONT -CUSTOM
S/N 4YS1-UP
PART OF 2Z-9987, 2Z-9988 LIFT AR
i01173097 SEBC1212
2Q7871 WIRING GP-FRONT Parts scheme 2Q7871 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3019 [2] CLIP  
2. 3S-2093 [6] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [1] NUT (M10X1.5-THD)  
6. 112-2960 [1] HARNESS AS-LIGHTING (LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  8T-8737 [5] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  3S-2093 [1] STRAP-CABLE  
7. 9K-0700 [2] GROMMET  
8. 112-3638 [1] HARNESS AS-LIGHTING (RH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  8T-8737 [5] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  3S-2093 [1] STRAP-CABLE  
9. 186-2331 [1] HARNESS AS-FRONT  
  155-2267 [4] PLUG AS-CONNECTOR (3-PIN)  
  7T-5957 [2] TERMINAL AS  
  3S-2093 [6] STRAP-CABLE  
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  155-2269 [1] PLUG AS-CONNECTOR (2-PIN)  
  155-2273 [2] PLUG AS-CONNECTOR (6-PIN)  
  3T-5451 [2] TERMINAL AS  
  100-5805 [1] CAP-RECEPTACLE  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  155-2252 [1] PLUG AS-CONNECTOR (12-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  155-2272 [2] PLUG AS-CONNECTOR (4-PIN)  
10. 6D-4246 [1] CLIP  
11. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
12. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5P-8444 [2] GROMMET  
15. 5P-7468 [2] CLIP (SLOT)  
16. 5P-7469 [2] CLIP (TAB)  
17. 7T-0970 [1] HORN AS (24-VOLT, HIGH TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
  096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
18. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
19. 126-6435 [1] BRACKET  
20. 8T-4244 M [5] NUT (M12X1.75-THD)  
21. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
22. 4S-1962 [2] CLIP  
23. 7G-7053 [1] GROMMET  
24. 7K-1181 [14] STRAP-CABLE  
25. 3V-0778 [1] BRACKET  
26. 4P-8134 [2] CLIP  
27. 6V-2383 [1] CLIP  
28. 2Q-3847 [1] HARNESS AS-SWITCH (KEY)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  M   METRIC PART
 

#SEBC12120021
 

143-2469: WIRING GP-SECONDARY STEERING

143-2469 WIRING GP-SECONDARY STEERING
PART OF 2Q-8065 STEERING AR-SECONDARY
i00583838 SEBC1212
1432469 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-7080 [1] CABLE AS  
2. 113-8445 [1] CABLE AS  
3. 115-3069 [2] CLIP AS-CONNECTOR (3-PIN)  
4. 116-4491 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 118-5597 [1] DIODE AS  
6. 139-2599 [1] RELAY  
7. 140-6094 [1] CABLE AS  
8. 140-6308 [1] CABLE AS  
9. 140-6309 [1] CABLE AS  
10. 143-2470 [1] HARNESS AS-STEERING (SECONDARY)  
  102-8808 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
11. 145-1015 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
12. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS AND WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3K-0360 [2] SEAL-O-RING  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 4P-7581 [1] CLIP  
16. 4S-1962 [1] CLIP  
17. 5C-7261 M [1] NUT (M8X1.25-THD)  
18. 5C-8312 M [2] NUT (M4X0.7-THD)  
19. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
20. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 6V-8188 [6] NUT (1/2-13-THD)  
22. 7F-0560 [6] WASHER (0.516X0.938X0.101-IN THK)  
23. 7X-2552 M [2] BOLT (M16X2X30-MM)  
24. 8C-6358 [1] BLOCK AS-JUNCTION (BATTERY)  
  1D-5117 [3] NUT-JAM (1/2-13-THD)  
25. 8L-8413 [14] STRAP-CABLE (WHITE)  
26. 8M-2770 [6] CLIP  
27. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
30. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
31. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
32. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4244 M [1] NUT (M12X1.75-THD)  
36. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
38. 9M-8406 [1] CLIP  
39. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
40. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS AND WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
 

#SEBC12120022
 

134-8505: WIRING GP-TRACTION CONTROL

134-8505 WIRING GP-TRACTION CONTROL
PART OF 2Q-7880 CONTROL AR-TRACTION
i01164209 SEBC1212
1348505 WIRING GP-TRACTION CONTROL Parts scheme 1348505 WIRING GP-TRACTION CONTROL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7078 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
4. 2D-0388 [1] GROMMET  
5. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
6. 109-7080 [2] GUARD AS  
7. 9R-5383 [1] BOSS (11X25X20-MM THK)  
8. 9M-8406 [1] CLIP  
9. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
10. 7K-1181 [17] STRAP-CABLE  
11. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
15. 4E-2250 [1] HOUSING  
17. 152-7356 [1] LEVER  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6431 [2] ROD END  
20. 119-4167 [1] ROD  
21. 8T-4133 M [2] NUT (M10X1.5-THD)  
22. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
23. 6V-8211 M [3] BOLT (M6X1X55-MM)  
24. 152-3764 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
25. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 105-3769 Y [1] SENSOR GP-POSITION (ARTICULATION ANGLE)  
28. 2H-3429 [1] RING-RETAINING  
29. 6D-3025 [2] BALL BEARING  
30. 152-7205 [1] SHAFT  
31. 2L-6726 [2] RING-RETAINING  
32. 4J-9448 [3] LUG  
33. 135-4708 [1] HARNESS AS-CONTROL (TRACTION-MAIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS AND WEDGE)
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS AND WEDGE)
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  8T-8737 [58] PLUG-SEAL  
34. 3K-0360 [4] SEAL-O-RING  
35. 135-4705 [1] HARNESS AS-CONTROL (TRACTION-REAR AXLE)  
  102-8808 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
36. 187-5032 CY [1] SERVICE GP-MACHINE (TRACTION CONTROL SYSTEM)  
37. 109-7330 Y [4] SENSOR GP-SPEED (WHEEL SPEED)  
38. 139-8974 [1] HARNESS AS-CONTROL (TRACTION-FRONT AXLE)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS AND WEDGE)
39. 6V-3265 [6] CLIP  
40. 2H-9524 [2] GROMMET  
41. 8T-5387 [2] GROMMET  
42. 109-7079 [2] GUARD AS  
43. 1S-9593 [1] STRAP-CABLE  
44. 9U-2277 [1] CLIP AS  
45. 8L-8413 [1] STRAP-CABLE  
46. 118-9623 [1] PLATE AS  
  6B-4284 [4] RIVET  
47. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
48. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4P-8134 [3] CLIP  
50. 141-7553 [1] PLUG AS  
51. 141-9817 [1] GUARD AS  
52. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
53. 8T-9655 [8] MOUNT-ISOLATION  
54. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
55. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
56. 1S-0994 [1] CLIP  
57. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
58. 141-7552 [1] PLUG AS (FOR IT38G ONLY)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12120023
 

135-2606: WIRING GP-TRACTION CONTROL

135-2606 WIRING GP-TRACTION CONTROL
PART OF 2Q-7880 CONTROL AR-TRACTION
FOR USE WITH ROPS OPEN OR ENCLOSED
i00495970 SEBC1212
1352606 WIRING GP-TRACTION CONTROL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [3] STRAP-CABLE  
2. 115-9476 Y [1] CONTROL GP-TCS DISPLAY ELEK  
3. 134-4092 [1] SWITCH AS-TRACTION CONTROL  
  111-7899 [1] GASKET  
4. 135-1921 [1] HARNESS AS-CAB (TRACTION CONTROL SYSTEM)  
  3E-3385 [1] PLUG AS-CONNECTOR (8-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
5. 137-4221 [1] PLATE  
6. 8T-4171 M [2] BOLT (M6X1X12-MM)  
7. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
8. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12120024
 

2Q-7948: AXLE AR-FIXED

2Q-7948 AXLE AR-FIXED -CUSTOM-NOSPIN
i01171142 SEBC1212
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9C-8172 Y [2] BRAKE & PLANETARY GP  
  4E-3488 NY [1] DIFFERENTIAL GP-NOSPIN  
  100-3810 NY [1] GEAR GP-BEVEL & PINION (FIXED AXLE)  
  100-3811 NY [1] HOUSING GP-FIXED AXLE  
    *****STANDARD REMOVALS*****
  100-3809 N [1] AXLE AR-FIXED (FRONT)  
  N   PART OF STANDARD AXLE AR-FIXED
  Y   SEPARATE ILLUSTRATION
 

#SEBC12120025
 

9C-8172: BRAKE & PLANETARY GP

9C-8172 BRAKE & PLANETARY GP
PART OF 2Q-7948 AXLE AR-FIXED
i00170965 SEBC1212
9C8172 BRAKE & PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-2168 [1] PISTON  
2. 334-1033 [1] DISC-FRICTION  
3. 9M-4335 [3] DOWEL-REACTION  
4. 293-3608 [3] SPRING  
5. 9C-6329 [1] PLATE-REACTION  
6. 4E-2165 [1] GEAR-SUN (18-TEETH)(18 TEETH)  
7. 4E-2166 [1] CARRIER-PLANETARY  
8. 9C-6335 [3] GEAR-PLANETARY (29-TEETH)(29 TEETH)  
9. 9C-6317 [3] SHAFT-PLANETARY  
10. 9C-6318 [3] BEARING-SLEEVE  
11. 9C-6342 [6] WASHER-THRUST  
12. 8T-2925 [3] PIN-SPRING  
13. 8R-1891 [1] GEAR-RING (78-TEETH)(78 TEETH)  
14. 115-5327 [3] DOWEL  
15. 327-3965 [1] SEAL-D-RING  
16. 4E-0211 [1] SEAL  
17. 138-1645 [3] PIN-SPRING  
18. 327-3966 [1] RING-BACKUP  
 

#SEBC12120026
 

2Q-8372: COOLER GP-AXLE OIL

2Q-8372 COOLER GP-AXLE OIL -CUSTOM
i01147744 SEBC1212
2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme 2Q8372 COOLER GP-AXLE OIL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-3408 L [1] V-BELT  
2. 153-3496 L [1] PLATE AS  
2A. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 153-3497 L [1] PLATE  
4. 153-5741 L [1] STRAP  
5. 167-7754 L [1] PLATE AS  
5A. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 168-6451 L [1] PUMP GP-GEAR (AXLE OIL COOLER)  
7. 168-6452 L [1] CLUTCH GP-ELECTRIC (AXLE OIL COOLER PUMP)  
8. 169-2703 L [1] PULLEY  
9. 6V-3960 L [1] BOLT (1/4-28X0.875-IN)  
10. 6V-8188 L [1] NUT (1/2-13-THD)  
11. 7X-0339 L [1] BOLT (1/2-13X6.25-IN)  
12. 7X-3391 L [1] WASHER-HARD (13.5X32X6-MM THK)  
13. 8C-8451 LM [2] BOLT (M6X1X40-MM)  
14. 8T-4121 L [7] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 LM [2] NUT (M10X1.5-THD)  
16. 8T-4136 LM [1] BOLT (M10X1.5X25-MM)  
17. 8T-4139 LM [1] BOLT (M12X1.75X30-MM)  
18. 8T-4185 LM [2] BOLT (M10X1.5X50-MM)  
19. 8T-4196 LM [2] BOLT (M10X1.5X35-MM)  
20. 8T-4205 L [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4223 L [3] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 3D-2824 N [4] SEAL-O-RING  
23. 6V-0301 N [2] ADAPTER  
24. 6V-9746 N [5] SEAL-O-RING  
25. 6V-9853 N [1] ELBOW  
26. 7M-8485 N [4] SEAL-O-RING  
27. 8T-1685 N [2] TEE  
28. 8T-4121 N [8] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4136 NM [8] BOLT (M10X1.5X25-MM)  
30. 8T-8900 N [2] TEE-O-RING PORT  
31. 9R-2060 NM [5] BOSS (M10X1.5X21-MM)  
32. 130-5202 N [2] VALVE GP-CHECK (AXLE OIL COOLER BYPASS)  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
33. 151-5711 N [1] CORE AS-AXLE OIL COOLER  
34. 167-7760 N [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
35. 167-7764 N [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
36. 167-7775 N [1] TUBE AS  
37. 167-7776 N [1] TUBE AS  
38. 5P-4484 P [2] PLUG-MAGNETIC  
39. 7K-1181 P [12] STRAP-CABLE  
40. 7Y-5238 PM [2] U-BOLT (M10X1.5-THD)  
41. 8C-6875 P [4] CONNECTOR  
42. 130-9505 P [2] FILTER-MAGNETIC  
43. 133-3260 P [2] SPACER (11X19X10-MM THK)  
44. 153-5100 P [2] MANIFOLD AS  
45. 167-7755 P [1] PLATE AS  
46. 167-7761 P [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
47. 167-7762 P [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
48. 167-7763 P [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
49. 167-7765 PI [1] HOSE AS  
50. 167-7766 PI [1] HOSE AS  
51. 167-7767 PI [1] HOSE AS  
52. 167-7768 PI [1] HOSE AS  
53. 167-7769 PI [1] HOSE AS  
54. 167-7770 PI [1] HOSE AS  
55. 167-7771 PI [1] HOSE AS  
56. 167-7772 PI [1] HOSE AS  
57. 167-7773 PI [1] HOSE AS  
58. 167-7774 PI [1] HOSE AS  
59. 167-7777 P [2] TUBE AS  
60. 167-7778 P [2] TUBE AS  
61. 168-6453 P [4] ELBOW  
62. 2M-9780 P [2] SEAL-O-RING  
63. 2P-1293 P [2] LOCKNUT (1-3/16-12-THD)  
64. 3D-2824 P [2] SEAL-O-RING  
65. 3J-1907 P [4] SEAL-O-RING  
66. 3K-0360 P [4] SEAL-O-RING  
67. 5D-0718 P [2] CLIP  
68. 5K-9090 P [8] SEAL-O-RING  
70. 5P-7468 P [2] CLIP (SLOT)  
71. 5P-7469 P [2] CLIP (TAB)  
72. 5P-8444 P [2] GROMMET  
73. 6V-1889 P [3] CLIP  
74. 6V-8397 P [4] SEAL-O-RING  
75. 6V-8398 P [4] SEAL-O-RING  
76. 6V-8629 P [2] ELBOW  
77. 6V-8635 P [2] CONNECTOR  
78. 6V-8636 P [4] CONNECTOR  
79. 6V-8997 P [2] UNION  
80. 6V-9158 P [2] TEE-UNION  
81. 6V-9192 P [1] CLIP  
82. 6V-9746 P [11] SEAL-O-RING  
83. 6V-9853 P [1] ELBOW  
84. 7D-7233 P [3] CLIP  
85. 7J-9108 P [2] SEAL-O-RING  
86. 7M-8485 P [10] SEAL-O-RING  
88. 8T-4121 P [16] WASHER-HARD (11X21X2.5-MM THK)  
89. 8T-4133 PM [6] NUT (M10X1.5-THD)  
90. 8T-4136 PM [4] BOLT (M10X1.5X25-MM)  
91. 8T-4137 PM [3] BOLT (M10X1.5X20-MM)  
92. 8T-4139 PM [2] BOLT (M12X1.75X30-MM)  
93. 8T-4195 PM [1] BOLT (M10X1.5X30-MM)  
94. 8T-4196 PM [2] BOLT (M10X1.5X35-MM)  
95. 8T-4223 P [2] WASHER-HARD (13.5X25.5X3-MM THK)  
96. 8T-6684 P [2] ELBOW  
97. 9R-2060 PM [1] BOSS (M10X1.5X21-MM)  
98. 9S-4185 P [3] PLUG-O-RING  
99. 090-8247 P [1] BLOCK  
100. 107-2344 PM [1] BOSS (M10X1.5X60-MM)  
101. 5D-1026 Q [4] CLAMP-BAND  
102. 6V-1438 Q [2] CONNECTOR  
103. 8T-0119 Q [1] ELBOW  
104. 3D-2824 Q [1] SEAL-O-RING  
105. 3K-0360 Q [3] SEAL-O-RING  
106. 6V-1722 Q [1] ADAPTER-O-RING  
107. 5P-0767 EQ HOSE (432CM)  
108. 106-9013 S [1] PLATE  
109. 167-7759 S [1] PLATE AS  
  8T-3597 SM [2] NUT-WELD (M12X1.75-THD)  
110. 5P-1076 S [10] WASHER-HARD (13.5X30X4-MM THK)  
111. 8T-4139 SM [10] BOLT (M12X1.75X30-MM)  
112. 167-7756 T [2] PLATE AS  
113. 167-7757 T [2] PLATE AS  
114. 167-7758 T [2] PLATE  
115. 5P-8247 T [16] WASHER-HARD (17X32X3.5-MM THK)  
116. 7X-0618 T [12] WASHER-HARD (13.5X40X5-MM THK)  
117. 8T-0282 TM [8] BOLT (M16X2X120-MM)  
118. 8T-4956 TM [12] BOLT (M12X1.75X35-MM)  
119. 8T-5002 TM [8] BOLT (M16X2X180-MM)  
120. 130-5300 V [1] CLIP  
121. 155-8998 V [1] SWITCH AS-TEMPERATURE (AXLE OIL COOLER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS AND WEDGE)
122. 168-9061 V [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
123. 168-9088 V [1] HARNESS AS-AXLE (OIL COOLER)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  8T-8737 [5] PLUG-SEAL  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
124. 172-8681 V [1] CLIP  
125. 172-8713 V [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
126. 173-7471 V [1] PLATE AS  
  8C-3334 [2] RIVET-TUBULAR  
  8Y-4489 M [2] BOSS (M10X1.5-THD)  
127. 173-7472 V [1] COVER  
128. 115-3070 V [1] CLIP AS-CONNECT (4-PIN)  
129. 1V-1984 V [1] CLIP  
130. 4D-9517 V [1] CLIP  
131. 6V-3265 V [1] CLIP  
132. 8T-4121 V [5] WASHER-HARD (11X21X2.5-MM THK)  
133. 8T-4137 VM [1] BOLT (M10X1.5X20-MM)  
134. 8T-4191 VM [2] BOLT (M10X1.5X16-MM)  
135. 8T-4195 VM [2] BOLT (M10X1.5X30-MM)  
   
    NOTE:
    IF THIS KIT IS INSTALLED ON MACHINES
    PRIOR TO SERIAL # 4YS00714 (938G) OR
    7SB00552 (IT38G), SERVICE LETTER SEBE 6836
    MUST BE USED TO UPDATE ALTERNATOR AND/OR
    A/C BELT DRIVES, INCLUDING RELOCATING THE A/C ACCUMULATOR DRYER TO THE TOP OF
    THE HYDRAULIC TANK.
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   PART OF STANDARD PUMP & MOUNTING GP-AXLE OIL COOLER
  M   METRIC PART
  N   PART OF STANDARD MOUNTING GP-AXLE OIL COOLER
  P   PART OF STANDARD LINES GP-AXLE OIL COOLER
  Q   PART OF STANDARD LINES GP-WATER
  S   PART OF STANDARD GUARD GP-POWER TRAIN
  T   PART OF GUARD GP-AXLE OIL COOLER
  V   PART OF STANDARD WIRING GP-ELECTRIC CLUTCH
 

#SEBC12120027
 

4E-3488: DIFFERENTIAL GP-NOSPIN

4E-3488 DIFFERENTIAL GP-NOSPIN
PART OF 2Q-7948 AXLE AR-FIXED
i00170030 SEBC1212
4E3488 DIFFERENTIAL GP-NOSPIN Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-3191 [1] CASE AS-DIFFERENTIAL  
1A. 5P-8245 J [4] WASHER-HARD (13.5X25.5X3-MM THK)  
1B. 8T-0646 JM [4] BOLT (M12X1.75X110-MM)  
2. 8R-9833 Y [1] DIFFERENTIAL GP-NOSPIN  
  J   PARTS MARKED J ARE FOR SHIPPING & STORAGE ONLY, REMOVE BEFORE INSTALLATION INTO AXLE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12120028
 

8R-9833: DIFFERENTIAL GP-NOSPIN

8R-9833 DIFFERENTIAL GP-NOSPIN
PART OF 4E-3488 DIFFERENTIAL GP-NOSPIN
i00167930 SEBC1212
8R9833 DIFFERENTIAL GP-NOSPIN Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-9831 [1] CAM AS-SPIDER  
2. 3V-0908 [2] CLUTCH & RING AS  
3. 3V-0905 [2] SPRING-CONICAL  
4. 3V-0906 [2] RETAINER  
5. 8R-9830 [2] GEAR-SIDE (35 TEETH)  
6. 8R-9832 [1] BLOCK-SPACER  
 

#SEBC12120029
 

2Q-7968: FILLER GP-POWER TRAIN OIL

2Q-7968 FILLER GP-POWER TRAIN OIL -CUSTOM
PART OF 2Q-7935 GUARD GP-ARTICULATION
i01175272 SEBC1212
2Q7968 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-6905 [1] VALVE-BREATHER  
  3K-6909 [1] HINGE AS  
2. 9C-7456 [1] GAUGE  
3. 5V-8451 [1] HASP  
4. 124-0174 [1] CLIP  
5. 7S-8920 [1] CLIP (SLOT)  
6. 7S-8921 [1] CLIP (TAB)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
8. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4133 M [1] NUT (M10X1.5-THD)  
10. 2Q-3857 [1] TUBE AS  
11. 2Q-3856 [1] TUBE AS  
12. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
13. 1P-3707 [1] SEAL-RECTANGULAR  
14. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
15. 4K-5537 [1] GASKET  
16. 5K-1568 [1] CAP-FILLER  
17. 6H-5139 [1] PLATE-PRESSURE  
18. 6F-5188 [1] SEAL-RING  
19. 4B-9782 [1] BALL  
  M   METRIC PART
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Engine Starting with Auxiliary Start Receptacle - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Circuit Breakers - Reset
938G Wheel Loader and IT38G Integrated Toolcarrier
Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery or Battery Cable - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Temperature Sender (Torque Converter Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train
Temperature Sender (Hydraulic Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Wheel Speed Sensor
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System
Toggle Switch (Hood Tilt)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Temperature Switch (Axle Oil Cooler)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Test/Enable Switch
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM)
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Operator Display
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Sensors
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Data Link
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Brake Air Purge Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Harness Code Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Switches
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Sensors
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Sensors
Payload Control System (PCS) 2.X
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Testing and Adjusting
Articulation Angle Position Sensor - Adjust and Calibrate
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wheel Speed Sensor - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electric Starting System - Test
3114, 3116, and 3126 Engines
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
System Schematic
Machine Security System
Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Remote Direction Switch - Disable
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Flash Program
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Open Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Short Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Connector - Inspect
Work Area Visual System
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Electrical Component and Connector Locations
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0190 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0191 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0367 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0621 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Toggle Switch (Automatic/Manual)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Limit Switch (Parking Brake)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
General Information
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Connector Locations
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Code List
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Capabilities
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0248 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 00
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0605 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0606 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0607 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0616 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0653 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0687 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Component and Connector Locations
Machine Security System
Connector Locations
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electrical Component and Connector Locations
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Procedure to Disable Top Gears {3168}
2000/02/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06
Correction to Operation and Maintenance Manual , "Transmission Neutralizer Override Control" {7332, 7451}
2001/12/17
Improved Pressure Switch Now Used {1435}
2004/04/19
Improved Service Meter Used {7478}
2004/05/03
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
An Improved Backup Alarm is Now Available {7406}
2009/01/26
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 938G :

SWITCH GP-SECONDARY STEERING
143-2477 SWITCH GP-SECONDARY STEERING
SERVICE GP-MACHINE
187-5032 SERVICE GP-MACHINE
SENSOR GP-SPEED
109-7330 SENSOR GP-SPEED
SENSOR GP-POSITION
105-3769 SENSOR GP-POSITION
CONTROL GP-TCS DISPLAY ELEK
115-9476 CONTROL GP-TCS DISPLAY ELEK
CONTROL GP-SECONDARY STEERING
3E-5184 CONTROL GP-SECONDARY STEERING
CONTROL GP-POSITION
176-5459 CONTROL GP-POSITION
CONTROL GP-POSITION
116-2025 CONTROL GP-POSITION
WIRING GP-SECONDARY STEERING
143-2469 WIRING GP-SECONDARY STEERING
WIRING GP-TRACTION CONTROL
134-8505 WIRING GP-TRACTION CONTROL
WIRING GP-TRACTION CONTROL
135-2606 WIRING GP-TRACTION CONTROL
2Q-7948 AXLE AR-FIXED
BRAKE & PLANETARY GP
9C-8172 BRAKE & PLANETARY GP
COOLER GP-AXLE OIL
2Q-8372 COOLER GP-AXLE OIL
DIFFERENTIAL GP-NOSPIN
4E-3488 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-NOSPIN
8R-9833 DIFFERENTIAL GP-NOSPIN

Truck sale:

 
 
Caterpillar 938G
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 938G, forks, Construction
 
Caterpillar 938G, forks, Construction
- forks
HOLT CAT
Caterpillar 938 G, Wheel Loaders, Construction
42,748 
Caterpillar 938 G, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR ROMANIA
 
32,500 
Caterpillar 938G, Wheel Loaders, Construction


Caterpillar 938G, Wheel Loaders, Construction
29,255 
Caterpillar 938G, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.