AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1P3610 THIRD VALVE LINES GROUP Part of 3P1214 and 3P8589 Hydraulic Control Arrangements listed on Pages 133 and 135 D6C


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
CYLINDER GP
LINES GP-PUMP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
HYDRAULIC SYSTEM
LINES GP-REAR
OPERATOR STATION
CONTROL GP-HYDRAULIC

TRACK-TYPE TRACTOR D6C TRACK-TYPE TRACTOR 17R
 D6C TRACTOR--SPECIAL APPLICATION 17R01284-UP (MACHINE) SEBP1084 D6C 17R   (1970)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
THIRD VALVE LINES GROUP
1P-3610 THIRD VALVE LINES GROUP
 

#SEBP10840210
 

1P-3610: THIRD VALVE LINES GROUP

1P3610 THIRD VALVE LINES GROUP
Part of 3P1214 and 3P8589 Hydraulic Control Arrangements
listed on Pages 133 and 135
c143197 SEBP1084
1P3610 THIRD VALVE LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0001 C [1] HOSE ASSEM.  
  9S-0671 H HOSE 42.90 in.  
2. 8S-4055 [1] COUPLING ASSEM.  
3. 3S-8606 [2] SLEEVE  
4. 1P-8408 [1] COUPLING ASSEM.  
5. 6D-1641 [1] CLIP  
6. 8M-0505 [2] CONNECTOR  
7. 3K-0360 [4] SEAL  
8. 9S-4949 C [1] HOSE ASSEM.  
  9S-0671 H HOSE 41.40 in.  
9. 8S-6391 [1] COUPLING ASSEM.  
10. 3S-8606 [2] SLEEVE  
11. 8S-4055 [1] COUPLING ASSEM.  
12. 7F-2050 [2] NUT  
  2H-3922 [2] LOCKWASHER  
13. 9S-4185 [2] PLUG  
14. 1P-8335 [2] CONNECTOR  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP10840211
 

7J-7974: CYLINDER GP-LIFT

7J7974 CYLINDER GROUP--2 Required
FOR USE WITH OTHER THAN CATERPILLAR BUILT TOOL BARS
Note: 6P6095 Cylinder Arrangement consisting of: 2--7J7974 Cylinder Group is available
c209994 SEBP1084
7J7974 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 7J-7975 R [1] CYLINDER ASSEM.  
3. 5H-9394 [1] BOSS  
    (Part of 7J7975 Assem.)
4. 1H-8128 [1] SEAL  
5. 8J-5912 C [1] SCREW  
6. 2K-6830 [1] RING  
7. 7J-7983 [1] HEAD  
8. 4J-8979 [1] SEAL  
9. 7J-7977 R [1] ROD ASSEM.  
10. 7J-7984 [1] CROWN  
11. 5J-8150 [1] SEAL  
12. 6J-9733 [1] SEAL  
13. 7J-6084 [1] PISTON  
14. 5J-5402 [1] SEAL ASSEM.  
15. 5J-7154 [1] RING  
16. 8J-7415 C [1] WASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10840212
 

3P-1215: PUMP AND FILTER LINES GROUP

3P1215 PUMP AND FILTER LINES GROUP
Part of 3P1214, 3P1212, 3P8585 and 3P8589 Hydraulic Control Arrangements listed on Pages
133, 134 and 135. 7L6925 Filter parts are shown on Page 141
c209998 SEBP1084
3P1215 PUMP AND FILTER LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-5318 [1] CONNECTOR  
2. 3P-1061 [1] HOSE ASSEM. 1.78 m(70 in.)  
3. 1P-3354 [1] BRACKET ASSEM.  
  9F-2978 [3] NUT  
4. 0S-1588 [1] BOLT  
5. 3B-4506 [11] LOCKWASHER  
6. 4D-7388 [3] CLIP  
7. 1P-3355 [1] HOSE ASSEM.  
  5P-0180 CH HOSE 298.7 cm(117.6 in.)  
8. 3S-7166 [2] SLEEVE  
9. 8S-6389 [2] STEM ASSEM.  
10. 4S-6680 [1] CONNECTOR  
  7M-8485 [1] O-RING  
11. 6K-3460 [1] CONNECTOR  
12. 1N-6002 [1] O-RING  
13. 0L-1351 [4] BOLT  
14. 4B-4278 [3] WASHER  
15. 7D-1553 [1] CLIP  
16. 1A-2029 [2] BOLT  
17. 1D-4717 [4] NUT  
18. 6K-3879 [1] ELBOW  
19. 1P-3589 [1] TUBE ASSEM.  
20. 5H-0275 [1] NUT  
  5H-0273 [1] SLEEVE  
21. 030-8196 C [1] CONNECTOR  
  2M-9780 [1] O-RING  
22. 7H-1442 [2] CLAMP  
23. 0S-1590 [1] BOLT  
24. 1P-3619 [1] VALVE ASSEM.  
25. 3K-0360 [1] SEAL  
26. 9S-4187 [1] PLUG  
27. 5F-5523 [1] SPRING  
28. 9M-8805 [1] PLUNGER  
29. 7L-6925 Y [1] FILTER ASSEM.  
    (Separate Illustration)
30. 1P-3715 [1] HOSE  
31. 1P-3616 [1] COVER ASSEM.  
32. 8M-5254 [2] O-RING  
33. 1P-3611 [1] ANGLE ASSEM.  
  9F-2978 [3] NUT  
34. 0L-2070 [3] BOLT  
35. 1P-3615 [1] HOSE  
36. 2S-3440 C [2] CLAMP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10840213
 

7L-6925: FILTER AS-OIL

7L6925 OIL FILTER ASSEMBLY
Part of 3P1215 Pump and Filter Lines Group shown on Page 140
c135102 SEBP1084
7L6925 FILTER AS-OIL Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-0484 [ 1] ELEMENT ASSEM.  
2. 2M-8691 [ 1] GASKET  
3. 3H-4970 [ 1] SEAL  
4. 1K-0505 [ 1] WASHER  
5. 2N-8016 [ 1] BASE  
6. 7S-6636 [ 1] SCREW  
7. 5H-9899 [ 1] RING  
8. 5S-7128 [ 1] CASE ASSEM.  
9. 2J-6356 [ 1] RING  
10. 7S-6746 [ 1] SPRING  
11. 2H-8829 [ 1] PLUG  
  6F-7062 [ 1] GASKET  
12. 7S-6745 [ 1] RETAINER  
 

#SEBP10840214
 

1P-3609: TWO REAR IMPLEMENT LINES GROUP

1P3609 TWO REAR IMPLEMENT LINES GROUP
Part of 3P1214 and 3P1212 Hydraulic Control Arrangements listed on Pages 133 and 134
c133064 SEBP1084
1P3609 TWO REAR IMPLEMENT LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4185 [4] PLUG  
2. 3K-0360 [8] SEAL  
3. 1P-8335 [4] CONNECTOR  
4. 7F-2050 [4] NUT  
  2H-3922 [4] LOCKWASHER  
  2P-0001 [2] HOSE ASSEM.  
5. 8S-4055 [1] COUPLING ASSEM.  
6. 3S-8606 [2] SLEEVE  
7. 9S-0671 H HOSE 42.90"  
    (Angle Orientation 0 Degrees)
8. 1P-8408 [1] COUPLING ASSEM. (90 degrees)  
9. 0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4B-4278 [2] WASHER  
10. 7S-3916 [2] CLIP (Tab)  
  7S-3919 [2] CLIP (Slot)  
11. 8M-0505 [4] CONNECTOR  
  9S-4949 [2] HOSE ASSEM.  
12. 8S-6391 [1] COUPLING ASSEM. (90 degrees)  
13. 3S-8606 [2] SLEEVE  
14. 9S-0671 H HOSE 41.40"  
    (Angle orientation 0 Degrees)
15. 8S-4055 [1] COUPLING ASSEM.  
16. 6D-1641 [1] CLIP  
  1P-7913 [1] FILM  
  H   ORDER BY THE INCH
 

#SEBP10840215
 

1P-3608: TOOL BAR AND ONE REAR IMPLEMENT LINES GROUP

1P3608 TOOL BAR AND ONE REAR IMPLEMENT LINES GROUP
Part of 3P8585 and 3P8589 Hydraulic Control Arrangements listed on Pages 134 and 135
c209997 SEBP1084
1P3608 TOOL BAR AND ONE REAR IMPLEMENT LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3600 [1] BLOCK  
2. 8M-0505 [14] CONNECTOR  
3. 3K-0360 [26] SEAL  
4. 1P-8365 [2] PLUG  
5. 1P-8364 [2] CAP  
6. 1P-3658 [2] HOSE ASSEM.  
  5P-0179 CH HOSE 279.4 cm(110 in.)  
    (139.7 cm-55 in. in each 1P3658 Assem.)
7. 8S-7092 [4] STEM ASSEM. (Straight)  
8. 3S-8606 [8] SLEEVE  
9. 9S-9727 [4] STEM ASSEM. (45 degrees)  
    (One fourth each in 1P3658 & 1P3656 Assem.)
10. 7K-0613 [4] COUPLING ASSEM.  
11. 1A-2029 [4] BOLT  
12. 3B-4506 [6] LOCKWASHER  
  4B-4278 [6] WASHER  
13. 1P-8335 [2] CONNECTOR  
  9S-4185 [2] PLUG  
14. 7F-2050 [2] NUT  
  2H-3922 [2] LOCKWASHER  
15. 2P-0001 C [1] HOSE ASSEM.  
  5P-0179 CH HOSE 108.97 cm(42.9 in.)  
16. 3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
17. 1P-8408 [1] COUPLING ASSEM. (90 degrees)  
18. 9S-4949 C [1] HOSE ASSEM.  
  5P-0179 CH HOSE 105.16 cm(41.4 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
19. 3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
20. 1P-3630 [1] HOSE ASSEM.  
  5P-0179 CH HOSE 134.62 cm(53 in.)  
21. 1P-8408 [1] COUPLING ASSEM. (90 degrees) long  
22. 3S-8606 [2] SLEEVE  
23. 8S-6391 [1] COUPLING ASSEM. (90 degrees) short  
24. 1P-3631 [1] HOSE ASSEM.  
  5P-0179 CH HOSE 140.72 cm(55.40 in.)  
25. 3S-8606 [2] SLEEVE  
26. 8S-6391 [2] COUPLING ASSEM.  
27. 7B-3235 [1] BOLT  
  1D-4719 [1] NUT  
28. 3B-4508 [3] LOCKWASHER  
  4B-4280 [5] WASHER  
29. 1P-3591 [1] BRACKET  
30. 6D-1641 [4] CLIP  
31. 0S-1594 [1] BOLT  
  1D-4717 [1] NUT  
32. 1P-3654 [2] TUBE ASSEM.  
33. 6K-1185 [1] CLIP  
34. 0S-1595 [2] BOLT  
35. 1P-3656 H [2] HOSE ASSEM.  
  5P-0179 HOSE 248.92 cm(98 in.)  
    (129.46 cm in each 1P3656 Assem.)
36. 4D-0354 [2] FITTING  
  3K-0360 [1] SEAL  
37. 9S-1690 C [2] HOSE ASSEM.  
  5P-0179 H HOSE 97.71 cm(38.47 in.)  
38. 3S-8606 [2] SLEEVE  
39. 8S-4055 [2] STEM ASSEM.  
40. 1P-3648 [1] BLOCK  
41. 0S-1588 [1] BOLT  
  1P-7913 [1] FILM (instruction)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#SEBP10840216
 

1P-3606: CONTROLS AND MOUNTING GROUP

1P3606 CONTROLS AND MOUNTING GROUP--Type 1
Part of 3P1212 and 3P8585 Hydraulic Control Arrangements
listed on Page 134
c164074 SEBP1084
1P3606 CONTROLS AND MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4133 [1] PIN  
2. 3B-4609 [2] COTTER PIN  
3. 1P-3587 [1] PLATE ASSEM.  
4. 2K-7979 [2] BEARING  
    (Part of 1P3587 Assem.)
5. 1D-5117 [2] NUT  
6. 1P-7615 [1] ROD  
7. 7F-8092 [1] KNOB  
8. 1P-7616 [1] ROD  
9. 1P-3330 [2] LEVER ASSEM.  
  2K-7979 [4] BEARING  
    (2 in each 1P3330 Assem.)
10. 8B-6756 [1] BUSHING  
11. 0S-0509 [13] BOLT  
12. 3B-4506 [11] LOCKWASHER  
13. 1P-3331 [2] BLOCK  
14. 5B-0448 [1] SCREW  
15. 1P-3333 [1] SHAFT  
16. 1P-3651 [2] ORIFICE  
17. 2N-1287 [1] ELBOW  
18. 8B-3768 [1] YOKE END  
  [1] NUT  
19. 8P-3039 C [1] HOSE ASSEM.  
20. 1P-3317 [4] LINK  
21. 1P-3321 [4] PIN  
  3B-4604 [4] COTTER PIN  
  4B-4274 [4] WASHER  
22. 0S-1621 [3] BOLT  
  3J-4818 [3] LOCKWASHER  
  0V-0531 [3] WASHER  
23. 4B-3057 [1] PIN  
24. 1P-3621 [1] BRACKET ASSEM.  
25. 1B-2578 [2] NUT  
  9F-5644 [2] LOCKWASHER  
26. 8D-0071 [1] TEE  
27. 1P-3641 [1] SUPPORT ASSEM.  
28. 1F-0748 [3] NUT  
29. 9F-2978 [5] NUT  
    (Parts of 1P3641 Assem.)
30. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
31. 8B-2283 [1] NIPPLE  
32. 4M-5317 [1] BUSHING  
33. 1P-3696 [1] COVER ASSEM.  
34. 1P-3649 [1] VALVE ASSEM.  
  033-6039 C [1] SEAL  
  030-6121 C [1] RING  
    (Parts of 1P3649 Assem.)
35. 1P-3647 [1] COVER  
36. 0L-1170 C [1] HANDLE  
37. 8P-3082 C [1] CYLINDER ASSEM.  
38. 8P-3038 C [1] HOSE ASSEM.  
  1P-7907 [1] FILM (warning)  
  C   INDICATES CHANGE
 

#SEBP10840217
 

1P-3606: CONTROLS AND MOUNTING GROUP

1P3606 CONTROLS AND MOUNTING GROUP--Type 2
Part of 3P1212 and 3P8585 Hydraulic Control Arrangements
listed on Page 134
c164075 SEBP1084
1P3606 CONTROLS AND MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4133 [1] PIN  
2. 3B-4510 C [1] COTTER PIN  
3. 1P-3587 [1] PLATE ASSEM.  
    (Includes)
4. 2K-7979 [2] BEARING  
5. 1D-5117 [2] NUT  
6. 1P-7615 [1] ROD  
7. 7F-8092 [1] KNOB  
8. 1P-7616 [1] ROD  
9. 1P-3330 [2] LEVER ASSEM.  
    (Each Includes)
  2K-7979 [2] BEARING  
10. 8B-6756 [1] BUSHING  
11. 0S-0509 [13] BOLT  
12. 3B-4506 [11] LOCKWASHER  
13. 1P-3331 [2] BLOCK  
14. 5B-0448 [1] SCREW  
15. 1P-3333 [1] SHAFT  
16. 1P-3651 [2] ORIFICE  
17. 2N-1287 C [2] ELBOW  
18. 4F-1001 C [1] YOKE END  
  9S-8751 C [1] NUT  
19. 8P-3039 C [2] HOSE ASSEM.  
20. 1P-3317 [4] LINK  
21. 1P-3321 [4] PIN  
  3B-4605 C [4] COTTER PIN  
  4B-4274 [4] WASHER  
22. 0S-1621 [3] BOLT  
  3J-4818 [3] LOCKWASHER  
  0V-0531 [3] WASHER  
23. 1A-2457 C [1] PIN  
  3B-4611 C [1] COTTER PIN  
24. 8P-9421 C [1] BRACKET ASSEM.  
25. 1B-2578 [2] NUT  
  9F-5644 [2] LOCKWASHER  
26. 8D-0071 [1] TEE  
27. 1P-3641 [1] SUPPORT ASSEM.  
    (Includes)
28. 1F-0748 [3] NUT  
29. 9F-2978 [5] NUT  
30. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
31. 8B-2283 [1] NIPPLE  
32. 4M-5317 [1] BUSHING  
33. 1P-3696 [1] COVER ASSEM.  
34. 1P-3649 [1] VALVE ASSEM.  
    (Includes)
  033-6039 C [1] SEAL  
  030-6121 C [1] RING  
35. 1P-3647 [1] COVER  
36. 0L-1170 [1] HANDLE  
37. 8P-8959 C [1] CYLINDER  
38. 8P-3038 [1] HOSE ASSEM.  
39. 3B-6768 C [1] BUSHING  
40. 7J-8611 C [1] ELBOW  
41. 2D-7325 C [1] TEE  
42. 8L-6557 C [1] CONNECTOR  
  1P-7907 J [1] FILM (warning)  
  C   INDICATES CHANGE
  J   NOT SHOWN
 

#SEBP10840218
 

1P-3607: CONTROL AND MOUNTING GROUP

1P3607 CONTROL AND MOUNTING GROUP--3 Valve--Type 2
Part of 3P1214 and 3P8589 Hydraulic Control Arrangements
listed on Pages 133 and 135
c164079 SEBP1084
1P3607 CONTROL AND MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4133 [1] PIN  
2. 3B-4610 C [1] COTTER PIN  
3. 1P-3587 [1] PLATE ASSEM.  
    (Includes)
4. 2K-7979 [2] BEARING  
5. 1D-5117 [3] NUT  
6. 1P-7615 [2] ROD  
7. 7F-8092 [2] KNOB  
8. 1P-7616 [1] ROD  
9. 1P-3330 [3] LEVER ASSEM.  
    (Each Includes)
  2K-7979 [2] BEARING  
10. 4F-1001 C [1] YOKE END  
11. 0S-0509 [13] BOLT  
12. 3B-4506 [11] LOCKWASHER  
13. 1P-3331 [2] BLOCK  
14. 5B-0448 [1] SCREW  
15. 1P-3333 [1] SHAFT  
16. 1P-3651 [2] ORIFICE  
17. 2N-1287 C [2] ELBOW  
18. 9S-8751 C [1] NUT  
19. 8P-3039 C [2] HOSE ASSEM. .53 m(21.02 in.)  
20. 1P-3317 [6] LINK  
21. 1P-3321 [6] PIN  
  3B-4605 C [6] COTTER PIN  
  4B-4274 [6] WASHER  
22. 0S-1621 [3] BOLT  
23. 1A-2457 [1] PIN  
24. 8P-9421 [1] BRACKET ASSEM.  
25. 9F-5644 [2] LOCKWASHER  
  1B-2578 [2] NUT  
26. 8D-0071 [1] TEE  
27. 1P-3641 [1] SUPPORT ASSEM.  
    (Includes)
28. 1F-0748 [3] NUT  
29. 9F-2978 [5] NUT  
30. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
31. 8B-2283 [1] NIPPLE  
32. 4M-5317 [1] BUSHING  
33. 1P-3696 [1] COVER ASSEM.  
34. 1P-3649 [1] VALVE ASSEM. (relief)  
    (Includes)
  033-6039 C [1] SEAL  
  030-6121 C [1] RING  
35. 1P-3647 [1] COVER  
36. 0L-1170 [1] HANDLE  
37. 8P-8959 C [1] CYLINDER  
38. 8P-3038 [1] HOSE ASSEM. .33 m(13 in.)  
39. 3B-6768 C [1] BUSHING  
40. 3B-4611 C [1] COTTER PIN  
41. 7J-8611 C [1] ELBOW  
42. 2D-7325 C [1] TEE  
43. 8L-6557 C [1] CONNECTOR  
44. 3J-4818 [3] LOCKWASHER  
  0V-0531 [3] WASHER  
  1P-7907 J [1] FILM (warning)  
  C   INDICATES CHANGE
  J   NOT SHOWN
 

#SEBP10840219
 

1P-3607: CONTROL AND MOUNTING GROUP

1P3607 CONTROL AND MOUNTING GROUP--3 Valve--Type 1
Part of 3P1214 and 3P8589 Hydraulic Control Arrangements
listed on Pages 133 and 135
c164078 SEBP1084
1P3607 CONTROL AND MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4133 [1] PIN  
2. 3B-4609 [2] COTTER PIN  
3. 1P-3587 [1] PLATE ASSEM.  
4. 2K-7979 [2] BEARING  
    (Part of 1P3587 Assem.)
5. 1D-5117 [3] NUT  
6. 1P-7615 [2] ROD  
7. 7F-8092 [2] KNOB  
8. 1P-7616 [1] ROD  
9. 1P-3330 [3] LEVER ASSEM.  
  2K-7979 [6] BEARING  
    (2 in each 1P3330 Assem.)
10. 8B-3768 [1] YOKE END  
11. 0S-0509 [13] BOLT  
12. 3B-4506 [11] LOCKWASHER  
13. 1P-3331 [2] BLOCK  
14. 5B-0448 [1] SCREW  
15. 1P-3333 [1] SHAFT  
16. 1P-3651 [2] ORIFICE  
17. 2N-1287 [1] ELBOW  
18. 2D-2144 [1] NUT  
19. 8P-3039 C [1] HOSE ASSEM. .53 m(21.02 in.)  
20. 1P-3317 [6] LINK  
21. 1P-3321 [6] PIN  
  3B-4604 [6] COTTER PIN  
  4B-4274 [6] WASHER  
22. 0S-1621 [3] BOLT  
  3J-4818 [3] LOCKWASHER  
  0V-0531 [3] WASHER  
23. 4B-3057 [1] PIN  
24. 1P-3621 [1] BRACKET ASSEM.  
25. 9F-5644 [2] LOCKWASHER  
  1B-2578 [2] NUT  
26. 8D-0071 [1] TEE  
27. 1P-3641 [1] SUPPORT ASSEM.  
28. 1F-0748 [3] NUT  
29. 9F-2978 [5] NUT  
    (Parts of 1P3641 Assem.)
30. 0S-1595 [3] BOLT  
  3B-4508 [3] LOCKWASHER  
31. 8B-2283 [1] NIPPLE  
32. 4M-5317 [1] BUSHING  
33. 1P-3696 [1] COVER ASSEM.  
34. 1P-3649 [1] VALVE ASSEM.  
  033-6039 C [1] SEAL  
  030-6121 C [1] RING  
    (Parts of 1P3649 Assem.)
35. 1P-3647 [1] COVER  
36. 0L-1170 C [1] HANDLE  
37. 8P-3082 [1] CYLINDER ASSEM.  
38. 8P-3038 C [1] HOSE ASSEM. .33 m(13 in.)  
  1P-7907 [1] FILM (warning)  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog D6C :

CONTROL VALVE GROUP
8J-1947 CONTROL VALVE GROUP
CONTROL VALVE GROUP
8J-1946 CONTROL VALVE GROUP
VALVE GP-CONTROL
3G-3446 VALVE GP-CONTROL
VALVE GP-CONTROL
3G-3447 VALVE GP-CONTROL
VALVE GP-BANK-2
3G-3142 VALVE GP-BANK-2
VALVE GROUP
3G-3143 VALVE GROUP
VALVE GROUP
7J-8123 VALVE GROUP
VALVE GROUP
7J-8122 VALVE GROUP
CYLINDER GP-LIFT
7J-7974 CYLINDER GP-LIFT
PUMP AND FILTER LINES GROUP
3P-1215 PUMP AND FILTER LINES GROUP
FILTER AS-OIL
7L-6925 FILTER AS-OIL
TWO REAR IMPLEMENT LINES GROUP
1P-3609 TWO REAR IMPLEMENT LINES GROUP
TOOL BAR AND ONE REAR IMPLEMENT LINES GROUP
1P-3608 TOOL BAR AND ONE REAR IMPLEMENT LINES GROUP
CONTROLS AND MOUNTING GROUP
1P-3606 CONTROLS AND MOUNTING GROUP
CONTROLS AND MOUNTING GROUP
1P-3606 CONTROLS AND MOUNTING GROUP
CONTROL AND MOUNTING GROUP
1P-3607 CONTROL AND MOUNTING GROUP

Truck sale:

Caterpillar D6C
 
Caterpillar D6C
- Crawler dozers
QUINN COMPANY
 
22.000 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


 
25.522 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D6C, Crawler dozers, Construction
19,500 
Caterpillar D6C, Crawler dozers, Construction
- Crawler dozers
PETERSON CAT
Caterpillar D6C, Construction
13,900 USD 
Caterpillar D6C, Construction
- Crawler dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.