OPERATOR STATION
CONTROL GP-HYDRAULIC LOCKOUTHYDRAULIC SYSTEM
CONTROL GP-RIDECYLINDER GP
KICKOUT & POSITIONER GP
LINES GP-HYDRAULIC
LINES GP-PILOT
LINES GP-CYLINDER
OPERATOR STATION
CONTROL GP-HYDRAULIC LOCKOUT
#SEBC14740120
9U-2396: CONTROL GP-HYDRAULIC LOCKOUT
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-0387 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 2. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 3. | 6V-7646 | [1] | WASHER-HARD (7.2X25X2-MM THK) | |
| 4. | 9U-0397 | [1] | PLATE | |
| 5. | 4E-9268 | [1] | SHAFT AS | |
| 4S-6525 | [2] | DOWEL | ||
| 6. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 189-7690 | [1] | SUPPORT AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 8. | 8T-4134 M | [1] | NUT (M6X1-THD) | |
| 9. | 4E-2401 | [1] | KNOB | |
| 10. | 9U-0393 | [1] | LEVER AS (HYDRAULIC LOCKOUT) | |
| 11. | 9T-5241 | [2] | WASHER (9.53X18X1-MM THK) | |
| 12. | 8T-7963 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 13. | 4E-9265 | [1] | ROD | |
| 14. | 3B-4607 | [2] | PIN-COTTER | |
| 15. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 16. | 9C-4555 | [1] | SPRING (INNER) | |
| 17. | 9C-4554 | [1] | SPRING (OUTER) | |
| 18. | 8F-4610 | [1] | RING-RETAINING | |
| 19. | 4E-9267 | [1] | GATE | |
| 20. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| M | METRIC PART | |||
#SEBC14740121
2Q-8089: CONTROL GP-RIDE
2Q-8089 CONTROL GP-RIDE -KIT
CUSTOM
CUSTOM
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 194-3978 J | [1] | HARNESS AS-RIDE CONTROL | |
| 102-8802 J | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 J | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 2. | 219-9531 J | [1] | SWITCH AS-ROCKER (24-VOLT)(RIDE CONTROL) | |
| 3. | 5P-9297 J | [2] | CLIP | |
| 4. | 8T-4121 J | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 JM | [1] | NUT (M10X1.5-THD) | |
| 6. | 3S-2093 J | [3] | STRAP-CABLE | |
| 7. | 4E-8813 LI | [1] | HOSE AS | |
| 8. | 4E-8814 LI | [1] | HOSE AS | |
| 9. | 4E-8815 LI | [1] | HOSE AS | |
| 10. | 4E-8817 L | [1] | TUBE AS | |
| 11. | 4E-8818 L | [1] | MANIFOLD | |
| 12. | 9T-9552 LY | [1] | VALVE GP-RIDE CONTROL | |
| 13. | 106-9788 L | [1] | PLATE | |
| 14. | 219-9598 L | [1] | TUBE AS | |
| 15. | 148-8335 L | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5K-9090 L | [1] | SEAL-O-RING | ||
| 6V-8635 L | [1] | CONNECTOR | ||
| 7M-8485 L | [1] | SEAL-O-RING | ||
| 16. | 148-8378 L | [1] | ELBOW AS | |
| 3J-1907 L | [1] | SEAL-O-RING | ||
| 6V-8397 L | [1] | SEAL-O-RING | ||
| 6V-8724 L | [1] | ELBOW | ||
| 17. | 148-8433 L | [1] | TEE AS | |
| 6V-8397 L | [2] | SEAL-O-RING | ||
| 6V-9836 L | [1] | TEE-SWIVEL | ||
| 18. | 1P-3704 L | [2] | SEAL-RECTANGULAR | |
| 19. | 1P-3705 L | [2] | SEAL-RECTANGULAR | |
| 20. | 1P-5767 L | [4] | FLANGE-HALF | |
| 21. | 4J-0520 L | [2] | SEAL-O-RING | |
| 22. | 6V-1572 L | [1] | CLIP (SLOT) | |
| 23. | 6V-1573 L | [1] | CLIP (TAB) | |
| 24. | 6V-1875 L | [1] | GROMMET (48-MM ID) | |
| 25. | 6V-8397 L | [1] | SEAL-O-RING | |
| 26. | 8C-3206 L | [2] | FLANGE-HALF | |
| 27. | 8T-4121 L | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 LM | [1] | NUT (M10X1.5-THD) | |
| 29. | 8T-4174 LM | [8] | BOLT (M16X2X120-MM) | |
| 30. | 8T-4176 LM | [2] | BOLT (M12X1.75X90-MM) | |
| 31. | 8T-4186 LM | [1] | BOLT (M10X1.5X40-MM) | |
| 32. | 8T-4194 LM | [8] | BOLT (M12X1.75X50-MM) | |
| 33. | 8T-4196 LM | [4] | BOLT (M10X1.5X35-MM) | |
| 34. | 8T-4223 L | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-5439 L | [4] | WASHER-HARD (21.5X45X6-MM THK) | |
| 36. | 8T-5460 LM | [4] | BOLT (M20X2.5X40-MM) | |
| 37. | 4E-8832 N | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 38. | 219-7898 N | [2] | PLATE | |
| 39. | 219-7981 NY | [2] | ACCUMULATOR GP-RIDE CONTROL (CHARGED) | |
| 40. | 219-9547 N | [2] | CLAMP AS | |
| 41. | 5P-1076 N | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 42. | 8T-4139 NM | [4] | BOLT (M12X1.75X30-MM) | |
| 43. | 8T-4194 NM | [4] | BOLT (M12X1.75X50-MM) | |
| 44. | 8T-4195 NM | [4] | BOLT (M10X1.5X30-MM) | |
| 45. | 8T-4223 N | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 46. | 8T-4244 NM | [2] | NUT (M12X1.75-THD) | |
| 47. | 8T-4956 NM | [6] | BOLT (M12X1.75X35-MM) | |
| 48. | 8T-4121 N | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 241-0180 O | [1] | HARNESS AS-RIDE CONTROL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 50. | 130-5300 O | [1] | CLIP | |
| 51. | 8M-2772 O | [1] | CLIP (LOOP) | |
| 52. | 9X-6772 O | [2] | STRAP-CABLE | |
| 227-3243 FT | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 8T-3597 FTM | [2] | NUT-WELD (M12X1.75-THD) | ||
| 227-3245 FT | [2] | PLATE | ||
| *****STANDARD REMOVAL***** | ||||
| 1P-3705 FP | [2] | SEAL-RECTANGULAR | ||
| 5P-0049 FP | [2] | COVER | ||
| 5P-8077 FP | [4] | FLANGE-HALF | ||
| 8T-4140 FPM | [8] | BOLT (M16X2X60-MM) | ||
| 9X-8257 FP | [8] | WASHER (17.5X30X3.5-MM THK) | ||
| 148-8367 FQ | [1] | ELBOW AS | ||
| 5H-4019 FS | [1] | COVER | ||
| THIS KIT PROVIDES NECESSARY HARDWARE & INSTRUCTIONS TO FIELD INSTALL RIDE CONTROL SYSTEM ON 990 WHEEL LOADER MACHINE | ||||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | PART OF STANDARD WIRING GP-RIDE CONTROL | |||
| L | PART OF STANDARD LINES GP-ACCUMULATOR,RIDE CONTROL | |||
| M | METRIC PART | |||
| N | PART OF STANDARD ACCUMULATOR GP- | |||
| O | PART OF WIRING GP-RIDE | |||
| P | PART OF STANDARD LINES GP-LIFT CYLINDER | |||
| Q | PART OF STANDARD LINES GP-PILOT | |||
| S | PART OF STANDARD VALVE & LINES GP-MAIN CONTROL | |||
| T | USED TO MOUNT ACCUMULATORS ON MACHINES WITH SERIAL NUMBERS FROM BCR001 TO BCR152 | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14740122
262-3668: CYLINDER GP-LIFT
262-3668 CYLINDER GP-LIFT
254.0-MM BORE X 1270.0-MM STROKE. CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
254.0-MM BORE X 1270.0-MM STROKE. CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 262-3670 | [1] | CYLINDER AS | |
| 6E-1166 | [1] | BEARING | ||
| 2. | 262-3676 | [1] | ROD AS | |
| 6E-1364 | [1] | BUSHING | ||
| 3. | 262-3888 | [1] | HEAD | |
| 4. | 262-3889 | [1] | PISTON | |
| 5. | 262-3981 | [1] | RING-WEAR | |
| 6. | 107-9467 M | [8] | BOLT (M36X4X150-MM) | |
| 8. | 158-3033 | [1] | RING-BACKUP | |
| 9. | 167-2233 | [1] | SEAL AS | |
| 10. | 167-2352 | [1] | SEAL-U-CUP | |
| 11. | 172-3542 | [1] | SEAL AS | |
| 12. | 173-9682 M | [6] | BOLT (M36X4X100-MM) | |
| 13. | 225-3296 | [1] | SEAL-WIPER | |
| 14. | 5M-6666 | [14] | WASHER (38.5X55.3X5-MM THK) | |
| 15. | 5P-2235 | [1] | SEAL-O-RING | |
| 16. | 8C-3843 | [1] | RING-WEAR | |
| M | METRIC PART | |||
#SEBC14740123
262-6724: CYLINDER GP-TILT
262-6724 CYLINDER GP-TILT
317.5-MM BORE X 819.0-MM STROKE. CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
317.5-MM BORE X 819.0-MM STROKE. CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5022 | [1] | LOCKNUT (4 1/2-12-THD) | |
| 2. | 6E-0245 J | [1] | RING-WEAR | |
| 3. | 6E-0308 J | [2] | RING-WEAR | |
| 4. | 157-7245 J | [1] | RING-BACKUP | |
| 5. | 167-2239 J | [1] | SEAL AS-BUFFER | |
| 6. | 192-1453 J | [1] | SEAL AS | |
| 7. | 193-4077 | [1] | HEAD | |
| 8. | 225-3299 J | [1] | SEAL-WIPER | |
| 9. | 262-6725 | [1] | CYLINDER AS | |
| 6E-1166 | [1] | BEARING | ||
| 10. | 345-8417 | [1] | ROD AS-HYDRAULIC CYLINDER | |
| 6E-1166 | [1] | BEARING | ||
| 11. | 269-4738 | [1] | PISTON | |
| 12. | 167-2354 J | [1] | SEAL-U-CUP | |
| 14. | 320-2510 J | [1] | SEAL-O-RING | |
| 15. | 6V-3263 J | [1] | SEAL-O-RING | |
| 16. | 8T-0283 M | [12] | BOLT (M30X3.5X110-MM) | |
| 17. | 7X-2584 M | [2] | BOLT (M30X3.5X140-MM) | |
| 18. | 9X-8399 | [14] | WASHER (33X56X6-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 336-7365 J | [1] | KIT-HYD CYLINDER SEAL | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBC14740124
271-3216: KICKOUT & POSITIONER GP
271-3216 KICKOUT & POSITIONER GP
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 1
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 1
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7843 Y | [1] | CONTROL GP-POSITION (BUCKET) | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 4E-5213 | [1] | COVER AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 5. | 054-6197 | [1] | TUBE | |
| 6. | 101-8687 | [1] | TUBE AS | |
| 7. | 101-8688 | [4] | CLAMP | |
| 8. | 101-8690 | [2] | MAGNET AS | |
| 9. | 101-8691 | [1] | PLATE | |
| 10. | 101-8692 | [1] | BRACKET AS | |
| 11. | 101-8693 | [1] | PLATE | |
| 12. | 101-8694 | [2] | BLOCK | |
| 13. | 101-8695 | [1] | STRIP AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 14. | 125-1153 Y | [1] | WIRING GP-KICKOUT & POSITIONER | |
| 15. | 053-2171 | [1] | GROMMET | |
| 16. | 2T-3019 | [1] | CLIP | |
| 17. | 4D-7794 | [1] | CLIP | |
| 18. | 4K-8302 | [1] | CLIP (LOOP) | |
| 19. | 5P-9297 | [2] | CLIP | |
| 20. | 6D-4636 | [2] | CLIP (LOOP) | |
| 21. | 6V-1572 | [2] | CLIP (SLOT) | |
| 22. | 6V-1573 | [2] | CLIP (TAB) | |
| 23. | 6V-1875 | [2] | GROMMET (48-MM ID) | |
| 24. | 6V-8210 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 26. | 7X-2549 M | [1] | BOLT (M12X1.75X100-MM) | |
| 27. | 7X-2550 M | [4] | BOLT (M12X1.75X110-MM) | |
| 28. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 29. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 30. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 32. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 33. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 34. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 35. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 36. | 8T-4197 M | [4] | BOLT (M8X1.25X40-MM) | |
| 37. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 39. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 40. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 41. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 42. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14740125
271-3216: KICKOUT & POSITIONER GP
271-3216 KICKOUT & POSITIONER GP
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 2
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 2
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7843 Y | [1] | CONTROL GP-POSITION (BUCKET) | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 4E-5213 | [1] | COVER AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 5. | 4V-1939 C | [2] | CLAMP | |
| 6. | 107-4749 C | [1] | PLATE | |
| 7. | 101-8687 | [1] | TUBE AS | |
| 8. | 101-8688 | [4] | CLAMP | |
| 9. | 101-8690 | [2] | MAGNET AS | |
| 10. | 101-8691 | [1] | PLATE | |
| 11. | 101-8692 | [1] | BRACKET AS | |
| 12. | 101-8693 | [1] | PLATE | |
| 13. | 101-8694 | [2] | BLOCK | |
| 14. | 101-8695 | [1] | STRIP AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 15. | 341-9567 C | [1] | HARNESS AS-SOLENOID | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 9X-2383 G | HOSE (27.6-IN) | |||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS) | ||||
| 16. | 053-2171 | [1] | GROMMET | |
| 17. | 2T-3019 | [1] | CLIP | |
| 18. | 4D-7794 | [1] | CLIP | |
| 19. | 5P-1075 C | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 20. | 5P-8939 C | [1] | GROMMET | |
| 21. | 5P-9297 | [2] | CLIP | |
| 22. | 6D-4636 C | [2] | CLIP (LOOP) | |
| 23. | 6V-1572 C | [2] | CLIP (SLOT) | |
| 24. | 6V-1573 C | [2] | CLIP (TAB) | |
| 25. | 5P-7703 C | [2] | GROMMET (52-MM ID) | |
| 26. | 6V-8210 M | [2] | BOLT (M8X1.25X16-MM) | |
| 27. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 28. | 7X-2534 CM | [2] | BOLT (M6X1X50-MM) | |
| 29. | 7X-2550 M | [4] | BOLT (M12X1.75X110-MM) | |
| 30. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 31. | 7X-7729 C | [2] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-1889 C | [1] | CLIP (SLOT) | |
| 33. | 8T-1890 C | [1] | CLIP (TAB) | |
| 34. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4133 CM | [5] | NUT (M10X1.5-THD) | |
| 36. | 8T-4136 CM | [1] | BOLT (M10X1.5X25-MM) | |
| 37. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 38. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 39. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 40. | 8T-4195 CM | [2] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4197 M | [4] | BOLT (M8X1.25X40-MM) | |
| 42. | 8T-4223 C | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 45. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 46. | 9X-8256 C | [2] | WASHER (6.6X12X2-MM THK) | |
| 47. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14740126
2Q-4464: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [2] | CAP-DUST | |
| 2. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 3. | 1P-3704 | [8] | SEAL-RECTANGULAR | |
| 4. | 1P-5767 | [16] | FLANGE-HALF | |
| 5. | 3J-1907 | [2] | SEAL-O-RING | |
| 6. | 5P-0048 | [2] | COVER | |
| 13. | 5P-1076 | [32] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 6V-7673 M | [32] | BOLT (M12X1.75X50-MM) | |
| 16. | 7Y-4038 | [16] | CLAMP-HALF | |
| 17. | 8K-3235 | [8] | SPACER-SPECIAL | |
| 18. | 8T-4223 | [32] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4244 M | [16] | NUT (M12X1.75-THD) | |
| 20. | 8T-6868 M | [16] | BOLT (M12X1.75X80-MM) | |
| M | METRIC PART | |||
#SEBC14740127
336-4277: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [2] | CAP-DUST | |
| 2. | 189-7787 | [2] | MANIFOLD | |
| 3. | [2] | TUBE AS | ||
| 4. | I | [1] | HOSE AS | |
| 5. | I | [1] | HOSE AS | |
| 6. | I | [2] | HOSE AS | |
| 7. | 337-0432 | [1] | TUBE AS | |
| 8. | 337-0433 | [1] | TUBE AS | |
| 9. | 164-5567 | [2] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 10. | 172-9966 M | [8] | BOLT (M12X1.75X65-MM) | |
| 11. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 12. | 1P-3704 | [8] | SEAL-RECTANGULAR | |
| 13. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 14. | 1P-5767 | [16] | FLANGE-HALF | |
| 15. | 5P-0048 | [2] | COVER | |
| 16. | 6V-0400 | [4] | FLANGE-HALF | |
| 17. | 7X-2549 M | [8] | BOLT (M12X1.75X100-MM) | |
| 18. | 8K-3235 | [10] | SPACER-SPECIAL | |
| 19. | 8K-4691 | [20] | CLAMP-HALF | |
| 20. | 8T-4194 M | [16] | BOLT (M12X1.75X50-MM) | |
| 21. | 8T-4223 | [80] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4244 M | [20] | NUT (M12X1.75-THD) | |
| 23. | 8T-4910 M | [16] | BOLT (M12X1.75X60-MM) | |
| 24. | 8T-6868 M | [12] | BOLT (M12X1.75X80-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBC14740128
189-7701: LINES GP-PILOT
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-8913 | [4] | CLAMP-HALF | |
| 2. | 7T-9099 I | [1] | HOSE AS | |
| 3. | 8W-0227 I | [2] | HOSE AS | |
| 4. | 238-6664 I | [1] | HOSE AS | |
| 5. | 148-8457 | [2] | UNION AS (STRAIGHT) | |
| (EACH INCLUDES) | ||||
| 6V-8398 | [2] | SEAL-O-RING | ||
| 6V-8995 | [1] | UNION (STRAIGHT) | ||
| 6. | 150-4043 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 6V-9873 | [1] | CONNECTOR | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 7. | 153-6241 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 8C-8989 | [1] | ELBOW | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8. | 164-5633 | [1] | ADAPTER AS | |
| 112-7614 | [1] | ADAPTER | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9. | 5P-7470 | [5] | CLIP (SLOT) | |
| 10. | 5P-7471 | [5] | CLIP (TAB) | |
| 11. | 5P-7703 | [5] | GROMMET (52-MM ID) | |
| 12. | 6V-9169 | [2] | NUT (13/16-16-THD) | |
| 13. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | |
| 17. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| *****STANDARD REMOVAL***** | ||||
| 6D-1641 FN | [5] | CLIP | ||
| 8T-4121 FN | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4137 FNM | [1] | BOLT (M10X1.5X20-MM) | ||
| 8T-4195 FNM | [2] | BOLT (M10X1.5X30-MM) | ||
| 8T-4133 FM | [1] | NUT (M10X1.5-THD) | ||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| N | PART OF LINES GP-PILOT | |||
#SEBC14740129
271-3215: LINES GP-TILT CYLINDER
271-3215 LINES GP-TILT CYLINDER
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 1
CUSTOM
PART OF 2Q-8673 LOGGING AR, 2Q-8686 STEEL MILL AR
Type 1
For full view, you need register
Parts for your 990H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-5360 | [2] | SPACER (30-MM THK) | |
| 2. | 4E-5410 I | [1] | HOSE AS | |
| 3. | 4E-5411 I | [1] | HOSE AS | |
| 4. | 4E-5415 I | [2] | HOSE AS | |
| 5. | 4E-5416 | [1] | TUBE AS | |
| 6. | 4E-5417 | [1] | TUBE AS | |
| 7. | 4E-5421 | [2] | MANIFOLD | |
| 8. | 211-0507 | [2] | BRACKET AS | |
| 9. | 271-3220 I | [1] | HOSE AS | |
| 10. | 275-9914 | [1] | MANIFOLD | |
| 11. | 278-0575 | [1] | BRACKET AS | |
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 12. | 095-0705 M | [4] | BOLT-SOCKET HEAD (M16X2X100-MM) | |
| 13. | 1P-3705 | [11] | SEAL-RECTANGULAR | |
| 14. | 1P-3706 | [2] | SEAL-RECTANGULAR | |
| 15. | 2S-4078 | [1] | SEAL-O-RING | |
| 16. | 3J-1907 | [4] | SEAL-O-RING | |
| 17. | 5P-8077 | [20] | FLANGE-HALF | |
| 18. | 6V-0852 | [2] | CAP-DUST | |
| 19. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
| 20. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| 21. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 22. | 7Y-4039 | [4] | CLAMP-HALF | |
| 23. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 24. | 8T-4140 M | [36] | BOLT (M16X2X60-MM) | |
| 25. | 8T-4193 M | [8] | BOLT (M16X2X50-MM) | |
| 26. | 8T-4223 | [17] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 28. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 29. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 30. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 31. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 32. | 9S-6130 | [1] | PLUG | |
| 33. | 9X-8257 | [42] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
