STEERING SYSTEM
PUMP GPPUMP GP-METERING
STEERING COLUMN GP
LINES GP
STEERING SYSTEM
PUMP GP
#SEBP13770690
3G-2753: PUMP GP-GEAR
3G-2753 PUMP GP-GEAR -SECONDARY STEERING
S/N 49Z1-99999
PART OF 1V-5965 LINES GP-SECONDARY STEERING
Type 1
S/N 49Z1-99999
PART OF 1V-5965 LINES GP-SECONDARY STEERING
Type 1
For full view, you need register
Parts for your 992C WHEEL LOADER:
#SEBP13770691
3G-2753: PUMP GP-GEAR
3G-2753 PUMP GP-GEAR -SECONDARY STEERING
S/N 49Z1-99999
PART OF 1V-5965 LINES GP-SECONDARY STEERING
Type 2
S/N 49Z1-99999
PART OF 1V-5965 LINES GP-SECONDARY STEERING
Type 2
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-3660 C | [1] | SHAFT-DRIVE | |
| 2. | 6V-1899 C | [2] | SEAL-LIP TYPE | |
| 3. | 008-3214 C | [1] | RING-RETAINING (INTERNAL) | |
| 4. | 3G-7242 | [1] | PLUG | |
| 5. | 9T-3427 C | [1] | BUSHING-TERMINAL | |
| 6. | 0S-1566 | [8] | BOLT (5/8-11X1.5-IN) | |
| 7. | 9T-4523 C | [1] | FLANGE AS | |
| 8. | 6J-2386 C | [2] | DOWEL | |
| 9. | 391-1396 C | [1] | PLATE-PRESSURE | |
| 10. | 9T-3428 C | [3] | BUSHING-TERMINAL | |
| 11. | 9T-3663 C | [1] | BODY AS | |
| 12. | 9T-3336 C | [1] | GEAR-IDLER | |
| 13. | 391-1394 C | [1] | PLATE-PRESSURE | |
| 14. | 4B-1550 | [8] | WASHER (1.6-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-6915 | [1] | KIT-SEAL | ||
| (INCLUDES STRIPS, SEALS, RINGS,& SEPARATORS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13770692
9J-6484: PUMP GP-GEAR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-9605 | [8] | STUD | |
| 1B-4206 | [8] | NUT (5/8-18-THD) | ||
| 4B-1550 | [8] | WASHER (1.6-MM THK) | ||
| 2. | 3G-1709 | [1] | COUPLING | |
| 3. | 5S-1522 | [1] | RING-SNAP | |
| 4. | 2M-8191 | [1] | RING-SNAP | |
| 5. | 3G-8460 | [2] | STUD | |
| 1D-4717 | [2] | NUT (3/8-16-THD) | ||
| 6. | 9T-2279 | [1] | COUPLING-SPLINE | |
| 7. | 7D-9749 | [1] | SEAL-O-RING | |
| 8. | 3G-7242 | [1] | PLUG | |
| 9. | 5P-9597 | [2] | SEAL-LIP TYPE | |
| 10. | 3G-7241 | [1] | SPACER | |
| 11. | 5P-4889 | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-6825 | [1] | KIT-SEAL (FRONT & CENTER SECTION) | ||
| 3G-6918 | [1] | KIT-FRONT SECTION | ||
| 3G-7236 | [1] | KIT-CENTER SECTION | ||
| 3G-6916 | [1] | SECTION AS-REAR | ||
| 3G-6888 | [1] | KIT-REAR SECTION SEAL | ||
#SEBP13770693
9T-3216: PUMP GP-GEAR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-9605 | [8] | STUD | |
| 1B-4205 | [8] | NUT (1/2-20-THD) | ||
| 4B-1550 | [8] | WASHER (1.6-MM THK) | ||
| 2. | 3G-1709 | [1] | COUPLING | |
| 3. | 5S-1522 | [1] | RING-SNAP | |
| 4. | 2M-8191 | [1] | RING-SNAP | |
| 5. | 3G-8460 | [2] | STUD | |
| 1D-4717 | [2] | NUT (3/8-16-THD) | ||
| 6. | 9T-2279 C | [1] | COUPLING-SPLINE | |
| 7. | 7D-9749 | [1] | SEAL-O-RING | |
| 8. | 5P-4889 | [1] | SEAL-O-RING | |
| 9. | 5P-9597 | [2] | SEAL-LIP TYPE | |
| 10. | 2D-6648 | [1] | RING-RETAINING | |
| 11. | 9T-3214 | [1] | FLANGE AS | |
| 12. | 9T-1437 | [1] | KIT-PLUG (HYDRAULIC PUMP) | |
| (INCLUDES PLUG & INSERT) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-6825 | [1] | KIT-SEAL (FRONT & CENTER SECTION) | ||
| 9T-3215 | [1] | KIT-FRONT SECTION | ||
| 3G-7236 | [1] | KIT-CENTER SECTION | ||
| 3G-6916 | [1] | SECTION AS-REAR | ||
| 3G-6888 | [1] | KIT-REAR SECTION SEAL | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13770694
9T-3216: PUMP GP-GEAR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-9605 | [8] | STUD | |
| 1B-4205 | [8] | NUT (1/2-20-THD) | ||
| 4B-1550 | [8] | WASHER (1.6-MM THK) | ||
| 2. | 3G-1709 | [1] | COUPLING | |
| 3. | 5S-1522 | [1] | RING-SNAP | |
| 4. | 2M-8191 | [1] | RING-SNAP | |
| 5. | 3G-8460 | [2] | STUD | |
| 3K-6060 C | [2] | LOCKNUT (3/8-16-THD) | ||
| 6V-8495 C | [2] | WASHER-HARD (10.5X21X2-MM THK) | ||
| 6. | 9T-2279 | [1] | COUPLING-SPLINE | |
| 7. | 7D-9749 | [1] | SEAL-O-RING | |
| 8. | 5P-4889 | [1] | SEAL-O-RING | |
| 9. | 5P-9597 | [2] | SEAL-LIP TYPE | |
| 10. | 2D-6648 | [1] | RING-RETAINING | |
| 11. | 9T-3214 | [1] | FLANGE AS | |
| 12. | 3G-7242 C | [1] | PLUG | |
| 13. | 9T-6892 C | [2] | GEAR-IDLER | |
| 14. | 9T-3428 C | [7] | BUSHING-TERMINAL | |
| 15. | 6J-2386 C | [6] | DOWEL | |
| 16. | 9T-3574 C | [4] | PLATE-PRESSURE | |
| 17. | 5J-2974 C | [16] | SEAL-O-RING | |
| 18. | 9T-4823 JC | [1] | PLATE AS | |
| 19. | 9T-6889 JC | [2] | BODY AS | |
| 20. | 9T-6891 C | [1] | GEAR-DRIVE | |
| 21. | 9T-6860 C | [1] | PLATE | |
| 22. | 9T-3339 C | [2] | PLATE-ISOLATION | |
| 23. | 9T-3338 C | [2] | PLATE-ISOLATION | |
| 24. | 9T-3427 C | [1] | BUSHING-TERMINAL | |
| 25. | 9T-6900 C | [1] | PLATE-ADAPTER | |
| 26. | 9T-6890 C | [1] | SHAFT | |
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-6825 | [1] | KIT-SEAL (FRONT & CENTER SECTION) | ||
| 9T-3215 | [1] | KIT-FRONT SECTION | ||
| 3G-7236 | [1] | KIT-CENTER SECTION | ||
| 3G-6916 | [1] | SECTION AS-REAR | ||
| 3G-6888 J | [1] | KIT-REAR SECTION SEAL | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | INCLUDES BUSHINGS | |||
#SEBP13770695
9T-7468: PUMP GP-GEAR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-9605 | [8] | STUD | |
| 1B-4206 | [8] | NUT (5/8-18-THD) | ||
| 4B-1550 | [8] | WASHER (1.6-MM THK) | ||
| 2. | 3G-1709 | [1] | COUPLING | |
| 3. | 5S-1522 | [1] | RING-SNAP | |
| 4. | 2M-8191 | [1] | RING-SNAP | |
| 5. | 3G-8460 | [2] | STUD | |
| 3K-6060 | [2] | LOCKNUT (3/8-16-THD) | ||
| 6V-8495 | [2] | WASHER-HARD (10.5X21X2-MM THK) | ||
| 6. | 9T-2279 | [1] | COUPLING-SPLINE | |
| 7. | 7D-9749 | [1] | SEAL-O-RING | |
| 8. | 5P-4889 | [1] | SEAL-O-RING | |
| 9. | 5P-9597 | [2] | SEAL-LIP TYPE | |
| 10. | 2D-6648 | [1] | RING-RETAINING | |
| 11. | 9T-8360 | [1] | FLANGE AS | |
| 12. | 3G-7242 | [1] | PLUG | |
| 13. | 9T-6892 | [2] | GEAR-IDLER | |
| 14. | 9T-3428 | [7] | BUSHING-TERMINAL | |
| 15. | 6J-2386 | [6] | DOWEL | |
| 16. | 9T-3574 | [4] | PLATE-PRESSURE | |
| 17. | 5J-2974 | [16] | SEAL-O-RING | |
| 18. | 9T-8359 J | [1] | PLATE AS | |
| 19. | 9T-8947 J | [2] | BODY AS | |
| 20. | 9T-6891 | [1] | GEAR-DRIVE | |
| 21. | 9T-8948 | [1] | PLATE | |
| 22. | 9T-3339 | [2] | PLATE-ISOLATION | |
| 23. | 9T-3338 | [2] | PLATE-ISOLATION | |
| 24. | 9T-3427 | [1] | BUSHING-TERMINAL | |
| 25. | 9T-6900 | [1] | PLATE-ADAPTER | |
| 26. | 9T-6890 | [1] | SHAFT | |
| 27. | 3G-6916 | [1] | SECTION AS-REAR (STEERING PUMP) | |
| (SERVICED ONLY AS A COMPLETE UNIT) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-6825 | [1] | KIT-SEAL | ||
| (FRONT & CENTER SECTION) | ||||
| 9T-8950 | [1] | KIT-FRONT SECTION | ||
| 9T-8951 | [1] | KIT-CENTER SECTION | ||
| 3G-6888 | [1] | KIT-REAR SECTION SEAL | ||
| J | INCLUDES BUSHINGS | |||
#SEBP13770696
3G-7595: PUMP GP-METERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8994 | [1] | BODY AS | |
| 2. | 7J-8010 | [6] | SPRING-CENTERING | |
| 3. | 7J-8009 | [1] | PIN | |
| 4. | 3G-6906 | [1] | SCREW (9/16-18X0.559-IN) | |
| 5. | 1H-1023 | [1] | SEAL-O-RING | |
| 6. | 3G-6907 | [1] | SEAT | |
| 7. | 5F-9144 | [1] | SEAL-O-RING | |
| 8. | 6S-7827 | [1] | BALL | |
| 9. | 6S-7826 | [1] | RETAINER-BALL | |
| 10. | 9J-5686 | [3] | SEAL-O-RING | |
| 11. | 9J-5443 | [7] | BOLT-HEAD | |
| 12. | 3G-3458 | [1] | SPACER (0.38X0.9X0.48-IN THK) | |
| 13. | 3G-6889 | [1] | CAP | |
| 14. | 3G-8997 | [1] | GEROTOR AS | |
| 15. | 3G-6905 | [1] | SPACER | |
| 16. | 7J-6839 | [1] | DRIVE-CONTROL END | |
| 17. | 3G-6891 | [2] | RACE | |
| 18. | 5L-1100 | [1] | BEARING-THRUST | |
| 19. | 7F-8267 | [1] | SEAL-O-RING | |
| 20. | 9J-5442 | [1] | RING-RETAINING | |
| 21. | 7J-6833 | [1] | SEAL | |
| 22. | 9J-8076 | [1] | BUSHING-TERMINAL | |
| 23. | 8F-5340 | [1] | SEAL-LIP TYPE |
#SEBP13770697
6E-2726: PUMP GP-METERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9J-8076 | [1] | BUSHING-TERMINAL | |
| 2. | 8F-5340 J | [1] | SEAL-LIP TYPE | |
| 3. | 7J-8009 | [1] | PIN | |
| 4. | 3G-6906 | [1] | SCREW (9/16-18X0.559-IN) | |
| 5. | 1H-1023 J | [1] | SEAL-O-RING | |
| 6. | 3G-6907 | [1] | SEAT | |
| 7. | 5F-9144 J | [1] | SEAL-O-RING | |
| 8. | 6S-7827 | [1] | BALL | |
| 9. | 6S-7826 | [1] | RETAINER-BALL | |
| 10. | 9J-5686 J | [3] | SEAL-O-RING | |
| 11. | 9J-5443 | [7] | BOLT-HEAD | |
| 12. | 3G-3458 | [1] | SPACER (0.38X0.9X0.48-IN THK) | |
| 13. | 3G-6889 | [1] | CAP | |
| 14. | 3G-8997 | [1] | GEROTOR AS | |
| 15. | 3G-6905 | [1] | SPACER | |
| 16. | 7J-6839 | [1] | DRIVE-CONTROL END | |
| 17. | 3G-6891 | [2] | RACE | |
| 18. | 5L-1100 | [1] | BEARING-THRUST | |
| 19. | 7F-8267 J | [1] | SEAL-O-RING | |
| 20. | 9J-5442 | [1] | RING-RETAINING | |
| 21. | 7J-6833 J | [1] | SEAL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 119-8119 | [1] | KIT-CONVERSION | ||
| (INCLUDES BOLTS, CAP & SPACER) | ||||
| 118-4341 J | [1] | KIT-SEAL (PUMP-METERING) | ||
| (INCLUDES INSTALLATION INSTRUCTIONS) | ||||
| 9T-8560 | [1] | KIT-SPRING (PUMP-METERING) | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP13770698
1V-4912: STEERING COLUMN GP-ADJUSTABLE
1V-4912 STEERING COLUMN GP-ADJUSTABLE
S/N 49Z1-99999
PART OF 7V-0011 OPERATOR AR
S/N 49Z1-99999
PART OF 7V-0011 OPERATOR AR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5L-4041 | [4] | BOLT-12 POINT HEAD (1/4-20X1.5-IN) | |
| 2. | 8R-7073 | [1] | CAP AS | |
| 6D-5974 | [1] | BEARING-ROLLER | ||
| 3. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4. | 5V-4714 C | [1] | BLOCK | |
| 5. | 2V-9166 | [2] | WASHER (0.391X1X0.06-IN THK) | |
| 2H-3429 | [2] | RING-RETAINING | ||
| 6. | 1P-3321 | [2] | PIN | |
| 3B-4605 | [2] | PIN-COTTER | ||
| 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | ||
| 7. | 5V-4713 C | [1] | PIN | |
| 8. | 1V-7323 | [1] | BELLCRANK AS | |
| 3N-2818 | [1] | BEARING | ||
| 9. | 4B-4229 | [1] | SPRING | |
| 10. | 1V-5770 | [1] | COLUMN AS | |
| 1V-5771 | [2] | BEARING | ||
| 11. | 2V-9167 | [1] | PIN | |
| 12. | 1V-5772 | [2] | PIN | |
| 1D-5121 | [4] | NUT-JAM (7/8-14-THD) | ||
| 4B-4284 | [4] | WASHER | ||
| 13. | 8V-6812 C | [1] | CAM-COLUMN LOCK | |
| 14. | 6V-5660 C | [1] | LOCK AS-CYLINDER | |
| 15. | 2V-7607 | [1] | COVER | |
| 16. | 4S-4465 | [4] | SCREW-TRUSS HEAD (1/4-20X0.625-IN) | |
| 17. | 9K-6762 | [1] | PIN | |
| 18. | 9K-6666 | [1] | ROD | |
| 19. | 9K-6764 | [1] | KNOB | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13770699
2V-2548: VALVE & LINES GP-STEERING NEUT
2V-2548 VALVE & LINES GP-STEERING NEUT
S/N 49Z1-99999
NEUTRALIZER
PART OF 7V-6726 HYDRAULIC AR
S/N 49Z1-99999
NEUTRALIZER
PART OF 7V-6726 HYDRAULIC AR
For full view, you need register
Parts for your 992C WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 030-7947 | [1] | ELBOW | |
| 2. | 3J-1907 | [3] | SEAL-O-RING | |
| 3. | 8T-9389 | [2] | BOLT (1/2-13X2.75-IN) | |
| 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 4. | 3V-5541 | [1] | MANIFOLD | |
| 5. | 2R-6806 | [1] | CONNECTOR | |
| 6. | 3V-3489 CI | [3] | HOSE AS | |
| 7. | 7S-1912 | [2] | CLIP | |
| 8. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9. | 3V-3491 I | [1] | HOSE AS | |
| 10. | 030-6816 | [1] | ELBOW | |
| 1J-9671 | [1] | SEAL-O-RING | ||
| 11. | 3V-3488 | [1] | TUBE AS | |
| 12. | 9X-8291 | [2] | BOLT-FLAT HEAD (1/2-13X2.75-IN) | |
| 1D-5117 | [4] | NUT-JAM (1/2-13-THD) | ||
| 13. | 9S-6843 CI | [1] | HOSE AS | |
| 14. | 030-7942 | [1] | ELBOW | |
| 15. | 6K-9354 | [1] | CONNECTOR | |
| 16. | 1J-9671 | [2] | SEAL-O-RING | |
| 17. | 3V-2569 | [1] | BRACKET AS | |
| 18. | 5P-2566 | [8] | BOLT (1/2-13X1.5-IN) | |
| 19. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 20. | 3V-2564 | [1] | BRACKET AS | |
| 21. | 2R-6806 | [3] | CONNECTOR | |
| 22. | 3J-1907 | [7] | SEAL-O-RING | |
| 23. | 8T-9377 | [6] | BOLT (3/8-16X2.25-IN) | |
| 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 24. | 031-6281 | [1] | TEE-FLARED | |
| 25. | 8J-1553 Y | [2] | VALVE GP-STEERING NEUTRALIZER | |
| 26. | 030-7947 | [3] | ELBOW | |
| 27. | 030-7942 | [1] | ELBOW | |
| 28. | 8K-3504 I | [1] | HOSE AS | |
| 29. | 3V-3492 I | [1] | HOSE AS | |
| 30. | 7S-1912 | [2] | CLIP | |
| 31. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 1S-1015 | [1] | CLIP | |
| 33. | 5P-2228 | [1] | BOLT (1/2-13X1-IN) | |
| 34. | 3V-5536 | [1] | TUBE AS | |
| 35. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 992C :
Truck sale:
45.000
