WORK TOOLS
RIPPER GPGROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
RIPPER GP
#SEBC14780180
261-0210: FRAME GP-RIPPER
261-0210 FRAME GP-RIPPER
PART OF 2Q-8629 RIPPER AR
PART OF 2Q-8629 RIPPER AR
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-3628 | [2] | PIN AS | |
| 2. | 6J-9482 | [2] | PIN AS | |
| 3. | 7T-9658 | [1] | FRAME AS | |
| 3A. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 3B. | 4S-1722 | [2] | BOSS | |
| 3C. | 9J-6687 | [4] | BUSHING | |
| 3J-6035 | [2] | RETAINER | ||
| 4. | 9J-4437 | [12] | WASHER | |
| 5. | 9J-6689 | [2] | PIN AS | |
| 6. | 225-3287 | [8] | SEAL-WIPER | |
| 7. | 3J-6034 | [6] | PLATE | |
| 8. | 5P-4061 | [8] | SEAL-LIP TYPE | |
| 9. | 7K-9211 | [8] | SEAL-LIP TYPE | |
| 10. | 8T-4994 | [12] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 11. | 8T-9398 | [12] | BOLT (3/4-10X1.75-IN) |
#SEBC14780181
250-7016: MOUNTING GP-RIPPER
250-7016 MOUNTING GP-RIPPER -CUSTOM
PART OF 2Q-8608 RIPPER AR
PART OF 2Q-8608 RIPPER AR
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-4108 | [4] | PIN | |
| 2. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 4J-3583 | [2] | SCREW-ADJUSTMENT | |
| 4. | 6J-4655 | [4] | RETAINER | |
| 5. | [2] | PLATE AS | ||
| 6. | [2] | GUARD AS | ||
| 7. | [1] | GUARD AS | ||
| 8. | [2] | BRACE AS | ||
| (EACH INCLUDES) | ||||
| 8J-4866 | [1] | LUG | ||
| 9. | [2] | ADJUSTER | ||
| 10. | 250-7187 | [1] | BRACKET AS (RH) | |
| 3J-6035 | [3] | RETAINER | ||
| 11. | 250-7188 | [1] | BRACKET AS (LH) | |
| 3J-6035 | [3] | RETAINER | ||
| 12. | 5P-1076 | [16] | WASHER-HARD (13.5X30X4-MM THK) | |
| 13. | 8T-0283 M | [24] | BOLT (M30X3.5X110-MM) | |
| 14. | 8T-4122 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 15. | 8T-4139 M | [24] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-4193 M | [8] | BOLT (M16X2X50-MM) | |
| 17. | 9X-8399 | [24] | WASHER (33X56X6-MM THK) | |
| M | METRIC PART | |||
#SEBC14780182
288-7325: MOUNTING GP-RIPPER
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6J-9480 | [2] | PIN AS | |
| 2. | 6J-9482 | [4] | PIN AS | |
| 3. | [2] | DOWEL | ||
| 4. | [1] | BRACKET AS-MOUNTING (RH) | ||
| 3J-6035 | [3] | RETAINER | ||
| 5. | [1] | BRACKET AS-MOUNTING (LH) | ||
| 3J-6035 | [3] | RETAINER | ||
| 6. | 3J-6034 | [6] | PLATE | |
| 7. | 5D-0764 | [24] | WASHER-HARD (34X57X8-MM THK) | |
| 8. | 5D-4661 | [20] | WASHER-HARD (28X52.5X8-MM THK) | |
| 9. | 7X-0616 | [4] | WASHER-HARD (28X57X6-MM THK) | |
| 10. | 8T-0369 M | [24] | BOLT (M30X3.5X120-MM) | |
| 11. | 8T-0670 M | [20] | BOLT (M24X3X140-MM) | |
| 12. | 8T-4994 | [12] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 13. | 8T-5878 M | [4] | BOLT (M24X3X80-MM) | |
| 14. | 8T-9398 | [12] | BOLT (3/4-10X1.75-IN) | |
| M | METRIC PART | |||
#SEBC14780183
2Q-8608: RIPPER AR
2Q-8608 RIPPER AR -CUSTOM
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | COOLER GP-AXLE OIL | ||
| Y | [1] | COVER GP-ACCESS | ||
| Y | [1] | FRAME AS-FRONT | ||
| Y | [1] | FRAME AS-REAR | ||
| Y | [1] | GUARD GP-RADIATOR | ||
| Y | [1] | LINES GP-HYDRAULIC | ||
| Y | [1] | LINES GP-LIFT CYLINDER | ||
| Y | [1] | LINES GP-PILOT | ||
| Y | [1] | LINES GP-RIPPER | ||
| Y | [1] | LINES GP-TILT CYLINDER | ||
| Y | [1] | MOUNTING GP-BUMPER | ||
| Y | [1] | MOUNTING GP-RIPPER | ||
| Y | [1] | OPERATOR AR | ||
| Y | [1] | TANK & BUMPER AR-FUEL | ||
| Y | [1] | VALVE & MTG GP-DIVERTER (RIPPER CIRCUIT) | ||
| Y | [1] | VALVE & MTG GP-DIVERTER (TILT CIRCUIT) | ||
| Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| Y | [1] | WIRING GP-FRONT | ||
| [1] | WIRE AS (GROUND) | |||
| 113-0583 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| *****STANDARD REMOVAL***** | ||||
| 229-5392 AJ | [1] | COOLER AR-AXLE OIL | ||
| 210-2665 AL | [1] | COVER GP-ACCESS (FRONT FRAME) | ||
| 195-9980 AL | [1] | FRAME AS-FRONT | ||
| 167-7460 AL | [1] | FRAME AS-REAR | ||
| 169-6826 AL | [1] | GUARD GP-RADIATOR | ||
| 212-5806 AJ | [1] | LINES GP-HYDRAULIC | ||
| 212-2132 AJ | [1] | LINES GP-LIFT CYLINDER | ||
| 213-3481 AJ | [1] | LINES GP-PILOT | ||
| 211-2675 AJ | [1] | LINES GP-TILT CYLINDER | ||
| 170-1931 AL | [1] | MOUNTING GP-BUMPER | ||
| AL | [1] | OPERATOR AR | ||
| AL | [1] | TANK & BUMPER AR-FUEL | ||
| 178-2967 AJ | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| 175-3731 AN | [1] | WIRING GP-FRONT | ||
| A | NOT PART OF THIS GROUP | |||
| J | PART OF STANDARD HYDRAULIC AR | |||
| L | PART OF STANDARD CHASSIS AR | |||
| N | PART OF STANDARD ELECTRICAL AR | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14780184
2Q-8629: RIPPER AR
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 250-7188 | [1] | BRACKET AS (LH) | |
| 2. | 192-6446 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 192-6445 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 4T-6970 Y | [2] | CYLINDER GP-RIPPER TILT | |
| 7. | 261-0121 Y | [1] | LINES GP-RIPPER | |
| 8. | 261-0210 Y | [1] | FRAME GP-RIPPER | |
| 9. | 261-0118 Y | [1] | RIPPER GP | |
| 10. | 250-7187 | [1] | BRACKET AS (RH) | |
| 11. | 8T-0283 M | [20] | BOLT (M30X3.5X110-MM) | |
| 12. | 9X-8399 | [24] | WASHER (33X56X6-MM THK) | |
| 13. | 9X-6618 M | [4] | BOLT (M30X3.5X130-MM) | |
| 14. | 264-9855 | [1] | PLATE AS | |
| 15. | 8T-4193 M | [6] | BOLT (M16X2X50-MM) | |
| 16. | 9X-8257 | [6] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14780185
2Q-8688: RIPPER AR
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CAB AR | ||
| Y | [1] | COOLER GP-AXLE OIL | ||
| Y | [1] | COVER GP-ACCESS | ||
| Y | [1] | FRAME AS-FRONT | ||
| Y | [1] | FRAME AS-REAR | ||
| Y | [1] | GUARD GP-RADIATOR | ||
| Y | [1] | LINES GP-HYDRAULIC | ||
| Y | [1] | LINES GP-LIFT CYLINDER | ||
| Y | [1] | LINES GP-PILOT | ||
| Y | [1] | LINES GP-RIPPER | ||
| Y | [1] | LINES GP-TILT CYLINDER | ||
| Y | [1] | MOUNTING GP-RIPPER | ||
| Y | [1] | TANK & BUMPER AR-FUEL | ||
| Y | [1] | VALVE & MTG GP-DIVERTER (RIPPER CIRCUIT) | ||
| Y | [1] | VALVE & MTG GP-DIVERTER (TILT CIRCUIT) | ||
| Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| 258-9759 Y | [1] | WIRING GP-FRONT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14780186
261-0118: RIPPER GP
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS#SEBC14780187
6Y-6140: TOOTH GP-RIPPER
6Y-6140 TOOTH GP-RIPPER
PART OF 261-0118 RIPPER GP
PART OF 261-0118 RIPPER GP
For full view, you need register
Parts for your 854G WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-6509 | [1] | PIN | |
| 2. | 9W-8365 | [1] | PROTECTOR | |
| 3. | 4T-5502 | [1] | TIP-RIPPER | |
| 4. | 102-9062 C | [2] | PIN AS | |
| (EACH INCLUDES) | ||||
| 4A. | 102-9073 | [1] | SPRING | |
| 5. | 6Y-1202 C | [3] | RETAINER AS | |
| (EACH INCLUDES) | ||||
| 5A. | 7M-9107 | [1] | RING-LOCK | |
| 6. | 8E-8415 C | [1] | SHANK AS-RIPPER | |
| 6A. | 3G-5596 | [1] | LUG | |
| 7. | 6Y-1204 C | [3] | PIN | |
| C | CHANGE FROM PREVIOUS TYPE | |||
