AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-8459 COOLER AR-AXLE OIL CUSTOM 990 II WHEEL LOADER


POWER TRAIN
COOLER GP
DIFFERENTIAL & BEVEL GEAR GP
FILTER GP
COOLER GP
MOTOR GP

WHEEL LOADER 990 II WHEEL LOADER BCR
 Custom Product Support Literature for the 990 Series II Wheel Loader BCR00001-UP (MACHINE) SEBC1319 990 II BCR   (1999)

POWER TRAIN

COOLER GP
BLOCK GP-HYDRAULIC
229-5373 BLOCK GP-HYDRAULIC
BLOCK GP-HYDRAULIC
229-5373 BLOCK GP-HYDRAULIC
COOLER & MTG GP-AXLE OIL
243-6010 COOLER & MTG GP-AXLE OIL
2Q-8459 COOLER AR-AXLE OIL
LINES GP-AXLE OIL COOLER
261-2125 LINES GP-AXLE OIL COOLER
PUMP & MOTOR GP-AXLE OIL CLR
261-0544 PUMP & MOTOR GP-AXLE OIL CLR
130-5202 VALVE GP-CHECK
 

#SEBC13190040
 

2Q-8459: COOLER AR-AXLE OIL

2Q-8459 COOLER AR-AXLE OIL
CUSTOM
i02169821 SEBC1319
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  243-6031 Y [1] AXLE AR-FIXED (FRONT)  
  243-6032 Y [1] AXLE AR-OSCILLATING (REAR)  
  243-6010 Y [1] COOLER & MTG GP-AXLE OIL  
  243-6005 Y [1] HARDWARE GP-REAR FRAME  
  261-2125 Y [1] LINES GP-AXLE OIL COOLER  
  261-0544 Y [1] PUMP & MOTOR GP-AXLE OIL CLR  
  243-6055 Y [1] SENSOR GP-TEMPERATURE  
  261-6717 [1] SHIELD AS (RH)  
   
    *****STANDARD REMOVAL*****
  8R-5470 AJ [1] AXLE AR-FIXED (FRONT)  
  8R-5466 AJ [1] AXLE AR-OSCILLATING (REAR)  
  195-3195 AL [1] SHIELD  
   
    *****ATTACHMENT REMOVAL*****
  152-5273 AN [1] AXLE AR-FIXED (FRONT)  
  152-5276 AN [1] AXLE AR-OSCILLATING (REAR)  
  A   NOT PART OF THIS GROUP
  J   PART OF STANDARD POWER TRAIN AR
  L   PART OF STANDARD SHIELD GP-ENGINE COMPARTMENT
  N   PART OF ATTACHMENT AXLE AR-FIXED & OSCILLATING
  Y   SEPARATE ILLUSTRATION
 

#SEBC13190041
 

121-4658: DIFFERENTIAL & BEVEL GEAR GP

121-4658 DIFFERENTIAL & BEVEL GEAR GP
PART OF 227-3336 AXLE AR-FIXED, 227-3337 AXLE AR-OSCILLATING
Type 1
i00167409 SEBC1319
1214658 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-6230 [1] SEAL-O-RING  
2. 034-3557 [6] BOLT-LOCKING (3/8-16X1.125-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 101-0365 [1] HOUSING-PINION  
5. 5P-7843 [1] CUP-BEARING  
6. 8F-1610 [1] CONE-BEARING  
7. 1D-4626 [54] BOLT (7/8-9X2.75-IN)  
8. 5P-8249 [92] WASHER-HARD (24X41.5X4-MM THK)  
9. 2M-3340 [1] SEAL-O-RING  
10. 1V-7750 B [2] SPACER (27X44.5X57-MM THK)  
11. 2D-6506 [1] SEAL-O-RING  
12. 6W-8399 [1] NUT-ADJUSTMENT  
13. 5K-8454 [2] BOLT (1/2-13X1.12-IN)  
14. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9K-4454 [2] LOCK  
16. 1M-6573 [1] CUP-BEARING (TAPERED ROLLER)  
17. 9M-2744 [1] CONE-BEARING (TAPERED ROLLER)  
18. 120-0550 Y [1] DIFFERENTIAL GP  
19. 100-7417 [1] SHAFT-BEVEL PINION  
20. 100-7418 [1] GEAR-BEVEL (53-TEETH)  
21. 6W-8401 [1] PIN  
22. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
23. 5V-5670 [1] COVER  
24. 5V-5669 B [1] SHIM PACK (INCLUDES 15-SHIMS)  
25. 2H-3932 [1] SEAL-O-RING  
26. 126-8181 [1] CONE-BEARING  
27. 126-8182 [1] CUP-BEARING  
28. 6W-8400 [1] NUT-ADJUSTMENT  
29. 1V-2718 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
30. 5P-8043 [1] CONE-BEARING  
31. 5P-8044 [1] CUP-BEARING  
32. 141-8570 [1] WASHER (110.4X155.2X7-MM)  
33. 9C-5276 [1] NUT-STAKE  
34. 9S-1351 B [2] BOLT (7/8-9X5-IN)  
35. 138-1843 C [1] RETAINER  
36. 133-4296 C [1] SEAL-LIP TYPE  
37. 1D-4626 B [2] BOLT (7/8-9X2.75-IN)  
38. 9S-9334 [2] PLUG-O-RING  
39. 7M-8485 [2] SEAL-O-RING  
40. 9S-8004 [1] PLUG-O-RING  
41. 3J-1907 [1] SEAL-O-RING  
42. 119-6019 [1] CARRIER AS-DIFFERENTIAL  
43. 4K-0684 [4] WASHER-HARD (34X55X6-MM THK)  
44. 6V-2624 [4] BOLT (1-1/4-7X7-IN)  
45. 7V-9514 [4] SLEEVE  
46. Z CAP  
47. 6F-7035 [36] BOLT (7/8-14X2.25-IN)  
   
    AVAILABLE REPAIR KIT(S):
  163-7294 [1] KIT-BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBC13190042
 

121-4658: DIFFERENTIAL & BEVEL GEAR GP

121-4658 DIFFERENTIAL & BEVEL GEAR GP
PART OF 227-3336 AXLE AR-FIXED, 227-3337 AXLE AR-OSCILLATING
Type 2
i01972675 SEBC1319
1214658 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-6230 J [1] SEAL-O-RING  
2. 034-3557 [6] BOLT-LOCKING (3/8-16X1.125-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 101-0365 [1] HOUSING-PINION  
5. 5P-7843 J [1] CUP-BEARING  
6. 8F-1610 [1] CONE-BEARING  
7. 1D-4626 [54] BOLT (7/8-9X2.75-IN)  
8. 5P-8249 [92] WASHER-HARD (24X41.5X4-MM THK)  
9. 2M-3340 J [1] SEAL-O-RING  
10. 1V-7750 B [2] SPACER (27X44.5X57-MM THK)  
11. 2D-6506 J [1] SEAL-O-RING  
12. 6W-8399 [1] NUT-ADJUSTMENT  
13. 5K-8454 [2] BOLT (1/2-13X1.12-IN)  
14. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9K-4454 [2] LOCK  
16. 1M-6573 J [1] CUP-BEARING (TAPERED ROLLER)  
17. 9M-2744 J [1] CONE-BEARING (TAPERED ROLLER)  
18. 120-0550 Y [1] DIFFERENTIAL GP  
19. 356-4196 [1] SET-BEVEL GEAR  
  356-4195 [1] SHAFT-BEVEL PINION  
  100-7418 [1] GEAR-BEVEL (53-TEETH)  
21. 6W-8401 [1] PIN  
22. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
23. 5V-5670 [1] COVER  
24. 5V-5669 B [1] SHIM PACK (INCLUDES 15-SHIMS)  
25. 2H-3932 J [1] SEAL-O-RING  
26. 126-8181 J [1] CONE-BEARING  
27. 126-8182 J [1] CUP-BEARING  
28. 6W-8400 [1] NUT-ADJUSTMENT  
29. 1V-2718 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
30. 2J-7138 J [1] CONE-BEARING (TAPERED ROLLER)  
31. 2J-7137 J [1] CUP-BEARING  
32. 141-8570 [1] WASHER (110.4X155.2X7-MM)  
33. 245-3078 [1] NUT-STAKE  
34. 9S-1351 B [2] BOLT (7/8-9X5-IN)  
35. 138-1843 [1] RETAINER  
36. 133-4296 J [1] SEAL-LIP TYPE  
37. 1D-4626 B [2] BOLT (7/8-9X2.75-IN)  
    (USED IN PLACE OF ITEMS 39 & 40 ON MODEL 4FR/2KZ FRONT AXLE ONLY)
38. 9S-9334 C [1] PLUG-O-RING  
39. 7M-8485 CJ [1] SEAL-O-RING  
40. 9S-8004 [1] PLUG-O-RING  
41. 3J-1907 J [1] SEAL-O-RING  
42. 237-5524 C [1] CARRIER AS-DIFFERENTIAL  
43. 4K-0684 [4] WASHER-HARD (34X55X6-MM THK)  
44. 6V-2624 [4] BOLT (1-1/4-7X7-IN)  
45. 7V-9514 [4] SLEEVE  
46. Z CAP  
47. 6F-7035 [36] BOLT (7/8-14X2.25-IN)  
48. 9S-8010 [1] PLUG  
49. 2S-4078 J [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  163-7294 J [1] KIT-BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PARTS MARKED J
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBC13190043
 

151-6431: DIFFERENTIAL & BEVEL GEAR GP

151-6431 DIFFERENTIAL & BEVEL GEAR GP
PART OF 152-5273 AXLE AR-FIXED, 152-5276 AXLE AR-OSCILLATING
Type 1
i01071579 SEBC1319
1516431 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-6230 [1] SEAL-O-RING  
2. 034-3557 [6] BOLT-LOCKING (3/8-16X1.125-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 101-0365 [1] HOUSING-PINION  
5. 5P-7843 [1] CUP-BEARING  
7. 1D-4626 [44] BOLT (7/8-9X2.75-IN)  
8. 5P-8249 [92] WASHER-HARD (24X41.5X4-MM THK)  
9. 2M-3340 [1] SEAL-O-RING  
10. 119-6019 [1] CARRIER AS-DIFFERENTIAL  
  4K-0684 [4] WASHER-HARD (34X55X6-MM THK)  
  6V-2624 [4] BOLT (1-1/4-7X7-IN)  
  7V-9514 [4] SLEEVE  
11. 2D-6506 [1] SEAL-O-RING  
12. 6W-8399 [1] NUT-ADJUSTMENT  
13. 5K-8454 [2] BOLT (1/2-13X1.12-IN)  
14. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9K-4454 [2] LOCK  
16. 1M-6573 [1] CUP-BEARING (TAPERED ROLLER)  
17. 9M-2744 [1] CONE-BEARING (TAPERED ROLLER)  
18. 151-6409 Y [1] DIFFERENTIAL GP  
19. 100-7417 [1] SHAFT-BEVEL PINION  
  100-7418 [1] GEAR-BEVEL (53-TEETH)  
20. 6F-7035 [36] BOLT (7/8-14X2.25-IN)  
21. 6W-8401 [1] PIN  
22. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
23. 5V-5670 [1] COVER  
24. 5V-5669 B [1] SHIM PACK (INCLUDES 15-SHIMS)  
25. 2H-3932 [1] SEAL-O-RING  
26. 126-8181 [1] CONE-BEARING  
27. 126-8182 [1] CUP-BEARING  
28. 6W-8400 [1] NUT-ADJUSTMENT  
29. 1V-2718 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
30. 5P-8043 [1] CONE-BEARING  
31. 5P-8044 [1] CUP-BEARING  
32. 141-8570 [1] WASHER (110.4X155.2X7-MM)  
33. 9C-5276 [1] NUT-STAKE  
34. 138-1843 [1] RETAINER  
35. 9S-9334 [2] PLUG-O-RING  
36. 7M-8485 [2] SEAL-O-RING  
37. 9S-8004 [1] PLUG-O-RING  
38. 3J-1907 [1] SEAL-O-RING  
39. 1V-7750 D [2] SPACER (27X44.5X57-MM THK)(57MM THK)  
40. 9S-1351 [2] BOLT (7/8-9X5-IN)  
41. 3P-8283 [12] SPACER (0.908X1.5X1-IN THK)  
42. 133-4296 [1] SEAL-LIP TYPE  
43. 153-1807 [12] BOLT (7/8-9X3.75-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBC13190044
 

151-6431: DIFFERENTIAL & BEVEL GEAR GP

151-6431 DIFFERENTIAL & BEVEL GEAR GP
PART OF 152-5273 AXLE AR-FIXED, 152-5276 AXLE AR-OSCILLATING
Type 2
i01972676 SEBC1319
1516431 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-6230 [1] SEAL-O-RING  
2. 034-3557 [6] BOLT-LOCKING (3/8-16X1.125-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 101-0365 [1] HOUSING-PINION  
5. 5P-7843 [1] CUP-BEARING  
6. 124-9536 [1] CONE-BEARING  
7. 1D-4626 [42] BOLT (7/8-9X2.75-IN)  
8. 5P-8249 [92] WASHER-HARD (24X41.5X4-MM THK)  
9. 2M-3340 [1] SEAL-O-RING  
10. 237-5524 C [1] CARRIER AS-DIFFERENTIAL  
  4K-0684 [4] WASHER-HARD (34X55X6-MM THK)  
  6V-2624 [4] BOLT (1-1/4-7X7-IN)  
  7V-9514 [4] SLEEVE  
11. 2D-6506 [1] SEAL-O-RING  
12. 6W-8399 [1] NUT-ADJUSTMENT  
13. 5K-8454 [2] BOLT (1/2-13X1.12-IN)  
14. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9K-4454 [2] LOCK  
16. 1M-6573 [1] CUP-BEARING (TAPERED ROLLER)  
17. 9M-2744 [1] CONE-BEARING (TAPERED ROLLER)  
18. 151-6409 Y [1] DIFFERENTIAL GP  
19. 356-4196 [1] SET-BEVEL GEAR  
  356-4195 [1] SHAFT-BEVEL PINION  
  100-7418 [1] GEAR-BEVEL (53-TEETH)  
20. 6F-7035 [36] BOLT (7/8-14X2.25-IN)  
21. 6W-8401 [1] PIN  
22. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
23. 5V-5670 [1] COVER  
24. 5V-5669 B [1] SHIM PACK (INCLUDES 15-SHIMS)  
25. 2H-3932 [1] SEAL-O-RING  
26. 126-8181 [1] CONE-BEARING  
27. 126-8182 [1] CUP-BEARING  
28. 6W-8400 [1] NUT-ADJUSTMENT  
29. 1V-2718 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
30. 2J-7138 [1] CONE-BEARING (TAPERED ROLLER)  
31. 2J-7137 [1] CUP-BEARING  
32. 141-8570 [1] WASHER (110.4X155.2X7-MM)  
33. 245-3078 [1] NUT-STAKE  
34. 138-1843 [1] RETAINER  
35. 9S-9334 C [1] PLUG-O-RING  
36. 7M-8485 C [1] SEAL-O-RING  
37. 9S-8004 [1] PLUG-O-RING  
38. 3J-1907 [1] SEAL-O-RING  
39. 1V-7750 B [2] SPACER (27X44.5X57-MM THK)(57MM THK)  
40. 9S-1351 [2] BOLT (7/8-9X5-IN)  
41. 3P-8283 [12] SPACER (0.908X1.5X1-IN THK)  
42. 133-4296 [1] SEAL-LIP TYPE  
43. 153-1807 [12] BOLT (7/8-9X3.75-IN)  
44. 9S-8010 C [1] PLUG  
45. 2S-4078 C [1] SEAL-O-RING  
46. 1D-4626 [2] BOLT (7/8-9X2.75-IN)  
    (USED IN PLACE OF ITEMS 39 & 40 ON MODEL 4FR FRONT AXLE ONLY)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBC13190045
 

120-0550: DIFFERENTIAL GP

120-0550 DIFFERENTIAL GP
PART OF 121-4658 DIFFERENTIAL & BEVEL GEAR GP
i00167406 SEBC1319
1200550 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-9064 [4] NUT (2-1/8-12-THD)  
2. 4D-7534 [4] BEARING AS-ROLLER  
3. 4D-7536 [4] LOCKNUT  
4. 5T-5185 [4] PINION (16-TEETH)  
5. 358-9130 [2] WASHER  
6. 9V-4373 [4] RETAINER  
7. 9V-9840 [1] SPIDER  
8. 358-7234 [1] CASE AS-DIFFERENTIAL  
  6V-8198 M [8] BOLT (M24X3X200-MM)  
  9H-1031 [8] WASHER-HARD (24X41.5X6-MM THK)  
9. 335-3209 [2] GEAR-BEVEL (20-TEETH)  
10. 8C-7562 M [8] SCREW-FLAT HEAD (M8X1.25X20-MM)  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBC13190046
 

151-6409: DIFFERENTIAL GP

151-6409 DIFFERENTIAL GP
PART OF 151-6431 DIFFERENTIAL & BEVEL GEAR GP
i01071576 SEBC1319
1516409 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-7234 [1] CASE AS-DIFFERENTIAL  
  6V-8198 M [8] BOLT (M24X3X200-MM)  
  9H-1031 [8] WASHER-HARD (24X41.5X6-MM THK)  
2. 358-9130 [2] WASHER  
3. 8C-7562 M [8] SCREW-FLAT HEAD (M8X1.25X20-MM)  
4. 5T-5185 [4] PINION (16-TEETH)  
5. 151-6395 [2] GEAR-DIFFERENTIAL (59-TEETH)  
6. 4D-7534 [4] BEARING AS-ROLLER  
7. 4D-7536 [4] LOCKNUT  
8. 9V-4373 [4] RETAINER  
9. 2F-9064 [4] NUT (2-1/8-12-THD)  
10. 9V-9840 [1] SPIDER  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBC13190047
 

230-3633: FILTER GP-OIL

230-3633 FILTER GP-OIL -AXLE OIL COOLER
PART OF 261-2125 LINES GP-AXLE OIL COOLER
i01972001 SEBC1319
2303633 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-6709 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
2. 222-6713 [1] FILTER-OIL (AXLE OIL COOLER)(AXLE OIL COOLER)  
 

#SEBC13190048
 

261-2125: LINES GP-AXLE OIL COOLER

261-2125 LINES GP-AXLE OIL COOLER
CUSTOM
PART OF 2Q-8459 COOLER AR-AXLE OIL
i02337217 SEBC1319
2612125 LINES GP-AXLE OIL COOLER Parts scheme 2612125 LINES GP-AXLE OIL COOLER Parts scheme 2612125 LINES GP-AXLE OIL COOLER Parts scheme 2612125 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-4778 [1] SPACER  
2. 197-3295 [2] FLANGE-HALF  
3. 210-8375 [1] SPACER (10.5X16X13-MM THK)  
4. 229-5373 Y [1] BLOCK GP-HYDRAULIC  
5. 230-3633 Y [2] FILTER GP-OIL (AXLE OIL COOLER)  
6. 237-4686 [1] PLATE  
7. 242-0315 [3] SPACER (25.5X44.5X47-MM THK)  
8. 243-5962 [2] CHANNEL AS  
    (EACH INCLUDES)
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
9. 243-5972 [1] BRACKET  
10. 243-5973 [1] BRACKET  
11. 243-5977 I [1] HOSE AS  
12. 243-5978 I [1] HOSE AS  
13. 243-5979 I [1] HOSE AS  
14. 243-5981 I [1] HOSE AS  
15. 243-5982 I [1] HOSE AS  
16. 243-5983 I [1] HOSE AS  
17. 243-5984 [1] TUBE AS  
18. 243-5985 [1] TUBE AS  
19. 243-5986 [1] TUBE AS  
20. 243-5987 [1] TUBE AS  
21. 243-5988 [1] TUBE AS  
22. 243-5989 [1] TUBE AS  
23. 243-5990 [1] TUBE AS  
24. 243-5997 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
25. 243-6002 [2] CHANNEL AS  
    (EACH INCLUDES)
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
26. 243-6004 I [1] HOSE AS  
27. 243-6008 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
28. 243-6019 [2] ANGLE  
29. 243-6041 [1] GUARD (LH)  
30. 243-6042 [1] GUARD (RH)  
31. 252-8824 [1] TUBE AS  
32. 252-8825 [1] TUBE AS  
33. 252-8827 [1] PLATE  
34. 261-2126 [1] BRACKET  
35. 261-2127 [1] TUBE AS  
36. 261-2128 [1] TUBE AS  
37. 261-2130 [1] PLATE  
38. 261-2136 [1] PLATE  
39. 261-2173 [1] BRACKET  
40. 261-2224 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
41. 261-2818 [1] BLOCK GP-HYDRAULIC  
42. 261-2819 I [1] HOSE AS  
43. 261-2820 I [1] HOSE AS  
44. 261-2821 I [1] HOSE AS  
45. 261-2822 I [1] HOSE AS  
46. 261-3844 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
47. 266-4250 [1] PLATE  
48. 148-8324 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  6V-9874 [1] CONNECTOR (STRAIGHT)  
49. 148-8334 [3] CONNECTOR AS  
    (EACH INCLUDES)
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8T-3611 [1] CONNECTOR  
50. 148-8335 [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
51. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW  
52. 148-8356 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  6V-9009 [1] ELBOW  
53. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
54. 148-8392 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
55. 153-6230 [2] CONNECTOR AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-9386 [1] CONNECTOR  
56. 153-6262 [1] UNION AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8734 [1] UNION  
57. 155-7328 [2] ELBOW AS  
    (EACH INCLUDES)
  5P-7701 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  8C-3093 [1] SEAL-O-RING  
58. 164-5577 [1] ELBOW AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8984 [1] ELBOW  
59. 164-5592 [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8C-3751 [1] ELBOW  
60. 169-7394 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8C-3370 [1] CONNECTOR  
61. 171-6720 [2] ELBOW AS  
    (EACH INCLUDES)
  8T-0315 [1] SEAL-O-RING  
  102-3437 [1] ELBOW  
62. 1P-3705 [2] SEAL-RECTANGULAR  
63. 1P-4579 [6] FLANGE-HALF  
64. 3S-7608 [2] CLIP  
65. 4J-0522 [1] SEAL-O-RING  
66. 4J-0524 [3] SEAL-O-RING  
67. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
68. 5K-9660 [2] CLIP  
69. 5P-7466 [1] CLIP (SLOT)  
70. 5P-7467 [1] CLIP (TAB)  
71. 5P-7468 [8] CLIP (SLOT)  
72. 5P-7469 [8] CLIP (TAB)  
73. 5P-7470 [5] CLIP (SLOT)  
74. 5P-7471 [5] CLIP (TAB)  
75. 5P-7703 [3] GROMMET  
76. 5P-8112 [1] GROMMET  
77. 5P-8182 [2] GROMMET  
78. 5P-8444 [6] GROMMET (37-MM ID)  
79. 6V-1874 [2] GROMMET  
80. 6V-9172 [1] NUT (1-7/16-12-THD)  
81. 7D-1553 [1] CLIP  
82. 7D-7233 [1] CLIP  
83. 7K-1401 [3] CLIP  
84. 7K-1402 [3] BRACKET  
85. 7L-6326 [1] CLIP  
86. 7X-0389 [3] BOLT (7/8-9X4.75-IN)  
87. 7X-3392 [4] WASHER-HARD (13.5X22.5X3-MM THK)  
88. 8C-6913 [3] WASHER-HARD (24X41.5X4-MM THK)  
89. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
90. 8T-4133 M [7] NUT (M10X1.5-THD)  
91. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
92. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
93. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
94. 8T-4183 M [5] BOLT (M12X1.75X40-MM)  
95. 8T-4184 M [12] BOLT (M12X1.75X45-MM)  
96. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
97. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
98. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
99. 8T-4223 [47] WASHER-HARD (13.5X25.5X3-MM THK)  
100. 8T-4244 M [7] NUT (M12X1.75-THD)  
101. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
102. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
103. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
104. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
105. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
106. 8T-5041 M [3] BOLT (M12X1.75X120-MM)  
107. 9X-2503 [1] CLIP  
108. 9X-6375 [3] CLIP (SLOT)  
109. 9X-6376 [3] CLIP (TAB)  
110. 5P-1255 E HOSE (110-CM)  
   
    ****STANDARD REMOVAL****
  9U-0169 AFJ [1] GUARD AS  
  9U-0172 AFJ [1] GUARD AS  
  9U-0203 AFJ [1] BRACKET AS  
  101-0606 AFJ [4] GUARD AS  
  8T-6466 AFJM [2] BOLT (M10X1.5X60-MM)  
  152-9766 AFL [1] PLATE-ADAPTER  
  202-3191 AFN [1] TUBE AS  
  207-2922 AFJ [1] GUARD  
  207-2923 AFJ [1] GUARD  
  125-0052 AFP [1] PLATE AS  
  7X-0387 AFP [3] BOLT (7/8-9X4-IN)  
  7Y-0336 AFP [3] SPACER (24.5X44X24-MM THK)  
  5P-1255 AEFS HOSE (100-CM)  
  A   NOT PART OF THIS GROUP
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF STANDARD LINES GP-SERVICE BRAKE
  L   PART OF STANDARD LINES GP-HYDRAULIC
  M   METRIC PART
  N   PART OF STANDARD LINES GP-HYDRAULIC FAN
  P   PART OF STANDARD SENSOR GP-TEMPERATURE
  S   PART OF STANDARD FUMES DISPOSAL GP
  Y   SEPARATE ILLUSTRATION
 

#SEBC13190049
 

261-0544: PUMP & MOTOR GP-AXLE OIL CLR

261-0544 PUMP & MOTOR GP-AXLE OIL CLR
CUSTOM
PART OF 2Q-8459 COOLER AR-AXLE OIL
i02337218 SEBC1319
2610544 PUMP & MOTOR GP-AXLE OIL CLR Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-3964 [1] V-BELT  
2. 8S-5383 [1] BLOCK  
3. 127-0366 [4] SPACER (11X32X24-MM THK)  
4. 140-6329 [1] SPACER (14.3X25.4X33.3-MM THK)  
5. 168-6452 [1] CLUTCH GP-ELECTRIC (AXLE OIL COOLER PUMP)  
7. 215-3013 [1] PUMP GP-GEAR (AXLE OIL COOLER)  
8. 243-5999 [1] PULLEY  
9. 243-6000 [1] PULLEY  
10. 260-9315 [1] BRACKET AS  
11. 261-0194 [1] ROD-ADJUSTING  
12. 261-0553 [1] PLATE AS  
13. 261-0554 [1] PLATE  
14. 261-0557 [1] SUPPORT AS  
15. 130-5300 [1] CLIP  
16. 5C-2890 M [2] NUT (M6X1-THD)  
17. 6V-3960 [1] BOLT (1/4-28X0.875-IN)  
18. 6V-8188 [1] NUT (1/2-13-THD)  
19. 7X-0331 [4] BOLT (1/2-13X4.25-IN)  
20. 7X-0338 [1] BOLT (1/2-13X6-IN)  
21. 7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
22. 7X-2534 M [2] BOLT (M6X1X50-MM)  
23. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
25. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
26. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
27. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4244 M [2] NUT (M12X1.75-THD)  
30. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8T-6868 M [1] BOLT (M12X1.75X80-MM)  
32. 8T-9377 [4] BOLT (3/8-16X2.25-IN)  
33. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
   
    ****STANDARD REMOVAL****
  4P-6518 AFJ [1] PULLEY-CRANKSHAFT  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  J   PART OF STANDARD PULLEY GP-CRANKSHAFT
  M   METRIC PART
 

Information:

Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Transmission Oil Cooler
990 Series II Wheel Loader and 844 Wheel Tractor Power Train
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Disassembly and Assembly
Transmission Oil Cooler - Remove - Engine in Chassis
990 Series II Wheel Loader and 844 Wheel Tractor Engine Supplement
Transmission Oil Cooler - Install - Engine in Chassis
990 Series II Wheel Loader and 844 Wheel Tractor Engine Supplement

Caterpillar Parts SIS Catalog 990 II :

COOLER & MTG GP-AXLE OIL
243-6010 COOLER & MTG GP-AXLE OIL
BLOCK GP-HYDRAULIC
229-5373 BLOCK GP-HYDRAULIC
BLOCK GP-HYDRAULIC
229-5373 BLOCK GP-HYDRAULIC
AXLE GP-OSCILLATING
152-2131 AXLE GP-OSCILLATING
AXLE GP-OSCILLATING
152-2131 AXLE GP-OSCILLATING
AXLE GP-OSCILLATING
8R-5467 AXLE GP-OSCILLATING
AXLE GP-OSCILLATING
8R-5467 AXLE GP-OSCILLATING
AXLE GP-FIXED
152-5271 AXLE GP-FIXED
DIFFERENTIAL & BEVEL GEAR GP
121-4658 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
121-4658 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
151-6431 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
151-6431 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
120-0550 DIFFERENTIAL GP
DIFFERENTIAL GP
151-6409 DIFFERENTIAL GP
FILTER GP-OIL
230-3633 FILTER GP-OIL
LINES GP-AXLE OIL COOLER
261-2125 LINES GP-AXLE OIL COOLER

Truck sale:

2005 CAT 990 II
USD $249,500 
2005 CAT 990 II

Kiewit Equipment
Portsmouth, Virginia
2000 CAT 990 II
Call 
2000 CAT 990 II

Chepstow Plant International LTD
Caldicot, England, United Kingdom
 
 
CAT 990 II

H & R Construction Parts & Equipment
Buffalo, New York
1999 CAT 990 II
Call 
1999 CAT 990 II

AS Roger Jensen Trading Co.Ltd.
 
 
CAT 990 II

TAC Parts (Formerly Parts & Equipment)
Uhrichsville, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.