AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

214-4862 SENSOR GP-POSITION -CONTROL LEVER S/N AXR1-UP; AXS1-UP PART OF 2Q-7897 VALVE GP-CONTROL 950G II


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
HYDRAULIC SYSTEM
VALVE GP-CONTROL
VALVE GP-PILOT

WHEEL LOADER 950G II WHEEL LOADER AXR
 2Q-7877 Valve Gp- Control (Kit-3rd Valve) Custom Product Support Literature for the 950G Series II and the 962G Series II Wheel Loaders AXR00001-UP (MACHINE) SEBC1352 950G II AXR   (2002)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-POSITION
214-4862 SENSOR GP-POSITION
 

#SEBC13520001
 

214-4862: SENSOR GP-POSITION

214-4862 SENSOR GP-POSITION -CONTROL LEVER
S/N AXR1-UP; AXS1-UP
PART OF 2Q-7897 VALVE GP-CONTROL
i01746041 SEBC1352
2144862 SENSOR GP-POSITION Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
 

#SEBC13520002
 

2Q-7877: VALVE GP-CONTROL

2Q-7877 VALVE GP-CONTROL -CUSTOM
S/N AXX1-UP; AXY1-UP
KIT-3RD VALVE
i01804734 SEBC1352
2Q7877 VALVE GP-CONTROL Parts scheme 2Q7877 VALVE GP-CONTROL Parts scheme 2Q7877 VALVE GP-CONTROL Parts scheme 2Q7877 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-2836 J [1] BRACKET  
2. 153-2837 J [1] BRACKET (LH)  
3. 213-3781 J [6] BLOCK  
4. 7V-2882 J [1] PLATE AS  
5. 8T-3851 JM [5] BOSS-WELD (M10X1.5X17.5-MM)  
6. 145-0298 LI [1] HOSE AS  
7. 145-0299 LI [1] HOSE AS  
8. 5P-7703 L [1] GROMMET  
9. 6V-8397 L [4] SEAL-O-RING  
10. 8M-2773 L [3] CLIP  
11. 8T-4121 L [1] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 LM [1] BOLT (M10X1.5X25-MM)  
13. 4M-2381 N [1] SPRING  
14. 6W-8349 N [1] KNOB  
15. 7I-5418 NI [1] HOSE AS  
16. 106-4436 N [1] ROD  
17. 114-3938 N [1] TAB  
18. 114-3949 N [1] LOCK AS  
19. 128-7063 N [2] CONNECTOR-ORIFICE (1.7-MM)  
20. 143-9069 N [2] ROD  
21. 152-9073 NI [1] HOSE AS  
22. 156-1816 N [1] COVER  
23. 3J-1907 N [2] SEAL-O-RING  
24. 6V-5683 NM [2] BOLT (M6X1X16-MM)  
25. 6V-8183 N [1] NUT-FULL (3/8-24-THD)  
26. 6V-8397 N [4] SEAL-O-RING  
27. 6V-8980 N [2] ELBOW (45-DEG)  
28. 6V-9168 N [2] NUT (11/16-16-THD)  
29. 8T-4244 NM [1] NUT (M12X1.75-THD)  
30. 8T-4896 N [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 248-6322 OI [2] HOSE AS  
32. 5H-4020 O [2] COVER  
33. 6V-0852 O [2] CAP-DUST  
34. 6V-3965 O [2] FITTING AS (QUICK DISCONNECT)  
35. 248-6320 O [1] TUBE AS  
36. 248-6321 O [1] TUBE AS  
37. 249-7592 OI [1] HOSE AS  
38. 8T-4195 OM [2] BOLT (M10X1.5X30-MM)  
39. 8T-2561 O [6] WASHER-HARD (10.5X28.5X5-MM THK)  
40. 8S-0024 O [8] CLIP (TAB)  
41. 240-8253 O [2] TUBE AS  
42. 1P-3704 O [2] SEAL-RECTANGULAR  
43. 1P-4579 O [2] FLANGE-HALF  
44. 3J-1907 O [2] SEAL-O-RING  
45. 4J-0522 O [7] SEAL-O-RING  
46. 4J-0524 O [1] SEAL-O-RING  
47. 197-3295 O [14] FLANGE-HALF  
48. 8T-4121 O [2] WASHER-HARD (11X21X2.5-MM THK)  
49. 8S-0023 O [8] CLIP (SLOT)  
50. 8T-4139 OM [6] BOLT (M12X1.75X30-MM)  
51. 8T-4183 OM [32] BOLT (M12X1.75X40-MM)  
52. 7X-3392 O [24] WASHER-HARD (13.5X22.5X3-MM THK)  
53. 8T-4223 O [22] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-4910 OM [8] BOLT (M12X1.75X60-MM)  
55. 120-7611 P [1] VALVE GP-CONTROL (AUXILIARY)  
57. 3J-1907 P [2] SEAL-O-RING  
58. 6V-8724 P [1] ELBOW  
59. 8T-1905 P [1] ELBOW  
60. 6V-3683 Q [1] SEAL-O-RING  
61. 5P-6718 Q [1] SEAL-O-RING  
62. 6E-0738 Q [3] ROD  
63. 153-0056 QY [1] VALVE GP-PILOT (AUXILIARY)(AUXILIARY)  
    *****STANDARD REMOVAL*****
  130-8218 AFS [1] PLATE  
  130-8219 AFS [1] PLATE  
  8T-4121 AFT [4] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4136 AFTM [4] BOLT (M10X1.5X25-MM)  
  148-7188 AFT [2] BRACKET  
  1P-4579 AFU [2] FLANGE-HALF  
  4J-0522 AFU [1] SEAL-O-RING  
  4J-0524 AFU [1] SEAL-O-RING  
  8T-4183 AFUM [8] BOLT (M12X1.75X40-MM)  
  8T-4223 AFU [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  134-8203 AFTI [1] HOSE AS  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF STANDARD ARM & BEARING AS
  L   PART OF STANDARD LINES GP-PILOT (3-FUNCTION)
  M   METRIC PART
  N   PART OF STANDARD CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)
  O   PART OF STANDARD LINES GP-FRONT
  P   PART OF STANDARD VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)
  Q   PART OF STANDARD VALVE GP-PILOT (3-FUNCTION)
  S   CUT LARGER NOTCHES IN LOADER FRAME GUARD PLATE
  T   PART OF STANDARD LINES GP-TILT CYLINDER
  U   PART OF STANDARD LINES GP-HYDRAULIC
  Y   SEPARATE ILLUSTRATION
 

#SEBC13520003
 

2Q-7897: VALVE GP-CONTROL

2Q-7897 VALVE GP-CONTROL -CUSTOM
S/N AXR1-UP; AXS1-UP
KIT-3RD VALVE
i01801165 SEBC1352
2Q7897 VALVE GP-CONTROL Parts scheme 2Q7897 VALVE GP-CONTROL Parts scheme 2Q7897 VALVE GP-CONTROL Parts scheme 2Q7897 VALVE GP-CONTROL Parts scheme 2Q7897 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-2836 J [1] BRACKET  
2. 153-2837 J [1] BRACKET (LH)  
3. 213-3781 J [6] BLOCK  
4. 7V-2882 J [1] PLATE AS  
5. 8T-3851 JM [5] BOSS-WELD (M10X1.5X17.5-MM)  
6. 3S-2093 L [6] STRAP-CABLE  
7. 6T-5600 L [4] BOSS  
8. 8L-8413 L [1] STRAP-CABLE  
9. 8T-0328 L [2] WASHER-HARD (5.5X10X1-MM THK)  
10. 9T-4735 L [1] SPRING  
11. 105-2976 L [3] FLANGE  
12. 114-8165 L [2] ROD  
13. 139-1378 L [2] BEARING  
14. 149-3949 L [1] LEVER-CONTROL  
15. 150-6287 L [2] SPACER  
16. 163-8119 L [1] SPRING  
17. 201-5563 L [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
18. 208-2479 L [2] SPACER (10X13.1X5.5-MM THK)  
19. 208-8333 L [1] COVER  
20. 238-2771 L [1] COVER  
21. 210-6782 L [1] COVER  
22. 238-2772 L [1] PLATE AS  
  6T-5600 [4] BOSS  
  105-2797 [1] BOSS  
  6V-9632 LM [2] NUT-WELD (M6X1-THD)  
23. 211-7710 L [1] COVER AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
24. 211-8285 L [1] PLATE  
25. 214-4862 LY [1] SENSOR GP-POSITION (CONTROL LEVER)  
26. 102-8805 L [1] KIT-RECEPTACLE (6-PIN)  
27. 5F-9757 L [2] GROMMET  
28. 7X-2533 LM [3] BOLT (M6X1X35-MM)  
29. 7X-2619 LM [1] BOLT (M6X1X20-MM)  
30. 8C-8451 LM [1] BOLT (M6X1X40-MM)  
31. 248-6322 NI [2] HOSE AS  
32. 5H-4020 N [2] COVER  
33. 6V-0852 N [2] CAP-DUST  
34. 6V-3965 N [2] FITTING AS (QUICK DISCONNECT)  
35. 248-6320 N [1] TUBE AS  
36. 248-6321 N [1] TUBE AS  
37. 249-7592 NI [1] HOSE AS  
38. 8T-4195 NM [2] BOLT (M10X1.5X30-MM)  
39. 8T-2561 N [6] WASHER-HARD (10.5X28.5X5-MM THK)  
40. 8S-0024 N [8] CLIP (TAB)  
41. 240-8253 N [2] TUBE AS  
42. 1P-3704 N [2] SEAL-RECTANGULAR  
43. 1P-4579 N [2] FLANGE-HALF  
44. 3J-1907 N [2] SEAL-O-RING  
45. 4J-0522 N [7] SEAL-O-RING  
46. 4J-0524 N [1] SEAL-O-RING  
47. 197-3295 N [14] FLANGE-HALF  
48. 8T-4121 N [2] WASHER-HARD (11X21X2.5-MM THK)  
49. 8S-0023 N [8] CLIP (SLOT)  
50. 8T-4139 NM [6] BOLT (M12X1.75X30-MM)  
51. 8T-4183 NM [32] BOLT (M12X1.75X40-MM)  
52. 7X-3392 N [24] WASHER-HARD (13.5X22.5X3-MM THK)  
53. 8T-4223 N [22] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-4910 NM [8] BOLT (M12X1.75X60-MM)  
55. 6V-0852 O [2] CAP-DUST  
56. 6V-3965 O [2] FITTING AS (QUICK DISCONNECT)  
57. 126-6872 O [2] TEE  
58. 133-1135 O [1] TUBE AS  
59. 148-9116 O [1] TUBE AS  
60. 3J-1907 O [6] SEAL-O-RING  
61. 6V-8397 O [4] SEAL-O-RING  
62. 6V-8636 O [2] CONNECTOR  
63. 189-8261 OY [1] VALVE GP-PILOT (OIL MANIFOLD, 3-FUNCTION)  
64. 120-7611 O [1] VALVE GP-CONTROL  
    *****STANDARD REMOVAL*****
  130-8218 AFP [1] PLATE  
  130-8219 AFP [1] PLATE  
  8T-4121 AFQ [4] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4136 AFQM [4] BOLT (M10X1.5X25-MM)  
  148-7188 AFQ [2] BRACKET  
  1P-4579 AFS [2] FLANGE-HALF  
  4J-0522 AFS [1] SEAL-O-RING  
  4J-0524 AFS [1] SEAL-O-RING  
  8T-4183 AFSM [8] BOLT (M12X1.75X40-MM)  
  8T-4223 AFS [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  134-8203 AFSI [1] HOSE AS  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF STANDARD ARM & BEARING AS
  L   PART OF STANDARD CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)
  M   METRIC PART
  N   PART OF STANDARD LINES GP-FRONT
  O   PART OF STANDARD VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)
  P   CUT LARGER NOTCHES IN LOADER FRAME GUARD PLATE
  Q   PART OF STANDARD LINES GP-TILT
  S   PART OF STANDARD LINES GP-HYDRAULIC
  Y   SEPARATE ILLUSTRATION
 

#SEBC13520004
 

153-0056: VALVE GP-PILOT

153-0056 VALVE GP-PILOT -AUXILIARY
S/N AXX1-UP; AXY1-UP
PART OF 2Q-7877 VALVE GP-CONTROL
i00861526 SEBC1352
1530056 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3828 Y [2] VALVE GP-PILOT CARTRIDGE  
2. 107-3838 Y [2] VALVE GP-PILOT CARTRIDGE  
3. 147-3062 [1] GASKET-LOWER  
4. 6E-3412 [1] BOLT-PIVOT  
5. 104-4273 [1] CLAMP  
6. 107-4029 [1] BRACKET-PIVOT  
7. 104-4272 [1] BOOT  
8. 107-4030 [1] NUT (M12-THD)  
9. 107-4043 [1] PLATE  
10. 5B-2183 [1] NUT-JAM (9/16-18-THD)  
11. 107-4092 [2] SLEEVE  
12. 107-4061 [2] PLUNGER AS  
13. 107-4990 [2] CLAPPER  
14. 122-8874 [2] SPRING  
15. 107-5012 [1] SCREW-HEX SOCKET  
16. 6E-0755 [1] PIN-PIVOT  
17. 7S-9930 [1] RING-RETAINING  
18. 107-5011 [2] SCREW-HEX SOCKET  
19. 135-6145 [1] GASKET  
20. 147-3064 [1] BODY-MAGNET  
21. 147-3063 [2] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#SEBC13520005
 

189-8261: VALVE GP-PILOT

189-8261 VALVE GP-PILOT -CUSTOM
S/N AXR1-UP; AXS1-UP
PART OF 2Q-7897 VALVE GP-CONTROL
i01741351 SEBC1352
1898261 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-8133 [1] GASKET  
2. 137-8135 [2] COVER  
3. 8T-4133 M [3] NUT (M10X1.5-THD)  
4. 174-4913 J [2] VALVE GP-SOLENOID (24-VOLT)(PILOT PROPORTIONING)  
    (EACH INCLUDES)
  145-1144 [1] COIL AS  
  164-2108 [1] WASHER (13.03X25.4X2.38-MM THK)  
  167-9524 [1] NUT-SELF-LOCKING (1/2-28-THD)  
5. 135-2174 [1] BODY-VALVE  
6. 8T-5005 LM [3] BOLT (M10X1.5X70-MM)  
7. 7X-7729 [6] WASHER (11X25X3-MM THK)  
8. 4M-8303 [6] SEAL-O-RING  
9. 8T-6685 NM [3] BOLT (M10X1.5X110-MM)  
   
    AVAILABLE REPAIR KIT(S):
  108-2148 J [1] KIT-SEAL (SOLENOID VALVE)  
  J   GROUP MARKED J INCLUDES KIT MARKED J
  L   USED IN THIRD VALVE APPLICATIONS ONLY
  M   METRIC PART
  N   USED IN FOURTH VALVE APPLICATIONS ONLY
 

#SEBC13520006
 

107-3828: VALVE GP-PILOT CARTRIDGE

107-3828 VALVE GP-PILOT CARTRIDGE
S/N AXX1-UP; AXY1-UP
PART OF 153-0056 VALVE GP-PILOT
i00165882 SEBC1352
1073828 VALVE GP-PILOT CARTRIDGE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6028 [1] SEAL-O-RING (16.36MM ID)  
2. 6V-5758 [1] SEAL-O-RING (12.42MM ID)  
3. 6E-0770 [1] RING-BACKUP  
4. 6E-3767 [1] SPRING  
5. 107-3827 [1] SEAT-SPRING  
6. 6E-3769 [1] PIN  
   
    AVAILABLE REPAIR KIT(S):
  1G-5927 [1] KIT-METERING CAP SEAL (PILOT CARTRIDGE VALVE)  
    (INCLUDES SEAL-O-RINGS & RING-BACKUP)
 

#SEBC13520007
 

107-3838: VALVE GP-PILOT CARTRIDGE

107-3838 VALVE GP-PILOT CARTRIDGE
S/N AXX1-UP; AXY1-UP
PART OF 153-0056 VALVE GP-PILOT
i00168243 SEBC1352
1073838 VALVE GP-PILOT CARTRIDGE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3837 [1] PLUNGER  
2. 5P-8356 [1] SEAL-O-RING (21.89MM ID)  
3. 6E-0763 [1] RETAINER  
4. 6E-0766 [2] RING-RETAINING  
5. 107-3846 [1] SEAT-SPRING  
6. 6E-0765 [1] SPRING  
7. 6E-0764 [1] SEAT-SPRING  
8. 6E-3414 [1] SEAL-U-CUP WIPER  
9. 6E-0768 [1] CAP  
   
    AVAILABLE REPAIR KIT(S):
  1G-5928 [1] KIT-PLUNGER SEAL (PILOT CARTRIDGE VALVE)  
    (INCLUDES SEAL-O-RING & SEAL-SPOOL)
 

Information:

Special Instruction
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Technical Information Bulletin
Transmission and Torque Converter Temperature Sensor Replacement
Transmission and Torque Converter Temperature Sensor Replacement
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Engine Oil Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed Sensor (Torque Converter Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor (Transmission Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor (Torque Converter Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor
3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Position Sensor (Left Brake Pedal)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Position Sensor (Throttle)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Temperature Sensor (Transmission Lubrication Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Temperature Sensor (Torque Converter Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Temperature Sensor (Transmission Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor
3126B Engine for Caterpillar Built Machines
Temperature Sensor (Hydraulic Oil)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Systems Operation
Sensors
Caterpillar Monitoring System
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Position Sensor (Left Brake Pedal)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Sensors
Payload Control System (PCS) 2.X
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Testing and Adjusting
Speed Sensor - Adjust
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Calibration
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor (Left Brake Pedal) (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Calibration and Programming
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Position Sensor for the Joystick Control (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0110 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0100 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0110 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04
Caterpillar Monitoring System
Sensor Dynamic Operation
Caterpillar Monitoring System
Pulse Width Modulated Sensor
Caterpillar Monitoring System
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0830 - FMI 08
Caterpillar Monitoring System
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensor Signal Voltage
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 08
Caterpillar Monitoring System
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Speed/Timing Sensor - Calibrate
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0351 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0364 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0364 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0041 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0041 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 13
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 082 - CID 0353 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Analog Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure Sensor - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0826 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 04
Caterpillar Monitoring System
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 081 - CID 0177 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0177 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0190 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0585 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0672 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0673 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 00
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 01
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 030 - CID 1791 - FMI 08
Caterpillar Monitoring System
MID 082 - CID 0352 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 074 - CID 0364 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 1964 - FMI 13
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 030 - CID 0427 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 04
Caterpillar Monitoring System
Disassembly and Assembly
Lift Kickout Control - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
New Rotary Position Sensors Are Used {1400}
2002/07/01
Explanation of Transmission Oil Temperature Sensors {5574}
2003/03/10
New Hydraulic Oil Temperature Sensor Is Now Used {509T}
2003/08/11
A New Speed Sensor is Available {1907}
2004/03/08
Correction to Troubleshooting Manual, "Sensor Signal Voltage" {5574}
2004/09/20
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2007/03/19
New Engine Software Is Now Available {1901, 1920, 1929, 7620}
2006/05/22
A New Pressure Sensor Is Available for the Payload Control System {1439, 7494}
2007/06/04
An Improved Tilt Sensor Linkage and Guard Is Available for Medium Wheel Loaders {5736}
2009/08/17
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Improved Rotary Position Sensor Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1439, 1913, 4806, 4809, 5736, 5737}
2012/07/11

Caterpillar Parts SIS Catalog 950G II :

VALVE GP-CONTROL
2Q-7877 VALVE GP-CONTROL
VALVE GP-CONTROL
2Q-7897 VALVE GP-CONTROL
VALVE GP-PILOT
153-0056 VALVE GP-PILOT
VALVE GP-PILOT
189-8261 VALVE GP-PILOT
VALVE GP-PILOT CARTRIDGE
107-3828 VALVE GP-PILOT CARTRIDGE
VALVE GP-PILOT CARTRIDGE
107-3838 VALVE GP-PILOT CARTRIDGE

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.