AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-8775 CONVERSION GP-CONTROL VALVE S/N BXY1-UP CUSTOM CANNOT BE USED WITH 298-6963 LIFT AR, 298-6965 LIFT AR 988H


HYDRAULIC SYSTEM
CONVERSION GP
LINES GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
HYDRAULIC SYSTEM
CYLINDER GP

WHEEL LOADER 988H WHEEL LOADER BXY
 CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 988H WHEEL LOADER BXY00001-UP (MACHINE) SEBC1454 988H BXY   (2004)

HYDRAULIC SYSTEM

CONVERSION GP
CONVERSION AR-RIDE CONTROL
2Q-8762 CONVERSION AR-RIDE CONTROL
CONVERSION GP-CONTROL VALVE
2Q-8587 CONVERSION GP-CONTROL VALVE
CONVERSION GP-CONTROL VALVE
2Q-8587 CONVERSION GP-CONTROL VALVE
CONVERSION GP-CONTROL VALVE
2Q-8775 CONVERSION GP-CONTROL VALVE
 

#SEBC14540320
 

2Q-8775: CONVERSION GP-CONTROL VALVE

2Q-8775 CONVERSION GP-CONTROL VALVE
S/N BXY1-UP
CUSTOM
CANNOT BE USED WITH 298-6963 LIFT AR, 298-6965 LIFT AR
i05291542 SEBC1454
2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme 2Q8775 CONVERSION GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6739 H [2] BLOCK  
2. 103-5350 H [4] PLATE  
3. 307-4671 JY [1] CONTROL GP-HANDLE (PILOT CONTROL)  
4. 262-5237 J [1] COVER  
5. 201-5563 J [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
6. 9X-2044 JM [21] SCREW-TRUSS HEAD (M6X1X16-MM)  
7. 349-2531 J [1] SWITCH AS-ROCKER (24-VOLT)(UNLOCK)  
8. 7X-2556 NM [8] BOLT (M16X2X100-MM)  
9. 8T-4194 NM [16] BOLT (M12X1.75X50-MM)  
10. 7X-2553 NM [16] BOLT (M16X2X40-MM)  
11. 8T-4140 NM [14] BOLT (M16X2X60-MM)  
12. 8T-4779 NM [12] BOLT (M16X2X35-MM)  
13. 188-7007 [1] BRACKET AS  
14. 315-8759 N [1] BRACKET AS  
15. 174-2435 N [1] BRACKET AS  
16. 200-5254 N [1] BRACKET AS  
17. 217-0643 N [2] BRACKET AS  
18. 7I-8640 N [12] CLAMP-HALF  
19. 103-1303 N [6] CLAMP-HALF  
20. 1P-5767 N [8] FLANGE-HALF  
21. 5P-8077 N [4] FLANGE-HALF  
22. 174-0833 NI [1] HOSE AS  
23. 212-6862 NI [1] HOSE AS  
24. 117-8704 N [1] PLATE  
25. 1P-3704 N [2] SEAL-RECTANGULAR  
26. 1P-3705 N [2] SEAL-RECTANGULAR  
27. 1P-3706 N [3] SEAL-RECTANGULAR  
28. 217-0641 N [1] TUBE AS  
29. 217-0642 N [1] TUBE AS  
30. 298-2498 N [1] TUBE AS  
31. 315-8761 N [1] TUBE AS  
32. 321-5981 N [1] TUBE AS  
33. 9X-8257 N [50] WASHER (17.5X30X3.5-MM THK)  
34. 8T-4223 N [16] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 8T-6385 PM [8] BOLT (M16X2X180-MM)  
36. 156-5781 P [2] MANIFOLD  
37. 1P-3706 P [5] SEAL-RECTANGULAR  
38. 315-8752 P [1] TUBE AS  
39. 315-8791 P [1] TUBE AS  
40. 9X-8257 S [28] WASHER (17.5X30X3.5-MM THK)  
41. 148-8378 S [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 S [1] SEAL-O-RING  
  6V-8397 S [1] SEAL-O-RING  
  6V-8724 S [1] ELBOW  
42. 7X-2557 SM [4] BOLT (M16X2X140-MM)  
43. 8T-4139 SM [18] BOLT (M12X1.75X30-MM)  
44. 1P-3706 S [2] SEAL-RECTANGULAR  
45. 308-4925 S [1] SPACER  
46. 315-9425 S [1] TUBE AS  
47. 8T-4122 S [8] WASHER-HARD (17X32X3.5-MM THK)  
48. 8T-4223 S [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 155-2268 SY [1] VALVE GP-CONTROL (AUXILIARY)  
50. 246-2305 T [1] TUBE AS  
51. 246-2321 T [1] TUBE AS  
52. 188-7009 U [1] TUBE AS  
53. 188-7010 U [1] TUBE AS  
  H   FROM BOOM AS
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   FROM CONTROL GP-ELECTROHYDRAULIC
  M   METRIC PART
  N   PART OF STANDARD LINES GP-FRONT
  P   PART OF LINES GP-TILT CYLINDER
  S   PART OF VALVE & MTG-MAIN CONTROL
  T   PART OF LINES GP-FRONT 3.88-M LIFT
  U   PART OF LINES GP-FRONT
  Y   SEPARATE ILLUSTRATION
 

#SEBC14540321
 

222-3757: CONVERSION GP-HYDRAULIC LINES

222-3757 CONVERSION GP-HYDRAULIC LINES
S/N BXY1-UP
STEEL MILL, PROTECTION
PART OF 2Q-8650 STEEL MILL AR
i02404013 SEBC1454
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  189-7253 Y [1] LINES GP-AXLE OIL COOLER  
  219-5021 Y [1] LINES GP-FRONT  
  189-7250 Y [1] LINES GP-HYDRAULIC  
  219-5022 Y [1] LINES GP-HYDRAULIC (MAIN CONTROL VALVE)  
  219-5044 Y [1] LINES GP-LIFT CYLINDER  
  189-7255 Y [1] LINES GP-POWER TRAIN OIL  
  189-7252 Y [1] LINES GP-SERVICE BRAKE  
  222-3756 Y [1] LINES GP-SERVICE BRAKE  
  189-7251 Y [1] LINES GP-STEERING  
  219-5023 Y [1] LINES GP-STEERING NEUTRALIZER  
  189-7254 Y [1] LINES GP-TILT CYLINDER  
  264-9865 Y [1] WIRING GP-SENSOR (LIFT, TILT POSITION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC14540322
 

227-3317: CONVERSION GP-HYDRAULIC LINES

227-3317 CONVERSION GP-HYDRAULIC LINES
S/N BXY1-UP
CUSTOM
PART OF 2Q-8633 STEEL MILL AR
i02887174 SEBC1454
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  304-8946 Y [1] LINES GP-TILT CYLINDER (WITH HEAT INSULATION)  
  189-7253 JY [1] LINES GP-AXLE OIL COOLER  
  189-7250 Y [1] LINES GP-HYDRAULIC  
  189-7259 LY [1] LINES GP-HYDRAULIC (MAIN CONTROL VALVE)  
  189-7257 Y [1] LINES GP-LIFT CYLINDER  
  189-7255 Y [1] LINES GP-POWER TRAIN OIL  
  189-7252 Y [1] LINES GP-SERVICE BRAKE  
  222-3756 Y [1] LINES GP-SERVICE BRAKE  
  189-7251 Y [1] LINES GP-STEERING  
    S/N BXY1-1899
  310-3495 Y [1] LINES GP-STEERING  
    S/N BXY1900-UP
  219-5023 Y [1] LINES GP-STEERING NEUTRALIZER  
  189-7254 Y [1] LINES GP-TILT CYLINDER  
  J   FOR USE WITH COOLER AR-AXLE OIL
  L   FOR USE WITH HYDRAULIC AR-2 VALVE
  Y   SEPARATE ILLUSTRATION
 

#SEBC14540323
 

287-3680: CONVERSION GP-HYDRAULIC LINES

287-3680 CONVERSION GP-HYDRAULIC LINES
S/N BXY1-UP
PART OF 2Q-8650, 2Q-8730 STEEL MILL AR
i03875600 SEBC1454
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  304-8946 Y [1] LINES GP-TILT CYLINDER (WITH HEAT INSULATION)  
    -OR-
  286-7267 Y [1] LINES GP-TILT CYLINDER (WITH HEAT INSULATION)  
  189-7253 Y [1] LINES GP-AXLE OIL COOLER  
  219-5021 Y [1] LINES GP-FRONT  
  189-7250 Y [1] LINES GP-HYDRAULIC  
  219-5022 Y [1] LINES GP-HYDRAULIC (MAIN CONTROL VALVE)  
  219-5044 Y [1] LINES GP-LIFT CYLINDER  
  189-7255 Y [1] LINES GP-POWER TRAIN OIL  
  189-7252 Y [1] LINES GP-SERVICE BRAKE  
  222-3756 Y [1] LINES GP-SERVICE BRAKE (STEEL MILL, PROTECTION)  
    -OR-
  329-4612 Y [1] LINES GP-SERVICE BRAKE (STEEL MILL, PROTECTION)  
  189-7251 Y [1] LINES GP-STEERING  
    -OR-
  310-3495 Y [1] LINES GP-STEERING  
  219-5023 Y [1] LINES GP-STEERING NEUTRALIZER  
  189-7254 Y [1] LINES GP-TILT CYLINDER  
  264-9865 Y [1] WIRING GP-SENSOR (LIFT, TILT POSITION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC14540324
 

329-9286: CONVERSION GP-HYDRAULIC LINES

329-9286 CONVERSION GP-HYDRAULIC LINES -STEEL MILL, PROTECTION
S/N BXY1-UP
CUSTOM
PART OF 2Q-8751 STEEL MILL AR
i03782429 SEBC1454
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  329-8110 Y [1] LINES GP-PROTECTION  
  189-7253 Y [1] LINES GP-AXLE OIL COOLER  
  219-5021 Y [1] LINES GP-FRONT  
  189-7250 Y [1] LINES GP-HYDRAULIC  
  219-5044 Y [1] LINES GP-LIFT CYLINDER  
  326-0635 Y [1] LINES GP-PILOT (STEEL MILL, PROTECTION)  
  189-7255 Y [1] LINES GP-POWER TRAIN OIL  
  189-7252 Y [1] LINES GP-SERVICE BRAKE  
  329-4612 Y [1] LINES GP-SERVICE BRAKE (STEEL MILL, PROTECTION)  
  310-3495 Y [1] LINES GP-STEERING  
  219-5023 Y [1] LINES GP-STEERING NEUTRALIZER  
  326-0636 Y [1] LINES GP-TILT CYLINDER (STEEL MILL, PROTECTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC14540325
 

230-7914: CYLINDER & SENSOR GP-LIFT

230-7914 CYLINDER & SENSOR GP-LIFT -RH
S/N BXY1-UP
220-MM BORE X 911-MM STROKE
PART OF 261-1516 CYLINDER GP-LIFT & TILT
Type 1
i01951880 SEBC1454
2307914 CYLINDER & SENSOR GP-LIFT Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 173-8614 [1] HEAD  
5. 212-0907 [1] PLATE-CONNECTOR  
6. 214-1639 [1] MAGNET  
7. 217-5073 [1] CYLINDER AS-LIFT  
  [1] CAP AS  
  095-0879 [1] PIN-SPRING  
  152-3750 [1] BEARING  
8. 217-8763 [1] COVER-PROTECTION  
9. 230-0877 [1] PISTON  
10. 230-9985 [1] ROD AS  
  152-3750 [1] BEARING  
11. 243-3177 [1] RETAINER  
12. 217-6567 [1] SENSOR GP-POSITION (LIFT)  
  9X-1386 E SLEEVE (23-CM)  
  102-2244 [1] GROMMET  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  215-1942 [1] RING-BACKUP  
  217-4521 [1] SEAL-O-RING  
13. 108-0122 [1] RING-BACKUP  
14. 167-2222 [1] SEAL AS-BUFFER  
15. 167-2339 [1] SEAL-U-CUP  
16. 188-2199 [1] SEAL-O-RING  
17. 215-1942 [1] RING-BACKUP  
18. 219-1438 [1] SEAL AS  
19. 225-3290 [1] SEAL-WIPER  
20. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
21. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
22. 6E-0496 [1] RING-WEAR  
23. 6V-8237 [11] WASHER (26X44X4-MM THK)  
24. 8T-0668 M [11] BOLT (M24X3X110-MM)  
25. 8T-3331 [1] RING-WEAR  
26. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
27. 9M-5894 [1] SEAL-O-RING  
28. 9X-6017 [1] LOCKNUT (3 3/4-12-THD)  
29. 9X-1386 E SLEEVE (9-CM)  
29A. 9X-1386 E SLEEVE (14-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC14540326
 

230-7914: CYLINDER & SENSOR GP-LIFT

230-7914 CYLINDER & SENSOR GP-LIFT -RH
S/N BXY1-UP
220-MM BORE X 911-MM STROKE
PART OF 261-1516 CYLINDER GP-LIFT & TILT
Type 2
i03643868 SEBC1454
2307914 CYLINDER & SENSOR GP-LIFT Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 173-8614 [1] HEAD  
5. 212-0907 C [1] PLATE-CONNECTOR  
6. 214-1639 [1] MAGNET  
7. 509-9466 [1] CYLINDER AS  
  [1] CAP AS  
7A. 152-3750 [1] BEARING  
  095-0879 [1] PIN-SPRING  
8. 217-8763 [1] COVER-PROTECTION  
9. 230-0877 [1] PISTON  
10. 509-9467 [1] ROD AS  
10A. 152-3750 [1] BEARING  
11. 243-3177 [1] RETAINER  
12. 342-5986 C [1] SENSOR GP-POSITION (LIFT)  
  9X-1386 E SLEEVE (23-CM)  
  102-2244 [1] GROMMET  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  215-1942 [1] RING-BACKUP  
  217-4521 [1] SEAL-O-RING  
13. 108-0122 [1] RING-BACKUP  
14. 346-9381 [1] SEAL AS-BUFFER  
15. 167-2339 [1] SEAL-U-CUP  
16. 188-2199 [1] SEAL-O-RING  
17. 215-1942 [1] RING-BACKUP  
18. 219-1438 [1] SEAL AS  
19. 346-9383 [1] SEAL-WIPER  
20. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
21. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
22. 6E-0496 [1] RING-WEAR  
23. 6V-8237 [11] WASHER (26X44X4-MM THK)  
24. 8T-0668 M [11] BOLT (M24X3X110-MM)  
25. 8T-3331 [1] RING-WEAR  
26. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
27. 9M-5894 [1] SEAL-O-RING  
28. 9X-6017 [1] LOCKNUT (3 3/4-12-THD)  
29. 9X-1386 E SLEEVE (9-CM)  
29A. 9X-1386 E SLEEVE (14-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC14540327
 

230-7913: CYLINDER & SENSOR GP-TILT

230-7913 CYLINDER & SENSOR GP-TILT
S/N BXY1-UP
220-MM (8.66-IN) BORE X 1770-MM (69.69-IN) STROKE. CUSTOM
PART OF 261-1516 CYLINDER GP-LIFT & TILT
Type 1
i01951878 SEBC1454
2307913 CYLINDER & SENSOR GP-TILT Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2244 [1] GROMMET  
2. 212-0907 [1] PLATE-CONNECTOR  
3. 214-1639 [1] MAGNET  
4. 188-2199 J [1] SEAL-O-RING  
5. 217-6566 [1] SENSOR GP-POSITION (TILT)  
  144-1636 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
6. 217-8763 [1] COVER-PROTECTION  
7. 243-3177 [1] RETAINER  
8. 218-9733 [1] CYLINDER AS-TILT  
  095-0879 [1] PIN-SPRING  
8A. 152-3739 [2] BUSHING  
9. 230-0877 [1] PISTON  
10. 230-0915 [1] ROD AS  
10A. 152-3739 [2] BUSHING  
11. 231-1960 [1] HEAD  
12. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 108-0122 J [1] RING-BACKUP  
14. 167-2220 J [1] SEAL AS-BUFFER  
15. 167-2336 J [1] SEAL-U-CUP  
16. 215-1942 J [1] RING-BACKUP  
17. 219-1438 J [1] SEAL AS  
18. 225-3289 J [1] SEAL-WIPER  
19. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
20. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
21. 6E-0496 J [1] RING-WEAR  
22. 6V-8237 [12] WASHER (26X44X4-MM THK)  
23. 8T-0666 M [10] BOLT (M24X3X90-MM)  
24. 8T-0669 M [2] BOLT (M24X3X130-MM)  
25. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
26. 8T-8737 [1] PLUG-SEAL  
27. 9M-5894 J [1] SEAL-O-RING  
28. 9X-3579 J [1] RING-WEAR  
29. 9X-6017 [1] LOCKNUT (3 3/4-12-THD)  
30. 9X-1386 E SLEEVE (14-CM)  
30A. 9X-1386 E SLEEVE (9-CM)  
   
    AVAILABLE REPAIR KIT(S):
  363-4158 J [1] KIT-HYD CYLINDER SEAL (TILT)  
    (FOR USE WITH REHS1392 FOUND IN SIS WEB)
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBC14540328
 

230-7913: CYLINDER & SENSOR GP-TILT

230-7913 CYLINDER & SENSOR GP-TILT
S/N BXY1-UP
220-MM (8.66-IN) BORE X 1770-MM (69.69-IN) STROKE. CUSTOM
PART OF 261-1516 CYLINDER GP-LIFT & TILT
Type 2
i03618607 SEBC1454
2307913 CYLINDER & SENSOR GP-TILT Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2244 [1] GROMMET  
2. 212-0907 [1] PLATE-CONNECTOR  
3. 214-1639 [1] MAGNET  
4. 188-2199 J [1] SEAL-O-RING  
5. 342-5985 C [1] SENSOR GP-POSITION (TILT)  
  144-1636 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
6. 217-8763 [1] COVER-PROTECTION  
7. 243-3177 [1] RETAINER  
8. 218-9733 [1] CYLINDER AS-TILT  
  095-0879 [1] PIN-SPRING  
8A. 152-3739 [2] BUSHING  
9. 230-0877 [1] PISTON  
10. 491-8251 [1] ROD AS  
10A. 152-3739 [2] BUSHING  
11. 231-1960 [1] HEAD  
12. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 108-0122 J [1] RING-BACKUP  
14. 335-8964 J [1] SEAL AS-BUFFER  
15. 341-3191 J [1] SEAL-U-CUP  
16. 215-1942 J [1] RING-BACKUP  
17. 219-1438 J [1] SEAL AS  
18. 335-8966 J [1] SEAL-WIPER  
19. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
20. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
21. 6E-0496 J [1] RING-WEAR  
22. 6V-8237 [12] WASHER (26X44X4-MM THK)  
23. 8T-0666 M [10] BOLT (M24X3X90-MM)  
24. 8T-0669 M [2] BOLT (M24X3X130-MM)  
25. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
26. 8T-8737 [1] PLUG-SEAL  
27. 9M-5894 J [1] SEAL-O-RING  
28. 9X-3579 J [1] RING-WEAR  
29. 9X-6017 [1] LOCKNUT (3 3/4-12-THD)  
30. 9X-1386 E SLEEVE (14-CM)  
30A. 9X-1386 E SLEEVE (9-CM)  
   
    AVAILABLE REPAIR KIT(S):
  363-4158 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBC14540329
 

168-6942: CYLINDER GP-LIFT

168-6942 CYLINDER GP-LIFT -LOGGING, RH
S/N BXY1-UP
235-MM BORE X 907-MM STROKE
PART OF 174-4682 LINES GP-LIFT CYLINDER
i01183949 SEBC1454
1686942 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-2477 [1] CYLINDER AS (RH)  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 1J-5281 [1] RING-WEAR  
4. 4T-4143 [1] SEAL AS  
5. 170-2482 [1] PISTON  
6. 1U-3174 [1] SEAL-O-RING  
7. 158-3032 [1] RING-BACKUP  
8. 8T-8383 [1] SEAL-HEAD  
9. 303-2002 [1] HEAD  
10. 135-7816 [1] ROD AS  
11. 225-3290 [1] SEAL-WIPER  
12. 167-2339 [1] SEAL-U-CUP  
13. 167-2222 [1] SEAL AS-BUFFER  
14. 8T-3331 [1] RING-WEAR  
15. 8T-0668 M [11] BOLT (M24X3X110-MM)  
16. 6V-8237 [11] WASHER (26X44X4-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog 988H :

CONVERSION GP-CONTROL VALVE
2Q-8587 CONVERSION GP-CONTROL VALVE
CONVERSION GP-CONTROL VALVE
2Q-8587 CONVERSION GP-CONTROL VALVE
CONVERSION AR-RIDE CONTROL
2Q-8762 CONVERSION AR-RIDE CONTROL
CONTROL & LINES GP-RIDE
2Q-8648 CONTROL & LINES GP-RIDE
ACTUATOR GP-PILOT CONTROL
217-6720 ACTUATOR GP-PILOT CONTROL
ACTUATOR GP-PILOT CONTROL
217-6719 ACTUATOR GP-PILOT CONTROL
ACTUATOR GP-PILOT CONTROL
217-6719 ACTUATOR GP-PILOT CONTROL
ACCUMULATOR GP-RIDE CONTROL
348-9283 ACCUMULATOR GP-RIDE CONTROL
222-3757 CONVERSION GP-HYDRAULIC LINES
227-3317 CONVERSION GP-HYDRAULIC LINES
287-3680 CONVERSION GP-HYDRAULIC LINES
329-9286 CONVERSION GP-HYDRAULIC LINES
CYLINDER & SENSOR GP-LIFT
230-7914 CYLINDER & SENSOR GP-LIFT
CYLINDER & SENSOR GP-LIFT
230-7914 CYLINDER & SENSOR GP-LIFT
CYLINDER & SENSOR GP-TILT
230-7913 CYLINDER & SENSOR GP-TILT
CYLINDER & SENSOR GP-TILT
230-7913 CYLINDER & SENSOR GP-TILT

Truck sale:

 
 
Caterpillar 988H
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 988H, Wheel Loaders, Construction
 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 988H, Wheel Loaders, Construction
 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 988H, Wheel Loaders, Construction
114,704 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CAVPOWER
Caterpillar 988H, Wheel Loaders, Construction
1,008,026 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.