380-7700 WIRING GP-PROTECTION -LOADER FRAME CUSTOM PART OF 380-7698 ELECTRICAL AR 966H WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 380-7700 WIRING GP-
1. 380-7701 WIRING GP-
2. 380-7703 WIRING GP-
3. 380-7705 WIRING GP-
4. 380-7707 WIRING GP-
5. 380-7708 WIRING GP-
6. 381-0185 WIRING GP-

POWER TRAIN

FILTER GP

7. 231-6181 FILTER GP-

LINES GP-POWER TRAIN OIL

8. 308-8444 LINES GP-P

FRAME AND BODY

FENDER GP

9. 303-4700 FENDER GP
0. INFORMATION

WHEEL LOADER 966H WHEEL LOADER RYF
380–7254 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 966H WHEEL LOADER RYF00001-UP (MACHINE) SEBC1545 966H RYF (2009)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

306-5317 WIRING GP-CAB

306-5315 WIRING GP-CHASSIS

380-7699 WIRING GP-PROTECTION

380-7700 WIRING GP-PROTECTION

380-7701 WIRING GP-PROTECTION

380-7703 WIRING GP-PROTECTION

380-7705 WIRING GP-PROTECTION

380-7707 WIRING GP-PROTECTION

380-7708 WIRING GP-PROTECTION

381-0185 WIRING GP-PROTECTION

#SEBC15450020

380-7700: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7700 WIRING GP-PROTECTION -LOADER FRAME
CUSTOM
PART OF 380-7698 ELECTRICAL AR

i04555699 SEBC1545

3807700 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-1225	[4]	WASHER (11X22X6-MM THK)
2.	Y	[1]	WIRING GP-PROTECTION (LOADER FRAME)(CONTROL VALVE)
3.	Y	[1]	WIRING GP-PROTECTION (AXLE TEMPERATURE HARNESS)
4.	158-0851	[1]	CLIP
5.	198-4777	[2]	WASHER-HARD (11X25X10-MM THK)
6.	1S-0994	[1]	CLIP
7.	3S-8665	[6]	CLIP
8.	4S-1962	[9]	CLIP
9.	6V-1889	[1]	CLIP
10.	7D-7233	[3]	CLIP
11.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)

			**STANDARD REMOVAL**
	7K-1181 FJ	[22]	STRAP-CABLE
	204-8000 FJ	[16]	MOUNTING-CABLE TIE
	193-3973 FJ	[16]	STRAP-CABLE
	4P-7429 FJ	[2]	CLIP
	4P-7581 FJ	[1]	CLIP
	4P-7428 FJ	[3]	CLIP
	147-0385 FJ	[1]	CLIP
	130-5300 FJ	[3]	CLIP
	328-4403 FJ	[1]	HARNESS AS-FRONT
	9M-8406 FL	[1]	CLIP
	278-5259 FL	[1]	HARNESS AS-SENSOR (AXLE TEMPERATURE)
	F		NOT SHOWN
	J		PART OF STANDARD WIRING GP-FRONT
	L		PART OF STANDARD WIRING GP-AXLE TEMPERATURE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC15450021

380-7701: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7701 WIRING GP-PROTECTION -CHASSIS
CUSTOM
PART OF 380-7698 ELECTRICAL AR

i04555703 SEBC1545

3807701 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-0597	[1]	CLAMP-HOSE
2.	Y	[1]	WIRING GP-PROTECTION (CHASSIS)
3.	Y	[1]	WIRING GP-PROTECTION (BREAKER PANEL)
4.	067-3045	[2]	CLIP
5.	095-0914	[4]	CLIP
6.	1S-0994	[4]	CLIP

			**STANDARD REMOVAL**
	204-8000 FJ	[6]	MOUNTING-CABLE TIE
	193-3973 FJ	[6]	STRAP-CABLE
	3S-2093 FJ	[9]	STRAP-CABLE
	130-5300 FJ	[1]	CLIP
	067-2551 FJ	[3]	CLIP
	328-4400 FJ	[1]	HARNESS AS-CHASSIS
	328-4399 FL	[1]	HARNESS AS-CHASSIS
	F		NOT SHOWN
	J		PART OF STANDARD WIRING GP-CHASSIS
	L		PART OF STANDARD PANEL GP-CIRCUT BREAKER
	Y		SEPARATE ILLUSTRATION

#SEBC15450022

380-7703: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7703 WIRING GP-PROTECTION -TILT POSITION SENSOR
CUSTOM
PART OF 380-7699 WIRING GP-PROTECTION

i04644476 SEBC1545

3807703 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9M-7958	[6]	CLAMP-HOSE
2.	316-8510	[1]	HARNESS AS-SENSOR (TILT)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	9X-1813 E		SLEEVE (20-CM)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3.	2Q-0604 E		INSULATION (159-CM)
3A.	2Q-0604 E		INSULATION (69-CM)
3B.	2Q-0604 E		INSULATION (44-CM)
	E		ORDER BY THE CENTIMETER

#SEBC15450023

380-7705: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7705 WIRING GP-PROTECTION -LOADER FRAME
CUSTOM
PART OF 380-7700 WIRING GP-PROTECTION

i04639370 SEBC1545

3807705 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-0597	[1]	CLAMP-HOSE
2.	328-4403	[1]	HARNESS AS-FRONT
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	5P-1506 E		HOSE (65-CM)
	8T-8737	[21]	PLUG-SEAL
	113-0580	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	114-8843 E		SLEEVE-PLASTIC (400-CM)
	114-8845 E		SLEEVE-PLASTIC (20-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[38]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[38]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1767	[13]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[42]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[42]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[16]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	1P-0810 E		TAPE-ELECTRICAL (6-CM)
	274-3774	[6]	CAP-CONNECTOR
3.	5D-1026	[29]	CLAMP-BAND
4.	9M-7958	[30]	CLAMP-HOSE
5.	193-6911 E		INSULATION (12-CM EACH)
5A.	193-6911 E		INSULATION (14-CM)
5B.	193-6911 E		INSULATION (15-CM)
6.	2Q-0604 E		INSULATION (25-CM EACH)
6A.	2Q-0604 E		INSULATION (50-CM)
6B.	2Q-0604 E		INSULATION (14-CM EACH)
6C.	2Q-0604 E		INSULATION (34-CM)
6D.	2Q-0604 E		INSULATION (20-CM EACH)
6E.	2Q-0604 E		INSULATION (16-CM EACH)
6F.	2Q-0604 E		INSULATION (31-CM)
6G.	2Q-0604 E		INSULATION (93-CM)
6H.	2Q-0604 E		INSULATION (26-CM)
6J.	2Q-0604 E		INSULATION (60-CM EACH)
6K.	2Q-0604 E		INSULATION (150-CM)
6M.	2Q-0604 E		INSULATION (130-CM)
6N.	2Q-0604 E		INSULATION (40-CM)
6P.	2Q-0604 E		INSULATION (35-CM)
6R.	2Q-0604 E		INSULATION (30-CM EACH)
6S.	2Q-0604 E		INSULATION (36-CM)
	E		ORDER BY THE CENTIMETER

#SEBC15450024

380-7707: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7707 WIRING GP-PROTECTION -CHASSIS
CUSTOM
PART OF 380-7701 WIRING GP-PROTECTION

i04643413 SEBC1545

3807707 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	328-4399	[1]	HARNESS AS-CHASSIS
	8N-1535	[1]	BELL AS-END
	274-3774	[1]	CAP-CONNECTOR
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	310-0674	[1]	LOCKWASHER
	211-0052	[1]	NUT (1-11/16-18-THD)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	7G-7917	[1]	PLUG-SEAL
	7G-7918	[2]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	8T-8737	[68]	PLUG-SEAL
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
	144-1636	[38]	PIN-CONNECTOR (14-GA TO 18-GA)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	183-5784	[1]	PLUG AS-CONNECTOR (40-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1541	[2]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	126-1766	[152]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[19]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	114-8843 E		SLEEVE-PLASTIC (380-CM)
	E		SLEEVE-PLASTIC (120-CM)
	114-8845 E		SLEEVE-PLASTIC (80-CM)
	289-5150 E		SLEEVE (59-CM)
	289-5151 E		SLEEVE (23-CM)
	317-1204 E		SLEEVE (68-CM)
	337-7979 E		SLEEVE (130-CM)
	3S-2093	[2]	STRAP-CABLE
	9X-6772	[1]	STRAP-CABLE
	1P-0810 B	[1]	TAPE-ELECTRICAL
	131-1487	[2]	TERMINAL AS (6-GA TO 8-GA)
	131-1492	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	278-1438	[1]	TERMINAL-RING
		[1]	TERMINAL AS-RING
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(8-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
2.	5D-1026	[5]	CLAMP-BAND
3.	9M-7958	[7]	CLAMP-HOSE
4.	2Q-0604 E		INSULATION (35-CM)
5.	193-6911 E		INSULATION (76-CM)
5A.	193-6911 E		INSULATION (18-CM)
5B.	193-6911 E		INSULATION (35-CM)
6.	2Q-0584 E		INSULATION (105-CM)
6A.	2Q-0584 E		INSULATION (35-CM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBC15450025

380-7708: WIRING GP-PROTECTION

WIRING GP-PROTECTION

380-7708 WIRING GP-PROTECTION -BREAKER PANEL
CUSTOM
PART OF 380-7701 WIRING GP-PROTECTION

i04643404 SEBC1545

3807708 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	328-4400	[1]	HARNESS AS-CHASSIS
	8T-8737	[3]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (100-CM)
	E		SLEEVE-PLASTIC (20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
2.	9M-7958	[20]	CLAMP-HOSE
3.	2Q-0584 E		INSULATION (30-CM)
4.	193-6911 E		INSULATION (37-CM)
4A.	193-6911 E		INSULATION (15-CM)
4B.	193-6911 E		INSULATION (40-CM)
5.	2Q-0604 E		INSULATION (124-CM)
5A.	2Q-0604 E		INSULATION (35-CM)
5B.	2Q-0604 E		INSULATION (34-CM)
5C.	2Q-0604 E		INSULATION (70-CM)
	E		ORDER BY THE CENTIMETER

#SEBC15450026

381-0185: WIRING GP-PROTECTION

WIRING GP-PROTECTION

381-0185 WIRING GP-PROTECTION -AXLE TEMPERATURE HARNESS
CUSTOM
PART OF 380-7700 WIRING GP-PROTECTION

i04639550 SEBC1545

3810185 WIRING GP-PROTECTION Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9M-7958	[2]	CLAMP-HOSE
2.	278-5259	[1]	HARNESS AS-SENSOR (AXLE TEMPERATURE)(FRONT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS AND WEDGE)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	114-8843 E		SLEEVE-PLASTIC (40-CM)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS AND WEDGE)
3.	2Q-0604 E		INSULATION (97-CM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

#SEBC15450027

231-6181: FILTER GP-OIL

FILTER GP-OIL

231-6181 FILTER GP-OIL
PART OF 380-7254 STEEL MILL AR

i04547978 SEBC1545

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6744	[1]	SWITCH GP-PRESSURE (ROTOR TRANSMISSION)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 BE		SLEEVE
2.	183-7264	[1]	VALVE AS-FLUID SAMPLING (ROTOR TRANSMISSION)
3.	3J-1907	[1]	SEAL-O-RING
4.	108-1153	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(ROTOR TRANSMISSION)
5.	8C-3447	[1]	CAP-DUST
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBC15450028

308-8444: LINES GP-POWER TRAIN FILTER

LINES GP-POWER TRAIN FILTER

308-8444 LINES GP-POWER TRAIN FILTER -WITH HEAT INSULATION
CUSTOM
PART OF 303-4689 PROTECTION AR-HEAT

i04547588 SEBC1545

3088444 LINES GP-POWER TRAIN FILTER Parts scheme

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.		[2]	HOSE AS
			(EACH HOSE AS INCLUDES)
	276-9775 I	[1]	HOSE AS
	9M-0164	[2]	CLAMP-HOSE
	2Q-0584 E		INSULATION (123-CM EACH)
2.	9M-0164	[4]	CLAMP-HOSE

			**STANDARD REMOVAL**
	276-9775 FJI	[2]	HOSE AS
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		PART OF STANDARD FILTER & LINES GP-TRANSMISSION

#SEBC15450029

303-4700: FENDER GP

FENDER GP

303-4700 FENDER GP
CUSTOM
PART OF 380-7254 STEEL MILL AR

i04550246 SEBC1545

For full view, you need register

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	201-6775	[1]	FENDER AS-FRONT (LH)
2.	201-6776	[1]	FENDER AS-FRONT (RH)
3.	201-6780	[1]	PLATE (LH)
4.	201-6781	[1]	PLATE (RH)
5.	329-1690	[1]	FENDER AS (LH)
6.	329-1691	[1]	FENDER AS (RH)
7.	245-7727	[2]	COVER
8.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
9.	5P-1076	[12]	WASHER-HARD (13.5X30X4-MM THK)
10.	198-4777	[12]	WASHER-HARD (11X25X10-MM THK)
11.	8T-4186 M	[12]	BOLT (M10X1.5X40-MM)
12.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
13.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
14.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	9X-2041 M	[19]	SCREW-TRUSS HEAD (M10X1.5X20-MM)
16.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
966H and 972H Wheel Loaders

Battery Disconnect Switch
966H and 972H Wheel Loaders

Fuses - Replace
966H and 972H Wheel Loaders

Circuit Breakers - Reset
966H and 972H Wheel Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Replacing Command Control Steering Harness "CCS" on H Series Machine Systems{1408, 4309, 4310, 4338, 4343}
Procedure for Replacing Command Control Steering Harness "CCS" on H Series Machine Systems{1408, 4309, 4310, 4338, 4343}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series H Medium Wheel Loaders {1408, 7000, 7490, 7606}
Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series H Medium Wheel Loaders {1408, 7000, 7490, 7606}

Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat^® Products {5063, 5705, 5734}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS ROUTING ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ENGINE HARNESS ROUTING ON CERTAIN 966H AND 972H WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SWITCH FOR THE SECONDARY STEERING ON CERTAIN IT62H INTEGRATED TOOLCARRIERS, 950H, 962H, 966H, AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SWITCH FOR THE SECONDARY STEERING ON CERTAIN IT62H INTEGRATED TOOLCARRIERS, 950H, 962H, 966H, AND 972H WHEEL LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Command Control Steering Harness Causing Open Circuit on Certain H-Series Medium Wheel Loaders {1408, 3171, 4309}
Command Control Steering Harness Causing Open Circuit on Certain H-Series Medium Wheel Loaders {1408, 3171, 4309}

Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Toggle Switch (Hood Tilt)
966H Wheel Loader and 972H
Wheel Loader Machine Systems

Relay (Secondary Steering Intermediate)
966H Wheel Loader and 972H
Wheel Loader Steering System

Electronic Unit Injector Wiring
C11 and C13 Engines

Temperature Sensor (Torque Converter Oil)
966H Wheel Loader and 972H
Wheel Loader Power Train

Pressure Switch (Primary Steering Oil) (Secondary Steering Oil)
966H Wheel Loader and 972H
Wheel Loader Steering System

Pressure Switch (Service Brake Oil)
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System

Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
966H Wheel Loader and 972H
Wheel Loader Power Train

Temperature Sensor (Hydraulic Oil)
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

Pressure Switch (Parking Brake Oil)
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System

Bypass Switch (Power Train Oil Filter)
966H Wheel Loader and 972H
Wheel Loader Power Train

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Senders
Caterpillar Monitoring System

Switches
Caterpillar Monitoring System

Sensors
Caterpillar Monitoring System

Action Lamp
Caterpillar Monitoring System

Action Alarm
Caterpillar Monitoring System

Switches
966H Wheel Loader and 972H
Wheel Loader Power Train

Start Relay
966H Wheel Loader and 972H
Wheel Loader Power Train

Switches
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

Sensors
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

Sensors
966H Wheel Loader and 972H
Wheel Loader Power Train

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Speed Sensor - Adjust
966H Wheel Loader and 972H
Wheel Loader Power Train

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Caterpillar Monitoring System

Wiring Harness (Open Circuit) - Test
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

Wiring Harness (Short Circuit) - Test
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

System Schematic
Machine Security System

Electrical Connector - Inspect
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Wiring Harness (Open Circuit) - Test
Caterpillar Monitoring System

Wiring Harness (Short Circuit) - Test
Caterpillar Monitoring System

System Schematic
966H Wheel Loader and 972H
Wheel Loader Power Train

System Schematic
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

Electrical Connector - Inspect
Machine Security System

System Schematic
Machine Security System (MSS3i) Integrated

System Schematic
MSS3s Machine Security System

Troubleshooting

MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System

Electrical Component and Connector Locations
Caterpillar Monitoring System

Switch Circuits
Caterpillar Monitoring System

Electrical Component and Connector Locations
Machine Security System

Connector Locations
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 081 - CID 0177 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0177 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0368 - FMI 02
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0368 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0444 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0444 - FMI 05
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0444 - FMI 06
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0627 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0627 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0794 - FMI 07
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0795 - FMI 07
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 1521 - FMI 02
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 1521 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

Connector Locations
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 082 - CID 0365 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

MID 082 - CID 0490 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

MID 082 - CID 0490 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

MID 082 - CID 1187 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

MID 082 - CID 1187 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System

MID 081 - CID 0793 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0793 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0794 - FMI 03
966H Wheel Loader and 972H
Wheel Loader Power Train

MID 081 - CID 0794 - FMI 04
966H Wheel Loader and 972H
Wheel Loader Power Train

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Fuel Transfer Pump - Test
C13 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Special Instructions for Replacing Command Control Steering Harnesses on Certain Compactors, Wheel Dozers, and Wheel Loaders Now Available. {1408, 4309, 4310, 4338, 4343}
2012/06/29

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

A New Implement Control Lever is Now Used on Certain Medium Wheel Loaders {5063}
2015/06/29

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat^® Products {5063, 5705, 5734}

Caterpillar Parts SIS Catalog 966H :

380-7699 WIRING GP-PROTECTION

306-5315 WIRING GP-CHASSIS

306-5317 WIRING GP-CAB

158-6634 SWITCH GP-TOGGLE

282-3426 LIGHTING GP-SIGNAL

282-3425 LIGHTING GP-SIGNAL

306-1721 LIGHTING GP-FLOOD & SIGNAL

280-1456 LIGHTING GP-FLOOD

380-7701 WIRING GP-PROTECTION

380-7703 WIRING GP-PROTECTION

380-7705 WIRING GP-PROTECTION

380-7707 WIRING GP-PROTECTION

380-7708 WIRING GP-PROTECTION

381-0185 WIRING GP-PROTECTION

231-6181 FILTER GP-OIL

308-8444 LINES GP-POWER TRAIN FILTER

Truck sale:

Caterpillar 966H
- Wheel Loaders
HOLT CAT

85,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
BOYD CAT COMPANY

95,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO

70,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.

322,210

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA