AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2G8660 FRONT AXLE GROUP--Top View--Part 1 of 2 Serial No. 61M4404, 4423, 4427, 4428, 4447, 4449, 4470, 4473, 4476, 4479 to 4484, 4487 to 4489, 4491, 4493 to 4496, 4500, 4501, 4503 to 4506, 4508, 4510, 4512 to 4514, 4517, 4519, 4521 to 4525, 4528 to 4530, 4532, 4535 to 4540, 4545, 4547 to 4557, 4559 to 4570, 4573, 4575, 4576 and 61M4578-Up 12G


FRAME AND BODY
AXLE GP
IMPLEMENTS
DRAWBAR GP
HYDRAULIC SYSTEM
DRIVE GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M02629-07710 (MACHINE) POWERED BY 3306 ENGINE SEBP1076 12G 61M   (1973)

FRAME AND BODY

AXLE GP
FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
 

#SEBP10760600
 

2G-8660: AXLE GP-FRONT

2G8660 FRONT AXLE GROUP--Top View--Part 1 of 2
Serial No. 61M4404, 4423, 4427, 4428, 4447, 4449, 4470, 4473, 4476, 4479 to 4484, 4487 to 4489, 4491, 4493 to 4496, 4500, 4501, 4503 to
4506, 4508, 4510, 4512 to 4514, 4517, 4519, 4521 to 4525, 4528 to 4530, 4532, 4535 to 4540, 4545, 4547 to 4557, 4559 to 4570, 4573, 4575,
4576 and 61M4578-Up
c227778 SEBP1076
2G8660 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [2] RETAINER  
2. 2G-8625 [1] PIN  
3. 5P-8842 C [8] SEAL  
4. 0S-1592 [2] BOLT  
  4D-3704 [2] WASHER  
5. 2G-8606 [1] AXLE ASSEM.  
6. 2G-8608 [4] BEARING  
7. 2G-8631 [4] BEARING  
8. 5P-8843 C [4] SEAL  
9. 9D-3523 [2] WASHER  
10. 8S-9191 [2] BOLT 102 mm (4 in.) long  
    -OR-
  0T-0065 C [2] BOLT 89 mm (3.5 in.) long  
11. 2G-8621 [1] PIN  
12. 2G-8599 [1] BAR ASSEM.  
13. 2G-8624 [2] BEARING  
14. 2G-8613 [1] PIN  
15. 2G-8727 [1] ARM ASSEM. (R.H.)  
    (Includes)
  2G-7388 [1] BEARING  
16. 2G-7387 [1] BEARING  
17. 2G-8596 [1] HOUSING (R.H.)  
18. 9D-6523 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
19. 8D-2811 [2] WASHER  
  3B-4618 [2] COTTER PIN  
20. 5D-6952 [2] CLAMP  
  1B-4367 [2] BOLT  
  3K-2889 [2] NUT  
21. 9D-6521 [1] ROD  
22. 9D-6524 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
23. 0L-1351 [4] BOLT  
  2G-8768 [4] WASHER  
24. 2G-8633 [2] PIN  
25. 1B-5174 [2] PLUG  
26. 2G-5673 B [1] WASHER  
    (use as required)
27. 2G-8617 [1] PIN  
28. 2G-8597 [1] HOUSING (L.H.)  
29. 3B-8489 [10] FITTING  
30. 5P-1075 [4] WASHER  
31. 2K-4973 [2] LOCKNUT  
  B   USE AS REQUIRED
  C   INDICATES CHANGE
 

#SEBP10760601
 

2G-8660: AXLE GP-FRONT

2G8660 FRONT AXLE GROUP--Sectional View of L.H. Housing--Part 2 of 2
Serial No. 61M4404, 4423, 4427, 4428, 4447, 4449, 4470, 4473, 4476, 4479 to 4484, 4487 to 4489,
4491, 4493 to 4496, 4500, 4501, 4503 to 4506, 4508, 4510, 4512 to 4514, 4517, 4519, 4521 to 4525, 4528 to
4530, 4532, 4535 to 4540, 4545, 4547 to 4557, 4559 to 4570, 4573, 4575, 4576 and 61M4578-Up
c227779 SEBP1076
2G8660 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8643 [2] RETAINER  
  2G-3865 [2] SHIM  
2. 0L-1351 C [4] BOLT  
3. 5P-1075 C [4] WASHER  
4. 2G-8777 [4] SEAL  
  9M-2092 [4] SEAL-O-RING  
5. 2G-8615 [4] WASHER (plain)  
  2G-8626 [2] WASHER (grooved)  
6. 2G-8739 [4] RETAINER  
7. 5P-8081 [4] BOLT  
8. 1B-4367 [2] BOLT  
  4K-0367 [2] NUT  
  4D-3704 [2] WASHER  
9. 4D-0925 [2] LOCK  
10. 0S-1571 [4] BOLT  
11. 9D-9797 [2] LOCK  
12. 2G-8728 [1] ARM ASSEM. (L.H.)  
    (Includes)
  2G-7388 [1] BEARING  
13. 2G-7387 C [1] BEARING  
14. 1D-4629 [2] BOLT  
  2J-3505 [2] NUT  
  9H-1031 [2] WASHER  
15. 8D-2477 [2] COVER  
16. 5F-3144 [2] SEAL  
17. 7D-8637 [2] CUP  
  7D-8636 [2] CONE  
18. 0L-1329 [6] BOLT  
19. 2H-8829 [2] PLUG  
  1F-7178 [2] GASKET  
20. 030-0060 [2] CUP  
  030-0061 [2] CONE  
21. 8D-1831 [2] SPINDLE  
  7D-0053 [20] BOLT  
    -OR-
  2G-7681 [2] SPINDLE  
  6V-1319 C [20] STUD  
22. 5P-8890 C [2] SEAL  
23. 5K-5288 R [2] SEAL GROUP  
    (Includes)
  5K-5129 [2] RING  
24. 3B-8489 [4] FITTING  
25. 2G-8741 [4] SEAL RING  
26. 2G-8742 [2] WASHER  
27. 2S-0115 [2] WASHER  
28. 2G-8629 [4] PIN  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10760602
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 1 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 331 & 332
2G5540 Camdrive parts are shown on Pages 236 & 237. AN ATTACHMENT
c228188 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5551 C [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
2. 8F-9836 [6] BAR  
3. 6J-0499 [2] BOSS  
4. 2G-6741 [12] PLATE  
5. 2G-2411 [3] BALLSTUD ASSEM.  
6. 9M-6527 C [4] WASHER  
7. 2G-5458 C [1] PLATE ASSEM.  
8. 3B-8489 [6] FITTING  
9. 3B-6753 [5] BOLT  
10. 3B-4512 [2] LOCKWASHER  
11. 6K-1330 C [13] BOLT  
12. 1K-6870 [13] NUT  
13. 2S-0115 C [16] WASHER  
14. 5D-4165 [2] SHOE  
  7D-0083 C [8] SHIM .2540 mm(.010 in.) thick  
  7D-0084 C [20] SHIM .7620 mm(.030 in.) thick  
15. 2G-5540 YC [1] CAMDRIVE GROUP  
    (Separate Illustration)
  9D-1568 [1] SPACER 10.46 cm(4.12 in.)long  
  9D-1571 SPACER 2.54 cm(1 in.) long  
16. 0S-1621 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
17. 2J-6540 [2] CLAMP  
18. 9D-2216 [1] HOSE  
19. 7D-8833 [1] NUT  
20. 9D-3289 [1] BOLT  
21. 2G-2858 C [1] CAP  
22. 4J-8622 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
23. 7D-8598 C [32] SHIM .2540 mm(.010 in.) thick  
  7D-8597 C [80] SHIM .7620 mm(.030 in.) thick  
24. 4B-3604 C [8] SETSCREW  
  1D-5119 [8] NUT  
25. 5D-0538 [4] SHOE  
26. 5P-4255 C [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760603
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 2 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 331 and 332
9D2475 Ball Resolver parts are shown on Page 239. AN ATTACHMENT
c228189 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] SCREW  
2. 0T-0431 [1] WASHER  
3. 9D-2281 [1] SPRING  
4. 6D-3893 [1] BEARING  
5. 9D-2256 [1] ROD ASSEM.  
    (Includes)
6. 4H-2809 [1] ROD END  
7. 6D-3908 [1] PIN  
  3B-4605 [1] COTTER PIN  
8. 8D-2799 [1] CHAIN ASSEM.  
9. 3D-0436 [2] SHIM 1.524 mm(.060 in.) thick  
  4D-3907 [1] SHIM .7620 mm(.030 in.) thick  
  6D-3133 [2] SHIM .2540 mm(.010 in.) thick  
  6D-3132 [2] SHIM .1270 mm(.005 in.) thick  
10. 4L-7124 [2] BOLT  
11. 2G-7464 C [3] INSERT  
12. 9D-2475 Y [1] RESOLVER GROUP  
    (Separate Illustration)
13. 8D-2804 [1] CLIP  
  8D-4333 [1] SCREW  
14. 5P-6331 C [3] SETSCREW  
15. 6D-3914 [1] PLATE  
  6D-3913 [1] RING  
16. 5P-6332 C [5] BOLT  
  3B-4501 [5] LOCKWASHER  
17. 6D-3898 [1] CLAMP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760604
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 1 of 2--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangement listed on Pages 331 and 332
2G5540 Camdrive parts are shown on Pages 236 and 237. AN ATTACHMENT
c228190 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5551 [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
2. 8F-9836 [6] BAR  
3. 6J-0499 [2] BOSS  
4. 2G-6741 [12] PLATE  
5. 2G-2411 [3] BALLSTUD ASSEM.  
6. 9M-6527 [4] WASHER  
7. 2G-5458 [1] PLATE ASSEM.  
8. 3B-8489 [6] FITTING  
9. 3B-6753 [5] BOLT  
10. 5P-6652 C [18] WASHER 6 mm(.236 in.)thick  
11. 1D-4616 C [13] BOLT  
12. 1K-6870 [13] NUT  
13. 2S-0115 C [13] WASHER 5 mm(.197 in.)thick  
14. 5D-4165 [2] SHOE  
  7D-0083 [8] SHIM .2540 mm(.010 in.) thick  
  7D-0084 [20] SHIM .7620 mm(.030 in.) thick  
15. 2G-5540 Y [1] CAMDRIVE GROUP  
    (Separate Illustration)
  9D-1568 [1] SPACER 10.46 cm(4.12 in.)long  
  9D-1571 SPACER 2.54 cm(1 in.) long  
16. 0S-1621 [3] BOLT  
  5P-1076 C [3] WASHER (conical)  
17. 2J-6540 [2] CLAMP  
18. 9D-2216 [1] HOSE  
19. 7D-8833 [1] NUT  
20. 9D-3289 [1] BOLT  
21. 2G-2858 [1] CAP  
22. 4J-8622 [4] BOLT  
  9H-1031 C [4] WASHER  
23. 7D-8598 [32] SHIM .2540 mm(.010 in.) thick  
  7D-8597 [80] SHIM .7620 mm(.030 in.) thick  
24. 4B-3604 [8] SETSCREW  
  1D-5119 [8] NUT  
25. 6G-2408 C [4] SHOE  
26. 5P-4255 [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760605
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 2 of 2--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 331 and 332
9D2475 Ball Resolver parts are shown on Page 239. AN ATTACHMENT
c228191 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] SCREW  
2. 0T-0431 [1] WASHER  
3. 9D-2281 [1] SPRING  
4. 6D-3893 [1] BEARING  
5. 9D-2256 [1] ROD ASSEM.  
    (Includes)
6. 4H-2809 [1] ROD END  
7. 6D-3908 [1] PIN  
  3B-4605 [1] COTTER PIN  
8. 8D-2799 [1] CHAIN ASSEM.  
9. 4D-3907 C [4] SHIM .7620 mm(030 in.)thick  
  6D-3133 C [6] SHIM .2540 mm(.010 in.)thick  
10. 2H-3764 C [2] BOLT  
11. 2G-7464 [3] INSERT  
12. 9D-2475 Y [1] RESOLVER GROUP  
    (Separate Illustration)
13. 8D-2804 [1] CLIP  
  8D-4333 [1] SCREW  
14. 5P-6331 [3] SETSCREW  
15. 6D-3914 [1] PLATE  
  6D-3913 [1] RING  
16. 5P-6332 [5] BOLT  
17. 6D-3898 [1] CLAMP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760606
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 1 of 2--Type 3
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 331 and 332
2G5540 Camdrive parts are shown on Pages 236 and 237. AN ATTACHMENT
c233126 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5551 [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
2. 8F-9836 [6] BAR  
3. 6J-0499 [2] BOSS  
4. 2G-6741 [12] PLATE  
5. 2G-2411 [3] BALLSTUD ASSEM.  
6. 6G-5404 [2] PLATE  
7. 2G-5458 [1] PLATE ASSEM.  
8. 3B-8489 [6] FITTING  
9. 3B-6753 [5] BOLT  
10. 5P-6652 [18] WASHER 6mm(.236 in.)thick  
11. 1D-4616 [13] BOLT  
12. 1K-6870 [13] NUT  
13. 2S-0115 [13] WASHER 5 mm(.197 in.)thick  
14. 6G-5393 C [2] SHOE  
  7D-0083 [8] SHIM .2540 mm(.010 in.)thick  
  7D-0084 [20] SHIM .7620 mm(.030 in.) thick  
15. 2G-5540 Y [1] CAMDRIVE GROUP  
    (Separate Illustration)
  9D-1568 [1] SPACER 10.46 cm(4.12 in.)long  
  9D-1571 [1] SPACER 2.54 cm(1 in.) long  
16. 0S-1621 [3] BOLT  
  5P-1076 C [3] WASHER (conical)  
17. 2J-6540 [2] CLAMP  
18. 9D-2216 [1] HOSE  
19. 7D-8833 [1] NUT  
20. 9D-3289 [1] BOLT  
21. 2G-2858 [1] CAP  
22. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER  
23. 7D-8598 [32] SHIM .2540 mm(.010 in.) thick  
  7D-8597 [80] SHIM .7620 mm(.030 in.) thick  
24. 4B-3604 C [12] SETSCREW  
  1D-5119 C [12] NUT  
25. 6G-2408 [4] SHOE  
26. 5P-4255 [4] BOLT  
27. 9M-6527 [4] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760607
 

9D-2400: DRAWBAR GP

9D2400 DRAWBAR GROUP--Part 2 of 2--Type 3
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 331 and 332
9D2475 Ball Resolver parts are shown on Page 239. AN ATTACHMENT
c233127 SEBP1076
9D2400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] SCREW  
2. 0T-0431 [1] WASHER  
3. 9D-2281 [1] SPRING  
4. 6D-3893 [1] BEARING  
5. 9D-2256 [1] ROD ASSEM.  
    (Includes)
6. 4H-2809 [1] ROD END  
7. 6D-3908 [1] PIN  
  3B-4605 [1] COTTER PIN  
8. 8D-2799 [1] CHAIN ASSEM.  
9. 4D-3907 [4] SHIM .7620 mm(030 in.)thick  
  6D-3133 [6] SHIM .2540 mm(.010 in.)thick  
10. 2H-3764 [2] BOLT  
11. 2G-7464 [3] INSERT  
12. 9D-2475 Y [1] RESOLVER GROUP  
    (Separate Illustration)
13. 8D-2804 [1] CLIP  
  8D-4333 [1] SCREW  
14. 5P-6331 [3] SETSCREW  
15. 6D-3914 [1] PLATE  
  6D-3913 [1] RING  
16. 5P-6332 [5] BOLT  
17. 6D-3898 [1] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760608
 

2G-5540: CAMDRIVE GROUP

2G5540 CAMDRIVE GROUP--Part 1 of 2
Part of 9D2400 Drawbar Group shown on Page 234
c157531 SEBP1076
2G5540 CAMDRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-1591 [1] CAGE  
2. 0S-1617 [3] BOLT  
3. 3B-4505 [11] LOCKWASHER  
4. 3B-2037 [1] LOCKNUT  
5. 6D-3856 [1] SPACER  
6. 6D-3880 [1] SETSCREW  
7. 9D-7943 [1] GEAR (32 teeth)  
8. 0S-1618 [6] BOLT  
9. 1B-7182 [2] BOLT  
10. 6D-3878 [1] COVER  
11. 6D-3879 [1] GASKET  
12. 2B-7410 [1] PLUG  
13. 3B-2036 [1] LOCKWASHER  
14. 9D-2214 [1] SHAFT  
15. 8S-7271 [1] SETSCREW  
  [1] NUT  
  6L-9447 [1] WASHER  
16. 3J-5390 [1] PLUG  
17. 6D-3890 [1] COVER  
18. 6D-3891 [1] GASKET  
19. 6D-3846 [1] SCREW  
  6D-3848 [1] WASHER  
20. 6D-3872 [1] WORM  
  1B-8704 [1] KEY  
21. 6D-3859 [1] SPACER  
22. 6D-3857 [2] BEARING  
23. 5F-8000 [1] SEAL  
24. 4L-8018 [2] BEARING  
25. 2H-5021 [1] SEAL  
26. 9D-7942 [1] SHAFT  
27. 1B-8708 [1] KEY  
 

#SEBP10760609
 

2G-5540: CAMDRIVE GROUP

2G5540 CAMDRIVE GROUP--Part 2 of 2
Part of 9D2400 Drawbar Group shown on Page 234
c157532 SEBP1076
2G5540 CAMDRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-7446 [1] SHAFT  
2. 6D-3891 [1] GASKET  
3. 2G-5489 [1] COVER  
4. 0S-1618 [6] BOLT  
  3B-4505 [6] LOCKWASHER  
5. 6D-3846 [1] SCREW  
  6D-3848 [1] WASHER  
6. 6D-3852 [2] BEARING  
7. 8D-2798 [1] CAM  
8. 7D-7444 [1] YOKE ASSEM.  
    (Includes)
9. 6D-3886 [1] BALL BEARING  
10. 4B-4276 [2] WASHER  
11. 6D-3902 [1] DOWEL  
12. 6D-3880 [1] SETSCREW  
13. 4F-4584 [1] SEAL  
14. 2G-5507 [1] SHAFT ASSEM.  
    (Includes)
15. 6D-3888 [1] DOWEL  
16. 6D-3889 [1] BEARING  
17. 9D-1333 [1] HOUSING  
18. 6D-3883 [1] GEAR (24 teeth)  
19. 7D-5469 [1] SETSCREW  
20. 2G-5497 [1] COVER  
  6D-3877 [1] GASKET  
21. 6D-2171 [1] SPACER  
22. 7D-7453 [1] SETSCREW  
23. 010-2571 [1] SETSCREW  
24. 3J-5390 [1] PLUG  
25. 5F-5434 [1] VENT ASSEM.  
26. 8B-1931 [1] BUSHING  
 

Information:

Caterpillar Parts SIS Catalog 12G :

8D-2980 FRONT AXLE GROUP
FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
CIRCLE ASSEMBLY
9D-2977 CIRCLE ASSEMBLY
CIRCLE AS
6G-2944 CIRCLE AS
CIRCLE AND BEAM ASSEMBLY
2G-3976 CIRCLE AND BEAM ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3976 CIRCLE AND BEAM ASSEMBLY
2G-8660 AXLE GP-FRONT
DRAWBAR GP
9D-2400 DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR GP
9D-2400 DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR GP
9D-2400 DRAWBAR GP
9D-2400 DRAWBAR GP
CAMDRIVE GROUP
2G-5540 CAMDRIVE GROUP

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.